Product Data Sheet CO-600V Series Voltage Controlled Crystal Oscillators Features * 155.52 MHz Standard, Other Frequencies Available From 10 MHz to 160 MHz * 155.52 MHz Prototypes Available In 2 Weeks * Jitter Performance <1 ps rms @ 155.52 MHz * Temperature Stability to 20 ppm -40C to +85C. * Aging: 10 ppm for 10 Years Typical * ECL or PECL Output * Complementary Output Available * Package: Single DIP, Gull Wing, or True Surface Mount FR4. Applications * SONET/SDH and ATM Equipment * Digital Switching * Transport Systems * Multiplexing Applications Description The model C0-600V Voltage Controlled Crystal Oscillator (VCXO) is available at frequencies from 10 MHz to 160 MHz. The units are ECL or PECL compatible and available in low profile, 4 pin and 5 pin single DIP, gull wing or FR4 packages. All have base dimensions of 20.32mm x 12.70mm (0.8" x 0.5"). Height is 10.8mm (.425"), 11.43mm (.45") and 5.72mm (.225") for the DIP, gull wing and FR4 package, respectively. Typical phase noise is -115 dBc at 1 kHz.The C0-600V VCXOs are ideal for SONET/SDH and ATM equipment, digital switching, transport systems and multiplexing applications requiring low jitter performance. CO-600V Series Voltage Controlled Crystal Oscillators Performance Characteristics Parameter Characteristic Frequency: Aging (typical @ 155.52 MHz): Jitter: Supply/Output (5%) Symmetry Rise/Fall Time: (20-80%) Current: (excluding output load current) Deviation/Stability Codes 155.52 MHz Standard (Other Frequencies Available from 10 MHz to 160 MHz) 10 ppm for 10 years <1 ps rms from 12 KHz to 20 MHz @ 155.52 MHz Supply Voltage Output +3.3Vdc or +5.0Vdc PECL -4.5Vdc or -5.2Vdc ECL 40%/60% to 60%/40% < 1.5 nanoseconds < 60 mA for single ended output due to internal pull down resistors < 50 mA for complementary output units (requires external loading) Code A D E G H J K S Temperature Range 0/+50C 0/+70C 0/+70C -20/+70C -20/+70C -40/+85C -40/+85C -40/+85C Temperature Stability 20 ppm 20 ppm 40 ppm 30 ppm 40 ppm 40 ppm 50 ppm 20 ppm *Minimum Deviation 50 ppm 50 ppm 100 ppm 60 ppm 100 ppm 60 ppm 100 ppm 50 ppm *Deviation is referenced to the specified output frequency. For example, in the ECL model CO-645VS at 155.52 MHz, at 25C and -0.5V control, the frequency is at least 50ppm below 155.52 MHz and at -4.5V control, the frequency is at least 50ppm above 155.52 MHz (negative transfer function for ECL units). Control Voltage: Modulation Rate: Linearity Phase Noise (Typical @ 155.52 MHz) Size: Supply Voltage +3.3 V +5.0 V -4.5 V -5.2 V Output PECL PECL ECL ECL Control Voltage & Transfer Function 0.3 to 3.0 V positive 0.5 to 4.5 V positive -0.5 to -4.5 V negative -0.5 to -4.5 V negative dc to 10 kHz standard dc to 100 kHz, 3 db response, optional 10% BSL Offset 10 Hz 100 Hz 1 kHz 10 kHz 50 kHz Phase Noise -50 dBc/Hz -80 dBc/Hz -115 dBc/Hz -135 dBc/Hz -140 dBc/Hz 0.8" x 0.5" x 0.425" (20.32 x 12.70 x 10.8 mm) max seated height for DIP 0.8" x 0.5" x 0.45" (20.32 x 12.70 x 11.43 mm) max seated height for Gull Wing 0.8" x 0.540" x 0.225" (20.32 x 13.72 x 5.72 mm)max seated height for Surface Mount Vectron International * 166 Glover Avenue, Norwalk, CT 06856 * Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON 2 CO-600V Series Voltage Controlled Crystal Oscillators Outline Drawings THRU-HOLE NOTES: 1. Pin numbers are for reference only. They do not appear on the unit. 2. Dimensions are in inches and (millimeters). PIN 1 7 8 9* 14 FUNCTION PECL ECL VCXO VCXO GROUND VEE OUTPUT Q Q OUTPUT Q Q VCC GND *Pin 9 present only on complementary output units GULL WING NOTES: 1. Pin numbers are for reference only. They do not appear on the unit. 2. Dimensions are in inches and (millimeters). PIN 1 7 8 9* 14 FUNCTION PECL ECL VCXO VCXO GROUND VEE OUTPUT Q Q OUTPUT Q Q VCC GND *Pin 9 present only on complementary output units Vectron International * 166 Glover Avenue, Norwalk, CT 06856 * Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON 3 CO-600V Series Voltage Controlled Crystal Oscillators Outline Drawing Surface Mount, FR4 NOTES: 1. Pin numbers are for reference only. They do not appear on the unit. 2. Dimensions are in inches and (millimeters). PIN 1 6** 7 8 9* 14 FUNCTION PECL VCXO DISABLE GND OUTPUT SIGNAL, Q OUTPUT SIGNAL, Q VCC ECL VCXO DISABLE VEE Q Q GND *Pin 9 present only on complementary output units **Disable = PECL high, oscillator shuts off. Floating or PECL is low normal operation. Vectron International * 166 Glover Avenue, Norwalk, CT 06856 * Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON 4 CO-600V Series Voltage Controlled Crystal Oscillators Tape and Reel Notes: 1. For surface mount FR4 base package only. 2. Maximum number of units per reel is 425. (Please specify length of start & stop leaders). Recommended Soldering Profile VCXO Characteristics positve transfer negative transfer (PECL Models) (ECL Models) Frequency Frequency Unipolar Control fo 0.3V or 0.5V Control Voltage 3V or 4.5V fo -4.5V Control Voltage -0.5V Vectron International * 166 Glover Avenue, Norwalk, CT 06856 * Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON 5 CO-600V Series Voltage Controlled Crystal Oscillators How To Order CO-6 Supply/Output 1 = 3.3V PECL 2 = 5.0V PECL 3 = -4.5V ECL 4 = -5.2V ECL V @ Frequency Deviation/Stability Code (from page 2) e.g. CO-612VS @ 155.52 MHz is a 3.3V PECL oscillator in a 4 pin gullwing package with a temperature stability of 20 ppm from -40C to +85C and a deviation of 50 ppm. Package 1 = 4 pin DIP single ended output 2 = 4 pin gullwing, single ended output 4 = 5 pin DIP, complementary outputs 5 = 5 pin gullwing, complementary outputs 7 = Surface mount, FR4 base, complementary outputs. (PECL currently available. Please ask if ECL is required) Visit Our Website at www.vectron.com For additional information please contact: www.vectron.com USA: Vectron International * 166 Glover Avenue, Norwalk, CT 06856 . . . . Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON EUROPE: In Denmark, Finland, Ireland, Israel, Norway, Spain, UK . . . . . . . Tel: 44 (0) 1703 766 288 * Fax: 44 (0) 1703 766 822 In Austria, Belgium, France, Germany, Italy, Luxembourg Netherlands, Sweden, Switzerland, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 72 63 6480 * Fax: 49 (0) 72 63 6196 ASIA: In China, Taiwan, Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 603-598-0070 * Fax: 603-598-0075 In Korea, Singapore, Australia, India . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 203-853-4433 * Fax: 203-849-1423 Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. (c) Vectron International 2000 Printed in USA 4/00