SLOS066S − SEPTEMBER 1975 − REVISED JULY 2008
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D2-kV ESD Protection for:
− LM224K, LM224KA
− LM324K, LM324KA
− LM2902K, LM2902KV, LM2902KAV
DWide Supply Ranges
− Single Supply ...3 V to 32 V
(26 V for LM2902)
− Dual Supplies . . . +1.5 V to +16 V
(+13 V for LM2902)
DLow Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
DCommon-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground
DLow Input Bias and Offset Parameters
− Input Offset Voltage ...3 mV Typ
A Versions ...2 mV Typ
− Input Offset Current ...2 nA Typ
− Input Bias Current...20 nA Typ
A Versions . . . 15 nA Typ
DDifferential Input Voltage Range Equal to
Maximum-Rated Supply Voltage ...32 V
(26 V for LM2902)
DOpen-Loop Differential Voltage
Amplification . . . 100 V/mV Typ
DInternal Frequency Compensation
description/ordering information
These devices consist of four independent
high-gain frequency-compensated operational
amplifiers that are designed specifically to operate
from a single supply over a wide range of voltages.
Operation from split supplies also is possible if the
difference between the two supplies is 3 V to 3 2 V
(3 V to 26 V for the LM2902), and VCC is at least
1.5 V more positive than the input common-mode
voltage. The low supply-current drain is
independent of the magnitude of the supply
voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional
operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For
example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and
provides the required interface electronics, without requiring additional ±15-V supplies.
Copyright 2008, Texas Instruments Incorporated
!" # $%&" !# '%()$!" *!"&+
*%$"# $ " #'&$$!"# '& ",& "&# &-!# #"%&"#
#"!*!* .!!"/+ *%$" '$&##0 *&# " &$&##!)/ $)%*&
"&#"0 !)) '!!&"&#+
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN−
1IN+
VCC
2IN+
2IN−
2OUT
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
LM124 . . . D, J, OR W PACKAGE
LM124A ...J OR W PACKAGE
LM224, LM224A, LM224K, LM224KA ...D OR N PACKAGE
LM324, LM324K . . . D, N, NS, OR PW PACKAGE
LM324A . . . D, DB, N, NS, OR PW PACKAGE
LM324KA . . . D, N, NS, OR PW PACKAGE
LM2902 . . . D, N, NS, OR PW PACKAGE
LM2902K . . . D, DB, N, NS, OR PW PACKAGE
LM2902KV, LM2902KAV ...D OR PW PACKAGE
(TOP VIEW)
3 2 1 20 19
910111213
4
5
6
7
8
18
17
16
15
14
4IN+
NC
GND
NC
3IN+
1IN+
NC
VCC
NC
2IN+
LM124, LM124A . . . FK PACKAGE
(TOP VIEW)
1IN−
1OUT
NC
3IN− 4IN−
2IN−
2OUT
NC
NC − No internal connection
3OUT 4OUT
'*%$"# $')!" " 11233 !)) '!!&"&# !& "&#"&*
%)&## ",&.#& "&*+ !)) ",& '*%$"# '*%$"
'$&##0 *&# " &$&##!)/ $)%*& "&#"0 !)) '!!&"&#+
SLOS066S − SEPTEMBER 1975 − REVISED JULY 2008
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
description/ordering information (continued)
ORDERING INFORMATION
TAVIOmax
AT 25°C
MAX
TESTED
VCC PACKAGE†ORDERABLE
PART NUMBER TOP-SIDE
MARKING
PDIP (N)
Tube of 25
LM324N LM324N
PDIP (N) Tube of 25 LM324KN LM324KN
Tube of 50 LM324D
LM324
SOIC (D)
Reel of 2500 LM324DR LM324
SOIC (D) Tube of 50 LM324KD
LM324K
Reel of 2500 LM324KDR LM324K
7 mV 30 V Reel of 2000 LM324NSR LM324
7 mV
30 V
SOP (NS) Tube of 50 LM324KNS
LM324K
SOP (NS)
Reel of 2000 LM324KNSR LM324K
Tube of 90 LM324PW
L324
TSSOP (PW)
Reel of 2000 LM324PWR L324
TSSOP (PW) Tube of 90 LM324KPW
L324K
Reel of 2000 LM324KPWR L324K
0°C to 70°C
PDIP (N)
Tube of 25 LM324AN LM324AN
0C to 70 C
PDIP (N) Tube of 25 LM324KAN LM324KAN
Tube of 50 LM324AD
LM324A
SOIC (D)
Reel of 2500 LM324ADR LM324A
SOIC (D) Tube of 50 LM324KAD
LM324KA
Reel of 2500 LM324KADR LM324KA
3 mV
30 V
Reel of 2000 LM324ANSR LM324A
3 mV 30 V SOP (NS) Tube of 50 LM324KANS
LM324KA
SOP (NS)
Reel of 2000 LM324KANSR LM324KA
SSOP (DB) Reel of 2000 LM324ADBR LM324A
Tube of 90 LM324APW
L324A
TSSOP (PW)
Reel of 2000 LM324APWR L324A
TSSOP (PW) Tube of 90 LM324KAPW
L324KA
Reel of 2000 LM324KAPWR L324KA
PDIP (N)
Tube of 25
LM224N LM224N
PDIP (N) Tube of 25 LM224KN LM224KN
5 mV
30 V
Tube of 50 LM224D
LM224
5 mV 30 V
SOIC (D)
Reel of 2500 LM224DR LM224
SOIC (D) Tube of 50 LM224KD
LM224K
−25°C to 85°C
Reel of 2500 LM224KDR LM224K
−25°C to 85°C
PDIP (N)
Tube of 25 LM224AN LM224AN
PDIP (N) Tube of 25 LM224KAN LM224KAN
3 mV
30 V
Tube of 50 LM224AD
LM224A
3 mV 30 V
SOIC (D)
Reel of 2500 LM224ADR LM224A
SOIC (D) Tube of 50 LM224KAD
LM224KA
Reel of 2500 LM224KADR LM224KA
†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
SLOS066S − SEPTEMBER 1975 − REVISED JULY 2008
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ORDERING INFORMATION (CONTINUED)
TAVIOmax
AT 25°C
MAX
TESTED
VCC PACKAGE†ORDERABLE
PART NUMBER TOP-SIDE
MARKING
PDIP (N)
Tube of 25 LM2902N LM2902N
PDIP (N) Tube of 25 LM2902KN LM2902KN
Tube of 50 LM2902D
LM2902
SOIC (D)
Reel of 2500 LM2902DR LM2902
SOIC (D) Tube of 50 LM2902KD
LM2902K
Reel of 2500 LM2902KDR LM2902K
Reel of 2000 LM2902NSR LM2902
26 V SOP (NS) Tube of 50 LM2902KNS
LM2902K
7 mV
26 V
SOP (NS)
Reel of 2000 LM2902KNSR LM2902K
−40°C to 125°C
7 mV
SSOP (DB)
Tube of 80 LM2902KDB
L2902K
−40 C to 125 C
SSOP (DB) Reel of 2000 LM2902KDBR L2902K
Tube of 90 LM2902PW
L2902
TSSOP (PW)
Reel of 2000 LM2902PWR L2902
TSSOP (PW) Tube of 90 LM2902KPW
L2902K
Reel of 2000 LM2902KPWR L2902K
32 V
SOIC (D) Reel of 2500 LM2902KVQDR L2902KV
32 V
TSSOP (PW) Reel of 2000 LM2902KVQPWR L2902KV
2 mV
32 V
SOIC (D) Reel of 2500 LM2902KAVQDR L2902KA
2 mV
32 V
TSSOP (PW) Reel of 2000 LM2902KAVQPWR L2902KA
CDIP (J) Tube of 25 LM124J LM124J
CFP (W) Tube of 25 LM124W LM124W
5 mV 30 V LCCC (FK) Tube of 55 LM124FK LM124FK
−55°C to 125°C
5 mV
30 V
SOIC (D)
Tube of 50 LM124D
LM124
−55
°
C to 125
°
C
SOIC (D) Reel of 2500 LM124DR LM124
CDIP (J) Tube of 25 LM124AJ LM124AJ
2 mV 30 V CFP (W) Tube of 25 LM124AW LM124AW
2 mV
30 V
LCCC (FK) Tube of 55 LM124AFK LM124AFK
†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
symbol (each amplifier)
−
+
IN−
IN+
OUT
SLOS066S − SEPTEMBER 1975 − REVISED JULY 2008
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
schematic (each amplifier)
To Other
Amplifiers
≈6-µA
Current
Regulator
VCC
OUT
GND
IN−
IN+
≈100-µA
Current
Regulator
≈50-µA
Current
Regulator
COMPONENT COUNT
(total device)
Epi-FET
Transistors
Diodes
Resistors
Capacitors
1
95
4
11
4
≈6-µA
Current
Regulator
†ESD protection cells - available on LM324K and LM324KA only
†
†
SLOS066S − SEPTEMBER 1975 − REVISED JULY 2008
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
LM2902 ALL OTHER
DEVICES UNIT
Supply voltage, VCC (see Note 1) ±13 or 26 ±16 or 32 V
Differential input voltage, VID (see Note 2) ±26 ±32 V
Input voltage, VI (either input) −0.3 to 26 −0.3 to 32 V
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,
VCC ≤ 15 V (see Note 3) Unlimited Unlimited
D package 86 86
DB package 96 96
Package thermal impedance, θ
JA
(see Notes 4 and 5) N package 80 80 °C/W
Package thermal impedance, θJA (see Notes 4 and 5)
NS package 76 76
C/W
PW package 113 113
FK package 5.61
Package thermal impedance, q
JC
(see Notes 6 and 7) J package 15.05 °C/W
Package thermal impedance, qJC (see Notes 6 and 7)
W package 14.65
C/W
Operating virtual junction temperature, TJ150 150 °C
Case temperature for 60 seconds FK package 260 °C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package 300 300 °C
Storage temperature range, Tstg −65 to 150 −65 to 150 °C
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values (except dif ferential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
2. Differential voltages are at IN+, with respect to IN−.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) − TC)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
ESD protection
TEST CONDITIONS TYP UNIT
Human-Body Model LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV ±2 kV
SLOS066S − SEPTEMBER 1975 − REVISED JULY 2008
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
†
TA
‡LM124
LM224 LM324
LM324K
UNIT
PARAMETER
TEST CONDITIONS†
TA‡
MIN TYP§MAX MIN TYP§MAX
UNIT
VIO
Input offset voltage
VCC = 5 V to MAX,
25°C 3 5 3 7
mV
VIO Input offset voltage
VCC = 5 V to MAX,
VIC = VICRmin, VO = 1.4 V Full range 7 9 mV
IIO
Input offset current
VO = 1.4 V
25°C 2 30 2 50
nA
IIO Input offset current VO = 1.4 V Full range 100 150 nA
IIB
Input bias current
VO = 1.4 V
25°C −20 −150 −20 −250
nA
IIB Input bias current VO = 1.4 V Full range −300 −500 nA
25°C
0 to
0 to
VICR
Common-mode
VCC = 5 V to MAX
25°C
0 to
V
CC
− 1.5
0 to
V
CC
− 1.5
V
VICR
Common-mode
input voltage range VCC = 5 V to MAX
Full range
0 to
0 to
V
input voltage range
Full range
0 to
V
CC
− 2
0 to
V
CC
− 2
RL = 2 kΩ25°C VCC − 1.5 VCC − 1.5
VOH
High-level
RL = 10 kΩ25°C
V
VOH
High-level
output voltage
VCC = MAX
RL = 2 kΩFull range 26 26 V
output voltage
VCC = MAX RL ≥ 10 kΩFull range 27 28 27 28
VOL Low-level
output voltage RL ≤ 10 kΩFull range 5 20 5 20 mV
AVD
Large-signal
differential voltage
VCC = 15 V, VO = 1 V to 11 V,
25°C 50 100 25 100
V/mV
AVD differential voltage
amplification
VCC = 15 V, VO = 1 V to 11 V,
RL ≥ 2 kΩFull range 25 15 V/mV
CMRR Common-mode
rejection ratio VIC = VICRmin 25°C 70 80 65 80 dB
kSVR
Supply-voltage
rejection ratio
25°C
65
100
65
100
dB
kSVR rejection ratio
(∆V
CC
/∆V
IO
)25°C 65 100 65 100 dB
VO1/VO2 Crosstalk
attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB
VCC = 15 V,
VID = 1 V,
Source
25°C −20 −30 −60 −20 −30 −60
VCC = 15 V,
VID = 1 V,
V
O
= 0 Source Full range −10 −10
mA
IOOutput current VCC = 15 V,
VID = −1 V,
Sink
25°C 10 20 10 20 mA
IO
Output current
VCC = 15 V,
VID = −1 V,
V
O
= 15 V Sink Full range 5 5
VID = −1 V, VO = 200 mV 25°C 12 30 12 30 µA
IOS Short-circuit
output current VCC at 5 V,
GND at −5 V VO = 0, 25°C±40 ±60 ±40 ±60 mA
Supply current
VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2
ICC Supply current
(four amplifiers) VCC = MAX,
VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 mA
†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for
testing purposes is 26 V for LM2902 and 30 V for the others.
‡Full range is −55°C to 125°C for LM124, −25°C to 85°C for LM224, and 0°C to 70°C for LM324.
§All typical values are at TA = 25°C.
SLOS066S − SEPTEMBER 1975 − REVISED JULY 2008
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
TA‡
LM2902 LM2902V
UNIT
PARAMETER
TEST CONDITIONS
†
TA
‡
MIN TYP§MAX MIN TYP§MAX UNIT
VCC = 5 V to
Non-A-suffix
25°C 3 7 3 7
VIO
Input offset voltage
VCC = 5 V to
MAX,
Non-A-suffix
devices Full range 10 10
mV
VIO Input offset voltage
MAX,
VIC = VICRmin
,
VO = 1.4 V
A-suffix
25°C 1 2 mV
VIC = VICRmin,
VO = 1.4 V
A-suffix
devices Full range 4
∆VIO/∆TInput offset voltage
temperature drift RS = 0 ΩFull range 7µV/°C
IIO
Input offset current
VO = 1.4 V
25°C 2 50 2 50
nA
IIO Input offset current VO = 1.4 V Full range 300 150 nA
∆IIO/∆TInput offset current
temperature drift Full range 10 pA/°C
IIB
Input bias current
VO = 1.4 V
25°C −20 −250 −20 −250
nA
IIB Input bias current VO = 1.4 V Full range −500 −500 nA
25°C
0 to
0 to
VICR
Common-mode
VCC = 5 V to MAX
25°C
0 to
V
CC
− 1.5
0 to
V
CC
− 1.5
V
VICR
Common-mode
input voltage range VCC = 5 V to MAX
Full range
0 to
0 to
V
input voltage range
Full range
0 to
V
CC
− 2
0 to
V
CC
− 2
RL = 2 kΩ25°C
VOH
High-level
RL = 10 kΩ25°C VCC − 1.5 VCC − 1.5
V
VOH
High-level
output voltage
VCC = MAX
RL = 2 kΩFull range 22 26 V
output voltage
VCC = MAX RL ≥ 10 kΩFull range 23 24 27
VOL Low-level
output voltage RL ≤ 10 kΩFull range 5 20 5 20 mV
AVD
Large-signal
differential voltage
VCC = 15 V, VO = 1 V to 11 V,
25°C 25 100 25 100
V/mV
AVD differential voltage
amplification
VCC = 15 V, VO = 1 V to 11 V,
RL ≥ 2 kΩFull range 15 15 V/mV
CMRR Common-mode
rejection ratio VIC = VICRmin 25°C 50 80 60 80 dB
kSVR
Supply-voltage
rejection ratio
25°C
50
100
60
100
dB
kSVR rejection ratio
(∆V
CC
/∆V
IO
)25°C 50 100 60 100 dB
VO1/VO2 Crosstalk
attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB
VCC = 15 V,
VID = 1 V,
Source
25°C −20 −30 −60 −20 −30 −60
VCC = 15 V,
VID = 1 V,
VO = 0 Source Full range −10 −10
mA
IOOutput current VCC = 15 V,
VID = −1 V,
Sink
25°C 10 20 10 20 mA
O
VCC = 15 V,
VID = −1 V,
V
O
= 15 V Sink Full range 5 5
VID = −1 V, VO = 200 mV 25°C 30 12 40 µA
IOS Short-circuit
output current VCC at 5 V,
GND at −5 V VO = 0, 25°C±40 ±60 ±40 ±60 mA
Supply current
VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2
ICC Supply current
(four amplifiers) VCC = MAX,
VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 mA
†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for
testing purposes is 26 V for LM2902 and 32 V for LM2902V.
‡Full range is −40°C to 125°C for LM2902.
§All typical values are at TA = 25°C.
4444444
444444
44
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
8POST OFFICE BOX 655303 DALLAS, TEXAS 75265
•
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
†
TA
‡LM124A LM224A LM324A,
LM324KA
UNIT
PARAMETER
TEST CONDITIONS†
TA‡
MIN TYP§MAX MIN TYP§MAX MIN TYP §MAX
UNIT
VIO
Input offset voltage
VCC = 5 V to 30 V,
25°C 2 2 3 2 3
mV
VIO Input offset voltage
VCC = 5 V to 30 V,
VIC = VICRmin, VO = 1.4 V Full range 445mV
IIO
Input offset current
VO = 1.4 V
25°C 10 2 15 2 30
nA
IIO Input offset current VO = 1.4 V Full range 30 30 75 nA
IIB
Input bias current
VO = 1.4 V
25°C −50 −15 −80 −15 −100
nA
IIB Input bias current VO = 1.4 V Full range −100 −100 −200 nA
VICR
Common-mode input
VCC = 30 V
25°C0 to
VCC − 1.5 0 to
VCC − 1.5 0 to
VCC − 1.5
V
VICR
Common-mode input
voltage range VCC = 30 V Full range 0 to
VCC − 2 0 to
VCC − 2 0 to
VCC − 2
V
RL = 2 kΩ25°C VCC − 1.5 VCC − 1.5 VCC − 1.5
V
OH
High-level output voltage
VCC = 30 V
RL = 2 kΩFull range 26 26 26 V
VOH
High-level output voltage
VCC = 30 V RL ≥ 10 kΩFull range 27 27 28 27 28
V
VOL Low-level output voltage RL ≤ 10 kΩFull range 20 5 20 5 20 mV
AVD
Large-signal differential
VCC = 15 V, VO = 1 V to 11 V,
25°C 50 100 50 100 25 100
V/mV
AVD
Large-signal differential
voltage amplification
VCC = 15 V, VO = 1 V to 11 V,
RL ≥2 kΩFull range 25 25 15 V/mV
CMRR Common-mode rejection ratio VIC = VICRmin 25°C 70 70 80 65 80 dB
kSVR Supply-voltage rejection ratio
(∆VCC/∆VIO)25°C 65 65 100 65 100 dB
VO1/VO2 Crosstalk attenuation f = 1 kHz to 20 kHz 25°C 120 120 120 dB
VCC = 15 V,
VID = 1 V,
Source
25°C −20 −20 −30 −60 −20 −30 −60
CC
VID = 1 V,
V
O
= 0
Source
Full range −10 −10 −10
mA
IOOutput current VCC = 15 V,
VID = −1 V,
Sink
25°C 10 10 20 10 20 mA
O
CC
VID = −1 V,
V
O
= 15 V Sink Full range 5 5 5
VID = −1 V, VO = 200 mV 25°C 12 12 30 12 30 µA
IOS Short-circuit output current VCC at 5 V, GND at −5 V,
VO = 0 25°C±40 ±60 ±40 ±60 ±40 ±60 mA
Supply current
VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2 0.7 1.2
ICC Supply current
(four amplifiers) VCC = 30 V, VO = 15 V,
No load Full range 1.4 3 1.4 3 1.4 3 mA
†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified.
‡Full range is −55°C to 125°C for LM124A, −25°C to 85°C for LM224A, and 0°C to 70°C for LM324A.
§All typical values are at TA = 25°C.
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
operating conditions, VCC = ±15 V, TA = 25°C
PARAMETER TEST CONDITIONS TYP UNIT
SR Slew rate at unity gain RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 1) 0.5 V/µs
B1Unity-gain bandwidth RL = 1 MΩ, CL = 20 pF (see Figure 1) 1.2 MHz
VnEquivalent input noise voltage RS = 100 Ω, VI = 0 V, f = 1 kHz (see Figure 2) 35 nV/√Hz
VO
−
+
RL
CL
VI
VCC+
VCC−
Figure 1. Unity-Gain Amplifier
VO
−
+
100 ΩVCC+
VCC−
RS
900
Ω
VI = 0 V
Figure 2. Noise-Test Circuit
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
5962-7704301VCA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
77043012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
7704301CA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
7704301DA ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
77043022A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
7704302CA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
7704302DA ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
JM38510/11005BCA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM124ADR OBSOLETE SOIC D 14 TBD Call TI Call TI
LM124AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM124AJ ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM124AJB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM124AWB ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
LM124D ACTIVE SOIC D 14 50 TBD CU NIPDAU Level-3-245C-168 HR
LM124DG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM124DR ACTIVE SOIC D 14 2500 TBD CU NIPDAU Level-3-245C-168 HR
LM124DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM124FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM124J ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM124JB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM124N OBSOLETE PDIP N 14 TBD Call TI Call TI
LM124W ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
LM124WB ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
LM224AD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224AN ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM224ANE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM224D ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DG4 ACTIVE SOIC D 14 50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 1
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
no Sb/Br)
LM224DR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KAD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KAN ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM224KANE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM224KD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KN ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM224KNE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM224N ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM224NE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM2902D ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 2
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
LM2902DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KAVQDR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS) CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2902KAVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KAVQPWR ACTIVE TSSOP PW 14 2000 TBD CU NIPDAU Level-1-250C-UNLIM
LM2902KAVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDB ACTIVE SSOP DB 14 80 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDBE4 ACTIVE SSOP DB 14 80 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDBG4 ACTIVE SSOP DB 14 80 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDBR ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KN ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM2902KNE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM2902KNSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 3
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
LM2902KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KVQDR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS) CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2902KVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KVQPWR ACTIVE TSSOP PW 14 2000 TBD CU NIPDAU Level-1-250C-UNLIM
LM2902KVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902N ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM2902NE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM2902NSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902NSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM2902PWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902QN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM324AD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI
LM324ADBR ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 4
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
no Sb/Br)
LM324ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324AN ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM324ANE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM324ANSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ANSRE4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM324APWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324D ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAN ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 5
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
(RoHS)
LM324KANE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM324KANS PREVIEW SO NS 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KANSG4 PREVIEW SO NS 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KANSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KANSRE4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KANSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KN ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM324KNE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM324KNS PREVIEW SO NS 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KNSG4 PREVIEW SO NS 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KNSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 6
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
LM324KPW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324N ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM324NE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
LM324NSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324NSRE4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324NSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM324PWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324Y OBSOLETE DIESALE Y 0 TBD Call TI Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 7
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM124, LM124-SP, LM124M, LM2902 :
•Automotive: LM2902-Q1
•Enhanced Product: LM2902-EP
NOTE: Qualified Version Definitions:
•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
•Enhanced Product - Supports Defense, Aerospace and Medical Applications
PACKAGE OPTION ADDENDUM
www.ti.com 18-Sep-2008
Addendum-Page 8
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0 (mm) B0 (mm) K0 (mm) P1
(mm) W
(mm) Pin1
Quadrant
LM224ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902KDBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
LM2902KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM2902KPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM2902NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM2902PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM324ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
LM324ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324APWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 16-Jul-2008
Pack Materials-Page 1
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0 (mm) B0 (mm) K0 (mm) P1
(mm) W
(mm) Pin1
Quadrant
LM324KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324KANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324KAPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM324KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324KPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM324NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM224ADR SOIC D 14 2500 346.0 346.0 33.0
LM224DR SOIC D 14 2500 346.0 346.0 33.0
LM224KADR SOIC D 14 2500 346.0 346.0 33.0
LM224KDR SOIC D 14 2500 346.0 346.0 33.0
LM2902DR SOIC D 14 2500 346.0 346.0 33.0
LM2902DR SOIC D 14 2500 333.2 345.9 28.6
LM2902KDBR SSOP DB 14 2000 346.0 346.0 33.0
LM2902KDR SOIC D 14 2500 346.0 346.0 33.0
LM2902KNSR SO NS 14 2000 346.0 346.0 33.0
PACKAGE MATERIALS INFORMATION
www.ti.com 16-Jul-2008
Pack Materials-Page 2
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM2902KPWR TSSOP PW 14 2000 346.0 346.0 29.0
LM2902NSR SO NS 14 2000 346.0 346.0 33.0
LM2902PWR TSSOP PW 14 2000 346.0 346.0 29.0
LM324ADBR SSOP DB 14 2000 346.0 346.0 33.0
LM324ADR SOIC D 14 2500 346.0 346.0 33.0
LM324ANSR SO NS 14 2000 346.0 346.0 33.0
LM324APWR TSSOP PW 14 2000 346.0 346.0 29.0
LM324DR SOIC D 14 2500 333.2 345.9 28.6
LM324DR SOIC D 14 2500 346.0 346.0 33.0
LM324KADR SOIC D 14 2500 346.0 346.0 33.0
LM324KANSR SO NS 14 2000 346.0 346.0 33.0
LM324KAPWR TSSOP PW 14 2000 346.0 346.0 29.0
LM324KDR SOIC D 14 2500 346.0 346.0 33.0
LM324KNSR SO NS 14 2000 346.0 346.0 33.0
LM324KPWR TSSOP PW 14 2000 346.0 346.0 29.0
LM324NSR SO NS 14 2000 346.0 346.0 33.0
LM324PWR TSSOP PW 14 2000 346.0 346.0 29.0
PACKAGE MATERIALS INFORMATION
www.ti.com 16-Jul-2008
Pack Materials-Page 3
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
Gage Plane
8,20
7,40
0,55
0,95
0,25
38
12,90
12,30
28
10,50
24
8,50
Seating Plane
9,907,90
30
10,50
9,90
0,38
5,60
5,00
15
0,22
14
A
28
1
2016
6,50
6,50
14
0,05 MIN
5,905,90
DIM
A MAX
A MIN
PINS **
2,00 MAX
6,90
7,50
0,65 M
0,15
0°–ā8°
0,10
0,09
0,25
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
MECHANICAL DATA
MLCC006B – OCTOBER 1996
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER
4040140/D 10/96
28 TERMINAL SHOWN
B
0.358
(9,09)
MAX
(11,63)
0.560
(14,22)
0.560
0.458
0.858
(21,8)
1.063
(27,0)
(14,22)
A
NO. OF
MINMAX
0.358
0.660
0.761
0.458
0.342
(8,69)
MIN
(11,23)
(16,26)
0.640
0.739
0.442
(9,09)
(11,63)
(16,76)
0.962
1.165
(23,83)
0.938
(28,99)
1.141
(24,43)
(29,59)
(19,32)(18,78)
**
20
28
52
44
68
84
0.020 (0,51)
TERMINALS
0.080 (2,03)
0.064 (1,63)
(7,80)
0.307
(10,31)
0.406
(12,58)
0.495
(12,58)
0.495
(21,6)
0.850
(26,6)
1.047
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.035 (0,89)
0.010 (0,25)
12
1314151618 17
11
10
8
9
7
5
432
0.020 (0,51)
0.010 (0,25)
6
12826 27
19
21
B SQ
A SQ 22
23
24
25
20
0.055 (1,40)
0.045 (1,14)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65 M
0,10
0,10
0,25
0,50
0,75
0,15 NOM
Gage Plane
28
9,80
9,60
24
7,90
7,70
2016
6,60
6,40
4040064/F 01/97
0,30
6,60
6,20
80,19
4,30
4,50
7
0,15
14
A
1
1,20 MAX
14
5,10
4,90
8
3,10
2,90
A MAX
A MIN
DIM PINS **
0,05
4,90
5,10
Seating Plane
0°–8°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers shouldobtain the latest relevant information before placing orders and should verify that such information is current and complete. All products aresold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standardwarranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except wheremandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products andapplications using TI components. To minimize the risks associated with customer products and applications, customers should provideadequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Informationpublished by TI regarding third-party products or services does not constitute a license from TI to use such products or services or awarranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectualproperty of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompaniedby all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptivebusiness practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additionalrestrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids allexpress and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is notresponsible or liable for any such statements.TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonablybe expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governingsuch use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, andacknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their productsand any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may beprovided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products insuch safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products arespecifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet militaryspecifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely atthe Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products aredesignated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designatedproducts in automotive applications, TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers amplifier.ti.com Audio www.ti.com/audioData Converters dataconverter.ti.com Automotive www.ti.com/automotiveDLP® Products www.dlp.com Broadband www.ti.com/broadbandDSP dsp.ti.com Digital Control www.ti.com/digitalcontrolClocks and Timers www.ti.com/clocks Medical www.ti.com/medicalInterface interface.ti.com Military www.ti.com/militaryLogic logic.ti.com Optical Networking www.ti.com/opticalnetworkPower Mgmt power.ti.com Security www.ti.com/securityMicrocontrollers microcontroller.ti.com Telephony www.ti.com/telephonyRFID www.ti-rfid.com Video & Imaging www.ti.com/videoRF/IF and ZigBee® Solutions www.ti.com/lprf Wireless www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2009, Texas Instruments Incorporated
