Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de PID-Controller UR3274S l l l l l PID-Controller in 32 x 74 mm format Universal input fur process signals, thermocouple, RTD 3-digit LED display Easy programming via software or push buttons Two setpoints as relay and one SSR output Wiring plan: Universalregler, 2 SW, 2 Relais, SSR Supply: 12 bis 35 VDC; 12/24 VAC P/N: UR3274S1 2-Draht 4/20mA I V/I 12/24V ~ 12...35V... 5A 230V Resistiv +VDC PTC/NTC 3 4 5 6 7 8 9 10 Tc + 2 + 1 10A 230V Resistiv + - PT/NI100/1K SSR 1 + - wp-direkt.de 11 12 Speicher UR3274S1 Universalregler, 2 SW, 2 Relais, SSR Supply: 230 VAC; 4,6 VA P/N: UR3274S3 Input ranges: Configuration of the input signal via software or push buttons. Thermocouples type K, S, R, J. RTD: Pt100, Pt500, Pt1000, Ni100, PTC1K, NTC10K Linear inputs: 0 V to 10 V, 0/4 mA to 20 mA Potentiometer: 1 kOhm to 6/160 kOhm Accurracy: Tolerance at 25 C +/-0.5 % 1 digit for thermocouple and RTD input, RTD input; +/-0.2 % 1 digit for analogue input signal. Measuring rate: Programmable up to 66 msec. (15 Hz). Relay output: (UR3274S1): 1 change over relay with 10 A @ 230 VAC and 1 closing contact with 5 A @ 230 VAC. (UR3274S3): 1 change over relay with 8 A @ 230 VAC and 1 closing contact with 5 A @ 230 VAC. Programmable as controller output for heating/cooling and/or alarm. SSR output: UR3274S1: 12 VDC @ max. 30 mA at 12 VDC supply 35 VDC @ max. 30 mA at 35 VDC supply UR3274S3: 8 VDC @ max. 20 mA Attention: Ground/Minus output will be switched. Programmable as controller output for heating/cooling and/or alarm. 8A 230V Resistiv Q1 ~ 5A 230V Resistiv Q2 +VDC PTC/NTC SSR 1 1 2 3 4 5 6 7 8 9 10 11 Tc + Buttons: 4 push buttons for programming and setting up the setpoints. PT/NI100/1K + Display: 3-digit red LED-Display Upper line: Process value, 4-digit, green with 10.2 mm digits Lower line: Setpoint, 4-digit, red with 7,6 mm digits 230V + - wp-direkt.de This small universal controller is a compact all-rounder. With the universal input for the most common temperature sensors and process signals and the newest programming and control technologies, this small PID-controller is the best solution forsmall and easy applications. Beside the excellent price/performance-ratio, this controller convinces with his robust housing and brilliant display. UR3274S3: I Versorgung V/I UR3274Sx Supply: UR3274S1: 4/20mA 2-Draht 12 Speicher UR3274S3 Protection class: IP65 from the front (with rubber sealing), back plane IP20. Dimensions: W 74 mm x H 32 mm x D 53 mm. Panel cut out 28,5 mm x 70,5 mm. Connection: Via terminal block. Ambient conditions: Operating temperature: 0 C to +45 C; relative humidity 35 % to 95 %. rF, non condensing. Weight: 100 gramms. Scope of delivery: Controller, mounting clamp, sealing, manual. Functionality: Control algorithms: ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned, dead band. Additionally open / close logic for motorized valves. Tuning: Manual or automatic tuning selectable. Alarm modes: Absolute / Threshold, band, High / Low deviation. Alarm with optional manual reset . Second controller output (cooling): Programmable instead of alarm output with P., P.I., P.I.D., P.D. time proportioned with dead band. 12 VAC to 24 VAC 10 %, 50/60 Hz or 12 VDC to 35 VDC, 230 VAC 10 %, 50/60 Hz Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestrae 7, D-65366 Geisenheim, Tel.: 06722/9965-20, Fax: -78, Stand: 07.05.2012. All information without guarantee and subject to change. Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de PID-Controller UR3274S Data protection: Lock of command / alarm setpoint - Access to parameters by password. Panel cut out 28,5 x 70,5 mm Suggested thickness 2 bis 8 mm Memory card (optional) with battery Dimensions Programming: The controller will be programmed via push buttons or WindowsTM-software. The memory card is battery powered. With this technology you can programm the controller without powering it up (up to 1000 programm cycles with one battery). Order codes Type Order-No. PID Controller, 32 x 74 12 to 35 VDC supply 230 VAC supply UR3274S1 UR3274S3 Accessories Programming module with USB cable Software download under: SFUR0KIT http://www.wachendorff.de/wp/dpc_dow_epg_sof.html Din rail power supply, 24 VDC, 3 A PS24V03AA Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestrae 7, D-65366 Geisenheim, Tel.: 06722/9965-20, Fax: -78, Stand: 07.05.2012. All information without guarantee and subject to change.