PID-Controller UR3274S
l
l
l
l
l
Universal input für process signals, thermocouple, RTD
3-digit LED display
Easy programming via software or push buttons
Two setpoints as relay and one SSR output
PID-Controller in 32 x 74 mm format
This small universal controller is a compact all-rounder. With the
universal input for the most common temperature sensors and
process signals and the newest programming and control
technologies, this small PID-controller is the best solution forsmall and
easy applications.
Beside the excellent price/performance-ratio, this controller
convinces with his robust housing and brilliant display.
4 push buttons for programming and setting up the
setpoints.
Configuration of the input signal via software or push
buttons.
Thermocouples type K, S, R, J.
RTD: Pt100, Pt500, Pt1000, Ni100, PTC1K, NTC10K
Linear inputs: 0 V to 10 V, 0/4 mA to 20 mA
Potentiometer: 1 kOhm to 6/160 kOhm
Tolerance at 25 °C +/-0.5 % ± 1 digit for thermocouple and
RTD input, RTD input; +/-0.2 % ± 1 digit for analogue input signal.
Programmable up to 66 msec. (15 Hz).
(UR3274S1): 1 change over relay with 10 A@ 230 VAC and 1 closing
contact with 5A@ 230 VAC.
(UR3274S3): 1 change over relay with 8 A @ 230 VAC and 1 closing
contact with 5A @ 230 VAC.
Programmable as controller output for heating/cooling and/or alarm.
UR3274S1: 12 VDC @ max. 30 mA at 12 VDC supply
35 VDC @ max. 30 mA at 35 VDC supply
UR3274S3: 8 VDC @ max. 20 mA
Attention: Ground/Minus output will be switched.
Programmable as controller output for heating/cooling and/or alarm.
UR3274S1: 12 VAC to 24 VAC ±10 %, 50/60 Hz or 12 VDC
to 35 VDC,
UR3274S3: 230 VAC ±10 %, 50/60 Hz
Display: 3-digit red LED-Display
Upper line: Process value, 4-digit, green with 10.2 mm digits
Lower line: Setpoint, 4-digit, red with 7,6 mm digits
Buttons:
Input ranges:
Accurracy:
Measuring rate:
Relay output:
SSR output:
Supply:
Wachendorff Prozesstechnik GmbH & Co. KG
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff.de
Wiring plan:
Protection class:
Dimensions:
Connection:
Ambient conditions:
Weight:
Scope of delivery:
Functionality:
Tuning:
Alarm modes:
Second controller output (cooling):
IP65 from the front (with rubber sealing), back plane
IP20.
W 74 mm x H 32 mm x D 53 mm. Panel cut out 28,5 mm x
70,5 mm.
Via terminal block.
Operating temperature: 0 °C to +45 °C; relative
humidity 35 % to 95 %. rF, non condensing.
100 gramms.
Controller, mounting clamp, sealing, manual.
Control algorithms: ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time
proportioned, dead band. Additionally open / close logic for motorized
valves.
Manual or automatic tuning selectable.
Absolute / Threshold, band, High / Low deviation. Alarm
with optional manual reset .
Programmable instead of alarm
output with P., P.I., P.I.D., P.D. time proportioned with dead band.
Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestraße 7, D-65366 Geisenheim, Tel.: 06722/9965-20, Fax: -78, Stand: 07.05.2012.
All information without guarantee and subject to change.
UR3274Sx
UR3274S1
UR3274S3
PTC/NTC
-
+
Tc
+VDC
SSR
123456789
10 11 12
-
+
I
V/I
+
-
PT/NI100/1K
2-Draht 4/20mA
Versorgung
Speicher
1
230V
~
8A 230V
Resistiv
Q1
5A 230V
Resistiv
Q2
Universalregler, 2 SW, 2 Relais, SSR
P/N: UR3274S3
Supply: 230 VAC; 4,6 VA
wp-direkt.de
PTC/NTC
-
+
Tc
+VDC
SSR
123456789
10 11 12
-
+
I
V/I
+
-
PT/NI100/1K
Speicher
1
-
+
12...35V...
12/24V~
Universalregler, 2 SW, 2 Relais, SSR
Supply: 12 bis 35 VDC; 12/24 VAC
P/N: UR3274S1
wp-direkt.de
2-Draht 4/20mA
10A 230V
Resistiv 5A 230V
Resistiv
Wachendorff Prozesstechnik GmbH & Co. KG
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff.de
Programming: The controller will be programmed via push
buttons or Windows™-software. The memory card is battery
powered. With this technology you can programm the controller
without powering it up (up to 1000 programm cycles with one battery).
Order codes
Type Order-No.
Accessories
PID Controller, 32 x 74
12 to 35 VDC supply UR3274S1
230 VAC supply UR3274S3
Programming module with USB cable SFUR0KIT
Software download under:
http://www.wachendorff.de/wp/dpc_dow_epg_sof.html
Din rail power supply, 24 VDC, 3 A PS24V03AA
Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestraße 7, D-65366 Geisenheim, Tel.: 06722/9965-20, Fax: -78, Stand: 07.05.2012.
All information without guarantee and subject to change.
Dimensions
Data protection: Lock of command / alarm setpoint - Access to
parameters by password.
PID-Controller UR3274S
Panel cut out
28,5 x 70,5 mm
Suggested thickness
2bis8mm
Memory card
(optional) with battery
