Vertical Female Connectors Type A 110 signal contacts 50 mm with multifunction block (for positioning and coding) ERmet 2.0mm The ERmet type A vertical female connector provides 110 contacts in a 5 row x 22 position fully loaded configuration. Versions with optional "z" and "f" row shields are available as well as extended terminals for use in stacking applications with rear shrouds. Two spacer heights are also available: 3.1 mm and 9.6 mm to provide additional component clearance. The ERmet type A female connector has a multifunctional cavity that incorporates pre-alignment pins and optional coding keys. The pressfit terminals provide a convenient and reliable gas tight connection. This connector may be used alone or in conjunction with Type B and C vertical female connectors. Dimensional drawings and board hole pattern 12.25 Id.-Nr. Anforderungsstufe class 11.4 Catalog E 074482 12 Note: The numbering on the connectors themselves is in accordance with the IEC 61076-4-101 standard. All dimensions in mm. 3 Datum date XXXX 1 max. 0.6 3 1 11 3.7 0.2 50 max. 1 max. 15 25 a b 2 c d 8 e 3.65 10 x 2 = 20 8 Lochbild fur Leiterplatte (Bestuckungsseite) 10 x 2 = 0.6 2 10 x 2 = 4x2= 2 20 Board hole pattern (Component mounting side) alle Locher 8 ( 20 ) 10 x 2 = ( 20 ) -all holes 0.05 0.05 2 durchkontaktiert, Bohrloch 0.7 0.02 plated thru, drill hole 0.7 0.02 2 a b c d 11 15 25 4x2= 1 (8) e 08/06 Edition 4 www.erni.com 105 Vertical Female Connectors Type A * Termination + Board To Board Distance Version 5 Version Without Shield Version 3 Version 4 3.1 3.1 1 15-16.5 2 15-16.5 3 18.4-20 4 18.4-20 5 25-26.5 3.7 0.2 13 0.2 Board To Board Distance * Board To Board Version Distance 13 0.2 3.7 0.2 9.6 Version 2 3.7 0.2 Version 1 * based on contact level 1 other board to board distances for remaining levels on request (Please contact our Customer Service) Version 10 Version With Shield Version 8 106 15-16.5 8 18.4-20 9 18.4-20 10 25-26.5 9.6 3.1 3.7 0.2 13 0.2 16 0.2 Distance 15-16.5 7 Board To Board Board To Board Distance * 6 3.1 13 0.2 16 0.2 3.7 0.2 Note: All dimensions in mm. Version Version 9 Version 7 3.7 0.2 Version 6 * based on contact level 1 other board to board distances for remaining levels on request (Please contact our Customer Service) Catalog E 074482 08/06 Edition 4 www.erni.com Vertical Female Connectors Type A Ordering Information Configuration Used For Part Number ERmet 2.0mm No. of Pins Type A Without Shield, Without Peg Version 1 * 110 104702 110 114007 110 114009 110 114011 110 114013 XXXX Type A Without Shield, Without Peg Version 2 * XXXX ERNI 114007 2 Type A Without Shield, Without Peg Version 3 * XXXX ERNI 114009 2 Type A Without Shield, Without Peg Version 4 * XXXX ERNI 114011 2 Type A Without Shield, Without Peg Version 5 * XXXX Catalog E 074482 ERNI 08/06 114013 2 Edition 4 www.erni.com 107 Vertical Female Connectors Type A Ordering Information Configuration Used For No. of Pins Part Number Type A With Shield, Without Peg Version 6 * 1 XXXX ERNI 104112 2 110 104112 110 114008 110 114010 110 114012 110 114014 25 Type A With Shield, Without Peg Version 7 * 1 XXXX ERNI 114008 2 25 Type A With Shield, Without Peg Version 8 * 1 XXXX ERNI 114010 2 25 Type A With Shield, Without Peg Version 9 * 1 XXXX ERNI 114012 2 25 Type A With Shield, Without Peg Version 10 * 1 108 XXXX ERNI 114014 2 25 Catalog E 074482 08/06 Edition 4 www.erni.com