A Product Line of Diodes Incorporated ZXTP2012Z 60V PNP SILICON PLANAR MEDIUM POWER TRANSISTOR IN SOT89 Features Mechanical Data * * * * * * * * * * * BVCEO > -60V High current capability Max Continuous Current IC = -4.3A Low saturation voltage VCE(sat) < -65mV @ IC = -1A Lead Free, RoHS Compliant (Note 1) Halogen and Antimony Free, "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability Case: SOT89 Moisture Sensitivity: Level 1 per J-STD-020 UL Flammability Rating 94V-0 Terminals: Matte Tin Finish Weight: 0.052 grams (Approximate) Application * * * * * Emergency lighting circuits Motor driving (including DC fans) Backlight inverters Power switches MOSFET gate drivers SOT89 Device symbol Top View Pin-out Top Ordering Information (Note 3 & 4) Product ZXTP2012ZTA ZXTP2012Z-13R ZXTP2012ZQTA Notes: Grade Commercial Commercial Automotive Marking 951 951 951 Reel size (inches) 7 7 7 Tape width (mm) 12 12 12 Quantity per reel 1,000 4,000 1,000 1. No purposefully added lead. 2. Halogen and Antimony Free. Diodes Inc's "Green" Policy can be found on our website at http://www.diodes.com 3. For packaging details, go to our website at http://www.diodes.com 4. Products with Q-suffix are automotive grade Marking Information 951 = Product Type Marking Code ZXTP2012Z Datasheet Number: DS33713 Rev. 2 - 2 1 of 7 www.diodes.com July 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZXTP2012Z Maximum Ratings @TA = 25C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current (Note 5) Peak Pulse Current Thermal Characteristics Value -100 -60 -7 -4.3 -15 Unit V V V A A Value 1.5 12 2.1 16.8 83 60 3.23 -55 to +150 Unit W mW/C W mW/C C/W C/W C/W C @TA = 25C unless otherwise specified Characteristic Power Dissipation (Note 5) Linear derating factor Power Dissipation (Note 6) Linear derating factor Thermal Resistance, Junction to Ambient (Note 5) Thermal Resistance, Junction to Ambient (Note 6) Thermal Resistance, Junction to Leads (Note 7) Operating and Storage Temperature Range Notes: Symbol VCBO VCEO VEBO IC ICM Symbol PD PD RJA RJA RJL TJ,TSTG 5. For a device surface mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. 6. For a device surface mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. 7. Thermal resistance from junction to solder-point (on the exposed collector pad). ZXTP2012Z Datasheet Number: DS33713 Rev. 2 - 2 2 of 7 www.diodes.com July 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZXTP2012Z VCE(sat) 10 Limit DC 1 1s 100ms 100m Single Pulse. T 10ms =25C amb 1ms 100s 25X25mm PCB 1oz copper 10m 100m 1 10 100 -VCE Collector-Emitter Voltage (V) Max Power Dissipation (W) -IC Collector Current (A) Thermal Characteristics 2.0 5 0 X 5 0 m m PCB 1 oz copper 1.5 1.0 2 5 X 2 5 m m PCB 1 oz copper 0.5 0.0 0 20 D=0.5 40 Single Pulse 20 D=0.05 D=0.1 1m 10m 100m 1 10 100 Pulse Width (s) 1k Max Power Dissipation (W) Thermal Resistance (C/W) 60 0 100 100 120 140 160 Single Pulse. Tamb=25C 25X25mm PCB 1oz copper 100 10 1 100 Transient Thermal Impedance ZXTP2012Z Datasheet Number: DS33713 Rev. 2 - 2 80 Derating Curve 2 5 X 2 5 m m PCB 1 oz copper ) D=0.2 60 Temperature (C) Safe Operating Area 80 40 3 of 7 www.diodes.com 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation July 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZXTP2012Z Electrical Characteristics @TA = 25C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Notes 8) Collector-Emitter Breakdown Voltage (Notes 8) Emitter-Base Breakdown Voltage Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current Symbol BVCBO BVCER BVCEO BVEBO Min -100 -100 -60 -7 ICBO - ICER R 1k IEBO - Typ. -120 -120 -80 -8.1 < -1 < -1 Max -20 -500 Unit V V V V nA nA -20 -500 -10 nA nA nA - < -1 hFE 100 100 45 10 250 200 90 25 Collector-Emitter Saturation Voltage (Notes 8) VCE(sat) - -14 -50 -75 -160 -20 -65 -110 -215 mV Base-Emitter Saturation Voltage (Notes 8) Base-Emitter Turn-on Voltage (Notes 8) VBE(sat) VBE(on) - -950 -840 -1050 -950 mV mV fT - 120 - MHz Cobo tON - 48 39 - pF - ns DC current transfer Static ratio (Notes 8) Transitional Frequency (Notes 8) Output capacitance Switching Time Notes: tOFF - 370 300 Test Condition IC = -100A IC = -1A, RB1k IC = -10mA IE = -100A VCB = -80V VCB = -80V, TA = 100C VCB = -80V VCB = -80V, TA = 100C VEB = -6V IC = -10mA, VCE = -1V IC = -2A, VCE = -1V IC = -5A, VCE = -1V IC = -10A, VCE = -1V IC = -100mA, IB = -10mA IC = -1A, IB = -100mA IC = -2A, IB = -200mA IC = -5A, IB = -500mA IC = -5A, VCE = -1V IC = -5A, VCE = -1V IC = -100mA, VCE = -10V, f = 50MHz VCB = -10V, f = 1MHz, VCC = -10V, IC = -1A, IB1 = IB2 =-100mA 8. Measured under pulsed conditions. Pulse width 300s. Duty cycle 2%. ZXTP2012Z Datasheet Number: DS33713 Rev. 2 - 2 4 of 7 www.diodes.com July 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZXTP2012Z Typical Electrical Characteristics 0.5 1 Tamb=25C IC/IB=10 0.4 - VCE(SAT) (V) - VCE(SAT) (V) IC/IB=50 100m IC/IB=20 IC/IB=10 0.3 100C 0.2 25C 0.1 10m 1m -55C 10m 100m 1 0.0 1m 10 - IC Collector Current (A) 10m 1.4 250 1.2 25C 0.8 150 0.6 100 0.4 -55C 50 0.2 0.0 1m 10m 100m 1 10 -55C - VBE(SAT) (V) 200 1.0 10 IC/IB=10 Typical Gain (hFE) Normalised Gain 1.2 300 VCE=1V 100C 1 VCE(SAT) v IC VCE(SAT) v IC 1.4 100m - IC Collector Current (A) 1.0 25C 0.8 0.6 100C 0.4 0 1m 10m 100m 1 10 - IC Collector Current (A) - IC Collector Current (A) hFE v IC VBE(SAT) v IC 1.4 1.2 VCE=1V - VBE(ON) (V) -55C 1.0 25C 0.8 0.6 0.4 1m 100C 10m 100m 1 10 - IC Collector Current (A) VBE(ON) v IC ZXTP2012Z Datasheet Number: DS33713 Rev. 2 - 2 5 of 7 www.diodes.com July 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZXTP2012Z Package Outline Dimensions R0 D1 .2 00 C E H L B e B1 e1 8 (4 X) A SOT89 Dim Min Max A 1.40 1.60 B 0.44 0.62 B1 0.35 0.54 C 0.35 0.43 D 4.40 4.60 D1 1.52 1.83 E 2.29 2.60 e 1.50 Typ e1 3.00 Typ H 3.94 4.25 L 0.89 1.20 All Dimensions in mm D Suggested Pad Layout X1 X2 (2x) Y1 Y3 Y4 Y2 Y Dimensions Value (in mm) X 0.900 X1 1.733 X2 0.416 Y 1.300 Y1 4.600 Y2 1.475 Y3 0.950 Y4 1.125 C 1.500 C X (3x) ZXTP2012Z Datasheet Number: DS33713 Rev. 2 - 2 6 of 7 www.diodes.com July 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZXTP2012Z IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2011, Diodes Incorporated www.diodes.com ZXTP2012Z Datasheet Number: DS33713 Rev. 2 - 2 7 of 7 www.diodes.com July 2011 (c) Diodes Incorporated