BULLET TERMINAL Nominal 4.0mm dia. bullet male S D Recognized E60389 Certified LR20812 Dimensions(mm) Applicable wire Model No. Standard L mm2 AWG # Insulation O.D. (mm) 0.5 to 2.0 20 to 14 2.6 to 3.8 Material Brass Finish D (dia.) L 3.55 15.9 S Material thickness Qty / reel - SGM-51-4 SGM-51T-4 Tin-plated 7.3 0.5 5,000 RoHS compliance Nominal 4.0mm dia. bullet female D Recognized E60389 Certified LR20812 Dimensions(mm) Applicable wire Model No. Standard SGF-41-4 L S mm2 AWG # Insulation O.D. (mm) 0.5 to 1.25 20 to 16 2.6 to 3.5 SGF-41T-4 RoHS compliance Material Brass Finish D (dia.) L 3.5 17.5 S Material thickness - Tin-plated 6.4 0.32 Qty / reel 7,500 Nominal 5.0mm dia. bullet male S D Recognized E60389 Certified LR20812 Dimensions(mm) Applicable wire Model No. SGM-21-5 SGM-21T-5 SGM-51-5 SGM-51T-5 RoHS compliance 520 Standard L mm2 AWG # Insulation O.D. (mm) 0.3 to 0.75 22 to 18 1.7 to 2.9 0.5 to 2.0 20 to 14 Material D (dia.) L 3.96 17.5 S Material thickness Qty / reel - Brass 2.6 to 3.8 Finish Tin-plated - Tin-plated 8.9 0.5 5,000 BULLET TERMINAL Nominal 5.0mm dia. bullet female Type A D L S Recognized E60389 Certified LR20812 Dimensions(mm) Applicable wire Model No. Standard SGF-21-5 mm2 AWG # Insulation O.D. (mm) 0.3 to 0.75 22 to 18 1.7 to 2.9 Material Type Finish D (dia.) L 3.96 17.5 Qty / reel Material thickness S - SGF-21T-5 Brass SGF-51-5 A Tin-plated 6.4 0.4 5,000 - 0.5 to 2.0 SGF-51T-5 20 to 14 2.6 to 3.8 Tin-plated Crimping machine, Applicator Contact Crimping machine Crimp applicator SGM-51(T)-4 SGF-41(T)-4 SGM-21(T)-5 Applicator Dies Crimp applicator with dies MK-L MK/SGM-51-4 APLMK SGM51-4 - - - MK-L MK/SGF-41-4 APLMK SGF41-4 - - - MK-L MK/SGM-21-5 APLMK SGM21-5 - - - AP-K2N Contact Crimping machine Crimp applicator SGM-51(T)-5 SGF-21(T)-5 SGF-51(T)-5 Applicator Dies Crimp applicator with dies MK-L MK/SGM-51-5 APLMK SGM51-5 - - - MK-L MK/SGF-21-5 APLMK SGF21-5 AP-K2N - - - MK-L MK/SGF-51-5 APLMK SGF51-5 - - - * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 521