Inductors for High-frequency Circuits Multilayer/High-SRF MLK series Type: MLK0603 MLK1005 0603[0201 inch]* 1005[0402 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 * All specifications are subject to change without notice. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/7) Inductors for High-frequency Circuits Multilayer/High-SRF Conformity to RoHS Directive MLK Series MLK0603 FEATURES * Inductance values are supported from 1 to 33nH. * With the adoption of a giga-spiral laminated structure, selfresonant frequency higher than that of the MLG structure can be obtained, while the decrease of Q in the GHz band is limited. * Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for high-frequency. * There is no directivity. * The products contain no lead and also support lead-free soldering. * It is a product conforming to RoHS directive. APPLICATIONS For high-frequency applications including mobile phones, high frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB and tuners. SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN PRODUCT IDENTIFICATION MLK 0603 L 10N J T (1) (2) (3) (4) (5) (6) (7) (1) Series name (2) Dimensions Lx W 0603 0.6x0.3mm (LxW) (3) Type name (4) Inductance 2N2 12N 2.2nH 12nH (5) Tolerance S J 0.3nH 5% (6) Packaging style T Taping (reel) 0.60.03 0.3 0.25 (7) TDK internal code 0.3 0.30.03 0.25 SPECIFICATIONS Operating temperature range Storage temperature range 0.150.05 -55 to +125C -55 to +125C(After mount) 0.30.03 PACKAGING STYLE AND QUANTITIES Dimensions in mm Weight: 0.2mg RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260C Natural cooling 230C 180C 150C Preheating 60 to 120s Packaging style Taping Quantity 15000 pieces/reel HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. Soldering 30 to 60s Time(s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-04 / 20111129 / e521_mlk (2/7) ELECTRICAL CHARACTERISTICS Inductance (nH) Inductance tolerance Test frequency L (MHz) Q min. 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 12 15 18 22 27 33 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Self-resonant Test frequency frequency Q (GHz) (MHz) min. typ. 300 12.0 17.1 300 11.0 17.1 300 11.0 16.1 300 10.0 15.8 300 10.0 14.9 300 10.0 14.3 300 10.0 13.8 300 9.0 12.6 300 9.0 12.5 300 8.5 11.4 300 8.5 10.9 300 8.0 10.6 300 8.0 10.5 300 8.0 9.9 300 8.0 9.8 300 7.5 9.5 300 7.5 9.5 300 6.5 8.8 300 6.5 8.5 300 6.0 8.3 300 6.0 8.1 300 6.0 7.7 300 6.0 7.9 300 5.5 7.4 300 5.5 7.5 300 5.0 6.9 300 4.5 6.6 300 4.0 5.8 300 3.5 5.3 300 3.0 4.6 300 2.8 4.4 DC resistance ( ) max. 0.20 0.22 0.22 0.24 0.24 0.27 0.27 0.30 0.30 0.35 0.35 0.40 0.40 0.45 0.45 0.50 0.50 0.60 0.60 0.65 0.65 0.70 0.70 0.80 0.80 1.00 1.10 1.30 1.60 1.70 1.80 Rated current (mA)max. Part No. typ. 0.09 0.10 0.11 0.12 0.12 0.13 0.14 0.15 0.17 0.17 0.18 0.20 0.22 0.22 0.25 0.28 0.28 0.28 0.30 0.34 0.34 0.36 0.41 0.42 0.48 0.54 0.66 0.85 1.02 1.09 1.21 300 300 300 300 300 300 300 300 300 300 300 200 200 200 200 200 200 200 200 200 200 200 200 200 200 150 150 100 100 100 100 MLK0603L1N0ST MLK0603L1N1ST MLK0603L1N2ST MLK0603L1N3ST MLK0603L1N5ST MLK0603L1N6ST MLK0603L1N8ST MLK0603L2N0ST MLK0603L2N2ST MLK0603L2N4ST MLK0603L2N7ST MLK0603L3N0ST MLK0603L3N3ST MLK0603L3N6ST MLK0603L3N9ST MLK0603L4N3ST MLK0603L4N7ST MLK0603L5N1ST MLK0603L5N6ST MLK0603L6N2ST MLK0603L6N8JT MLK0603L7N5JT MLK0603L8N2JT MLK0603L9N1JT MLK0603L10NJT MLK0603L12NJT MLK0603L15NJT MLK0603L18NJT MLK0603L22NJT MLK0603L27NJT MLK0603L33NJT 800MHz 12 11 12 12 12 12 11 12 12 12 13 12 13 11 13 12 13 12 12 12 13 12 13 12 13 12 12 12 12 12 11 1.8GHz 19 17 18 18 18 18 17 17 19 18 19 18 19 17 19 18 19 18 18 18 19 18 19 18 18 18 17 16 16 15 14 * Test equipment Inductance Q : HP4291A+16197A, or equivalent SRF: HP8720C, or equivalent Rdc: YOKOGAWA TYPE7561, or equivalent L, Q vs. FREQUENCY CHARACTERISTICS Part No. MLK0603L1N0ST MLK0603L1N1ST MLK0603L1N2ST MLK0603L1N3ST MLK0603L1N5ST MLK0603L1N6ST MLK0603L1N8ST MLK0603L2N0ST MLK0603L2N2ST MLK0603L2N4ST MLK0603L2N7ST MLK0603L3N0ST MLK0603L3N3ST MLK0603L3N6ST MLK0603L3N9ST MLK0603L4N3ST MLK0603L4N7ST MLK0603L5N1ST MLK0603L5N6ST MLK0603L6N2ST MLK0603L6N8JT MLK0603L7N5JT MLK0603L8N2JT MLK0603L9N1JT MLK0603L10NJT MLK0603L12NJT MLK0603L15NJT MLK0603L18NJT MLK0603L22NJT MLK0603L27NJT MLK0603L33NJT Inductance(nH)typ. 500MHz 800MHz 0.9 0.9 1.0 1.0 1.1 1.0 1.2 1.1 1.3 1.3 1.4 1.4 1.6 1.6 1.8 1.7 2.0 1.9 2.1 2.1 2.4 2.4 2.7 2.6 3.0 2.9 3.2 3.1 3.5 3.4 3.8 3.8 4.2 4.2 4.6 4.5 5.0 5.0 5.5 5.5 6.2 6.1 6.7 6.6 7.4 7.3 8.2 8.1 9.0 8.9 10.8 10.6 13.5 13.4 16.2 16.1 19.8 19.7 24.4 24.4 29.7 29.7 1.8GHz 0.9 0.9 1.0 1.1 1.3 1.4 1.6 1.7 1.9 2.1 2.4 2.6 2.9 3.1 3.5 3.8 4.2 4.5 5.0 5.5 6.2 6.7 7.5 8.3 9.2 11.0 13.9 17.0 20.9 27.2 33.4 2.0GHz 0.9 0.9 1.0 1.1 1.3 1.4 1.6 1.7 1.9 2.1 2.4 2.6 3.0 3.1 3.5 3.8 4.2 4.6 5.0 5.6 6.2 6.8 7.6 8.4 9.3 11.2 14.2 17.4 21.5 28.6 35.1 2.4GHz 0.9 0.9 1.0 1.1 1.3 1.4 1.6 1.7 2.0 2.1 2.4 2.7 3.0 3.2 3.5 3.9 4.3 4.7 5.1 5.7 6.4 7.0 7.8 8.6 9.6 11.6 14.8 18.4 22.8 31.7 39.3 Q typ. 500MHz 10 9 9 9 9 9 9 9 10 9 10 9 10 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 2.0GHz 20 18 19 19 19 19 18 18 20 19 20 19 20 18 20 19 20 19 19 19 20 19 20 18 19 18 18 17 16 15 14 2.4GHz 22 20 21 21 21 21 20 20 22 20 22 21 22 19 22 20 22 21 21 20 22 20 21 20 20 20 19 18 17 14 13 * All specifications are subject to change without notice. 001-04 / 20111129 / e521_mlk (3/7) TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS 30 1000 1.0nH 33nH 20 3.3nH 10nH 10 Q Inductance(nH) 100 10nH 33nH 3.3nH 1 10 1.0nH 0 10 100 1000 Frequency (MHz) 0 10 10000 100 1000 Frequency (MHz) 10000 PACKAGING STYLES REEL DIMENSIONS o60min. 1.0 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. o210.8 o1802.0 Dimensions in mm Cavity 3.50.05 1.5 +0.1 -0.0 0.5max. 0.380.05 4.00.1 2.00.05 160min. Taping 2.00.05 0.680.05 8.00.3 Sprocket hole 1.750.1 TAPE DIMENSIONS 200min. Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-04 / 20111129 / e521_mlk (4/7) Inductors for High-frequency Circuits Multilayer/High-SRF Conformity to RoHS Directive MLK Series MLK1005 FEATURES * Inductance values are supported from 1 to 100nH. * With the adoption of a giga-spiral laminated structure, selfresonant frequency higher than that of the MLG structure can be obtained, while the decrease of Q in the GHz band is limited. * Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for high-frequency. * There is no directivity. * The products contain no lead and also support lead-free soldering. * It is a product conforming to RoHS directive. PRODUCT IDENTIFICATION MLK 1005 S 2N2 S T (1) (2) (3) (4) (5) (6) (7) (1) Series name (2) Dimensions Lx W 1005 1.0x0.5mm (LxW) (3 Type name (4) Inductance APPLICATIONS For high-frequency applications including mobile phones, high frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB and tuners. 2N2 12N R10 2.2nH 12nH 100nH (5) Tolerance SHAPES AND DIMENSIONS S J 0.50.1 10.1 0.3nH 5% (6) Packaging style T Taping (reel) (7) TDK internal code 0.1min. 0.50.1 SPECIFICATIONS Weight: 1.0mg RECOMMENDED PC BOARD PATTERN 0.4 Dimensions in mm RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260C Natural cooling 230C -55 to +125C -55 to +125C(After mount) PACKAGING STYLE AND QUANTITIES Packaging style Taping 0.5 0.5 0.5 Operating temperature range Storage temperature range Quantity 10000 pieces/reel HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. 180C 150C Preheating 60 to 120s Soldering 30 to 60s Time(s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-04 / 20111129 / e521_mlk (5/7) ELECTRICAL CHARACTERISTICS Inductance (nH) Inductance tolerance Q min. Test frequency L, Q (MHz) 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 12 15 18 22 27 33 39 47 56 68 82 100 110 120 130 150 160 180 200 220 240 270 300 330 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5 5 5 5 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self-resonant frequency (GHz) min. typ. 12.0 16.9 11.5 14.8 11.0 14.4 10.0 12.6 9.5 12.2 9.0 11.9 8.5 10.9 8.3 10.0 8.0 9.6 7.8 9.5 7.5 9.1 7.2 8.5 7.0 8.3 6.8 8.1 6.5 7.8 6.3 7.4 6.0 6.9 5.8 7.0 5.7 6.7 5.6 6.5 5.5 6.3 5.0 6.0 5.0 6.0 4.8 5.9 4.7 5.2 4.3 5.3 4.0 4.8 4.0 4.7 3.5 4.4 3.0 3.9 2.5 3.5 2.0 3.1 1.8 3.0 1.5 2.6 1.4 2.4 1.3 2.2 1.1 1.9 1.1 2.0 1.1 1.9 1.1 1.8 1.1 1.7 1.1 1.7 1.1 1.6 1.1 1.5 1.0 1.4 1.0 1.3 0.9 1.2 0.9 1.2 0.85 1.1 DC resistance ( ) max. 0.10 0.12 0.12 0.15 0.15 0.17 0.17 0.18 0.18 0.20 0.20 0.22 0.22 0.25 0.25 0.28 0.28 0.30 0.30 0.35 0.35 0.38 0.38 0.42 0.42 0.47 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.30 1.50 1.80 2.20 2.70 3.00 3.30 5.00 5.20 6.00 6.20 6.20 6.50 6.50 7.50 8.00 typ. 0.05 0.05 0.05 0.06 0.06 0.06 0.07 0.08 0.08 0.09 0.10 0.10 0.11 0.11 0.12 0.13 0.13 0.15 0.15 0.18 0.18 0.20 0.21 0.23 0.23 0.27 0.33 0.38 0.46 0.53 0.59 0.65 0.74 0.84 1.01 1.39 1.60 1.89 2.08 2.28 3.58 3.79 4.28 4.56 4.54 4.84 4.78 5.37 5.82 Rated current (mA)max. Part No. 500 500 500 500 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 400 350 350 350 350 350 300 250 200 200 200 200 200 200 150 150 100 100 100 100 80 80 80 70 70 70 70 70 70 MLK1005S1N0T MLK1005S1N1T MLK1005S1N2T MLK1005S1N3T MLK1005S1N5T MLK1005S1N6T MLK1005S1N8T MLK1005S2N0T MLK1005S2N2T MLK1005S2N4T MLK1005S2N7T MLK1005S3N0T MLK1005S3N3T MLK1005S3N6T MLK1005S3N9T MLK1005S4N3T MLK1005S4N7T MLK1005S5N1T MLK1005S5N6T MLK1005S6N2T MLK1005S6N8T MLK1005S7N5T MLK1005S8N2T MLK1005S9N1T MLK1005S10NT MLK1005S12NT MLK1005S15NT MLK1005S18NT MLK1005S22NT MLK1005S27NT MLK1005S33NT MLK1005S39NT MLK1005S47NT MLK1005S56NT MLK1005S68NT MLK1005S82NT MLK1005SR10T MLK1005SR11T MLK1005SR12T MLK1005SR13T MLK1005SR15T MLK1005SR16T MLK1005SR18T MLK1005SR20T MLK1005SR22T MLK1005SR24T MLK1005SR27T MLK1005SR30T MLK1005SR33T : Please specify inductance tolerance, S (0.3nH) or J (5%). * Test equipment Inductance Q : HP4291A+16193A, or equivalent SRF: HP8720C, or equivalent Rdc: YOKOGAWA TYPE7561, or equivalent * All specifications are subject to change without notice. 001-04 / 20111129 / e521_mlk (6/7) L, Q vs. FREQUENCY CHARACTERISTICS Part No. MLK1005S1N0 MLK1005S1N1 MLK1005S1N2 MLK1005S1N3 MLK1005S1N5 MLK1005S1N6 MLK1005S1N8 MLK1005S2N0 MLK1005S2N2 MLK1005S2N4 MLK1005S2N7 MLK1005S3N0 MLK1005S3N3 MLK1005S3N6 MLK1005S3N9 MLK1005S4N3 MLK1005S4N7 MLK1005S5N1 MLK1005S5N6 MLK1005S6N2 MLK1005S6N8 MLK1005S7N5 MLK1005S8N2 MLK1005S9N1 MLK1005S10N MLK1005S12N MLK1005S15N MLK1005S18N MLK1005S22N MLK1005S27N MLK1005S33N MLK1005S39N MLK1005S47N MLK1005S56N MLK1005S68N MLK1005S82N MLK1005SR10 MLK1005SR11 MLK1005SR12 MLK1005SR13 MLK1005SR15 MLK1005SR16 MLK1005SR18 MLK1005SR20 MLK1005SR22 MLK1005SR24 MLK1005SR27 MLK1005SR30 MLK1005SR33 Inductance(nH)typ. 500MHz 800MHz 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.4 1.4 1.5 1.5 1.7 1.7 1.9 1.8 2.0 2.0 2.2 2.2 2.5 2.5 2.8 2.8 3.1 3.1 3.4 3.3 3.7 3.6 4.0 4.0 4.4 4.4 4.8 4.8 5.3 5.2 5.8 5.8 6.4 6.4 7.1 7.0 7.7 7.7 8.6 8.6 9.4 9.4 11.3 11.3 14.2 14.2 17.0 17.1 20.8 20.9 25.6 25.9 31.4 31.9 37.2 38.1 45.0 46.2 53.7 55.4 65.5 68.4 79.3 83.6 97.1 103.2 107.8 115.9 118.0 127.8 127.5 139.5 149.4 166.0 160.5 179.4 181.1 204.1 202.8 231.9 225.7 266.8 248.3 299.6 290.0 386.0 323.1 432.6 358.9 493.1 1.8GHz 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.0 2.2 2.5 2.8 3.1 3.4 3.7 4.1 4.5 4.9 5.4 6.0 6.6 7.4 8.1 9.1 10.0 12.1 15.3 18.6 23.0 29.8 37.6 48.9 60.6 76.7 105.6 142.7 199.4 2.0GHz 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.0 2.3 2.6 2.9 3.1 3.5 3.7 4.2 4.6 5.0 5.5 6.2 6.7 7.6 8.3 9.3 10.2 12.4 15.8 19.2 23.9 31.5 40.2 2.4GHz 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.6 2.9 3.2 3.5 3.8 4.3 4.7 5.1 5.7 6.4 7.0 7.9 8.6 9.7 10.7 13.0 16.8 20.6 25.8 35.7 Q typ. 500MHz 16 16 15 17 15 17 16 16 15 16 17 18 16 17 17 17 17 17 17 18 17 18 19 18 19 19 18 18 18 18 18 17 18 17 17 16 15 16 16 14 16 16 16 15 15 14 14 14 13 800MHz 20 20 18 20 19 21 21 20 19 20 22 22 20 22 21 22 22 22 22 23 22 23 23 23 23 23 23 23 23 23 23 21 21 21 20 19 18 18 18 16 17 18 17 17 15 15 12 12 12 1.8GHz 30 32 28 33 29 34 32 32 29 32 33 35 31 33 32 34 33 33 33 34 32 34 34 34 34 34 33 32 32 30 29 24 24 22 18 15 13 2.0GHz 32 35 30 35 31 36 33 34 31 34 35 36 32 35 33 35 35 35 34 35 33 36 36 36 35 35 34 33 33 30 29 2.4GHz 36 39 33 39 34 40 37 38 34 38 39 41 36 39 37 39 38 38 38 39 36 38 38 38 38 37 35 34 34 28 * All specifications are subject to change without notice. 001-04 / 20111129 / e521_mlk (7/7) TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS 50 1000 1.0nH 10nH 3.3nH 33nH 33nH 30 10nH 10 Q Inductance (nH) 40 100nH 100 3.3nH 20 1.0nH 1 10 100nH 0 10 100 1000 0 10 10000 Frequency(MHz) 100 1000 Frequency(MHz) 10000 PACKAGING STYLES REEL DIMENSIONS o60min. 1.0 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. o210.8 o1802.0 Dimensions in mm Cavity 3.50.05 1.5 +0.1 -0.0 0.8max. 0.670.1 4.00.1 2.00.05 160min. Taping 2.00.05 1.150.1 8.00.3 Sprocket hole 1.750.1 TAPE DIMENSIONS 200min. Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-04 / 20111129 / e521_mlk