TAZB224J050CRLB0027 - AVX Corporation

The TAZ part has fully molded, compliant

leadframe construction designed for

use in applications utilizing solder

(Reflow, Wave or Vapor Phase),

conductive adhesive or thermal com-

pression bonding techniques. Each

chip is marked with polarity, capaci-

tance code and rated voltage.

The series comprises eight case sizes

(see dimensional chart below) with the

new V case enabling capacitance

values to 470 µF. The C case, with its

non-standard aspect ratio, is retained

as a QPL (Qualified Product List)

only special.

MARKING

(White marking on black body)

Case sizes A through E share a common (0.050" nom) height profile, compatible with PCMCIA type II applications. These

allow downsizing in all portable applications, ranging from sub-miniature hard-disc drive (HDD)/computer to portable

communications/GPS systems. The F case at 0.070" nom offers the versatility of a low profile design, while allowing

capacitance ratings to 100 µF for low voltage filtering applications.

Cases G and H offer lower profile and greater volumetric efficiency than their nearest EIA sized counterparts

(ref. CWR11). These are especially suited to power supply applications. The regular configuration allows for banking

(brickwalling) applications where maximum capacitance with minimal ESR and inductance are required in a limited

board space.

Polarity Stripe (+)

Capacitance Code

Rated Voltage

TAZ Series

Including CWR09 and COTS-Plus

TAZ & CWR09 CASE DIMENSIONS: millimeters (inches)

Case Length (L) Width (W) Height (H) Term. Width (W1)Term. Length (A) S min

Code ±0.38 (0.015) ±0.38 (0.015) ±0.38 (0.015) ±0.13 (0.005)

A2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 0.76 (0.030) 0.38 (0.015)

(0.050±0.005)

B3.81 (0.150) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 0.76 (0.030) 1.65 (0.065)

(0.050±0.005)

D3.81 (0.150) 2.54 (0.100) 1.27 (0.050) 2.41+0.13/-0.25 0.76 (0.030) 1.65 (0.065)

(0.095+0.005/-0.010)

E5.08 (0.200) 2.54 (0.100) 1.27 (0.050) 2.41+0.13/-0.25 0.76 (0.030) 2.92 (0.115)

(0.095+0.005/-0.010)

F5.59 (0.220) 3.43 (0.135) 1.78 (0.070) 3.30±0.13 0.76 (0.030) 3.43 (0.135)

(0.130±0.005)

G6.73 (0.265) 2.79 (0.110) 2.79 (0.110) 2.67±0.13 1.27 (0.050) 3.56 (0.140)

(0.105±0.005)

H7.24 (0.285) 3.81 (0.150) 2.79 (0.110) 3.68+0.13/-0.51 1.27 (0.050) 4.06 (0.160)

(0.145+0.005/-0.020)

V7.30±0.30 6.10±0.200 3.45±0.30 3.10 (0.120) 1.40+0.30/-0.20 4.40 (0.173)

(0.287±0.012) (0.240±0.008) (0.136±0.012) (0.550+0.012/-0.008)

TAZ Series

Including CWR09 and COTS-Plus

CWR09 J B 225 K B A \TR

Technical Data: Unless otherwise specified, all technical data relate to an ambient temperature of 25°C

Capacitance Range: 0.1 to 470 µF

Capacitance Tolerance: ±20%, ±10%, ±5%

Rated DC Voltage: (VR)85°C: 4 6 10 15 20 25 35 50

Category Voltage: (VC)125°C: 2.7 4 7 10 13 17 23 33

Surge Voltage: (VC)85°C: 5.2 8 13 20 26 33 46 65

125°C: 3.5 5 9 12 16 21 28 40

Operating Temperature Range: -55°C to +125°C

Fully qualified to MIL-PRF-55365/4, this series represents

the most flexible of surface mount form factors, offering eight

case sizes (A through H). This series is fully interchangeable

with CWR06 conformal types, while offering the advantages

of molded body/compliant termination construction, polarity,

capacitance and JAN brand packaging. The molded con-

struction is compatible with a wide range of SMT board

assembly processes including wave or reflow solder, con-

ductive epoxy or compression bonding techniques. The five

smaller cases are characterized by their low profile construc-

tion, with the A case being the world’s smallest molded mil-

itary tantalum. There are three termination finishes available:

fused solder plated (“K” per MIL-PRF-55365), hot solder

dipped (“C”) and gold plated (“B”). In addition, the molding

compound has been selected to meet the requirements

of UL94V-0 and outgassing requirements of NASA SP-R-

0022A.

CWR09 - MIL-PRF-55365/4

PART NUMBERING SYSTEM

TAZ COTS-Plus SERIES

Style Voltage

Code

Termination

Finish

Capacitance

Code Packaging

(see page 92)

Surge Test

Option

Reliability

Grade

Capacitance

Tolerance

TAZH 227 M 006 C R SB 08 00

PART NUMBERING SYSTEM

CWR19/CWR29-MIL-PRF-55365/11

Style Case

Size

Capacitance

Code

Capacitance

Tolerance

Voltage

Code

Surge Test

Option

Termination

Finish

Qualification/

Reliability

Packaging

(see page 92)

Standard

or Low

ESR Range

This series features:

•

CWR09 form factor in Standard and Extended ratings.

•Low Profile molded design (Cases A through E).

•Low ESR Ratings (Cases G through V).

•Extended Case size (V) for ratings to 470 µF.

•Weibull Reliability Grading and Surge Test options.

All ratings in this series offer the advantages of molded

body/compliant termination construction, polarity, capaci-

tance and voltage marking. The molded construction is

compatible with a wide range of SMT board assembly

processes including wave or reflow solder, conductive epoxy

or compression bonding techniques.

As the CWRxx part numbering system does not include a

case size reference, many available ratings are not included

in the current QPL Matrix. These ratings are being added as

CWR19 (Standard) and CWR29 (Low ESR) Series. These are

currently under qualification to MIL-PRF-55365 but are

available as Established Reliability Product and may be

ordered by their TAZ part number reference.

When released, CWR19 and CWR29 part numbers will contain

a case size reference.

For more details on qualification status, contact AVX.

DC Leakage (max) Dissipation Factor (max)

QPL Part Number DC rated Cap ESR (max) Case

AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size

(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C

(volts) (Ohms)

TAZA225*004C#@0^++ CWR09C^225*@+42.2 1.0 10 12 6 8 8 8.0 A

TAZA475*004C#@0^++ CWR19C^475*@+44.7 1.0 10 12 6 8 8 12.0 A

TAZB475*004C#@0^++ CWR09C^475*@+44.7 1.0 10 12 6 8 8 8.0 B

TAZA685*004C#@0^++ CWR19C^685*@+46.8 0.272 2.72 3.264 6 8 8 12 A

TAZB106*004C#@0^++ CWR19C^106*@+410.0 1.0 10 12 8 10 10 8.0 B

TAZD106*004C#@0^++ CWR09C^106*@+410.0 1.0 10 12 8 8 10 4.0 D

TAZB156*004C#@0^++ CWR19C^156*@+4150.6 6 7.2 6 8 8 8 B

TAZE156*004C#@0^++ CWR09C^156*@+415.0 1.0 10 12 8 10 12 3.5 E

TAZB226*004C#@0^++ 4220.88 8.8 10.56 6 8 8 10 B

TAZD226*004C#@0^++ CWR19C^226*@+422.0 1.0 10 12 8 10 12 4.0 D

TAZD336*004C#@0^++ CWR19C^336*@+4331.32 13.2 15.84 8 10 12 4 D

TAZE336*004C#@0^++ CWR19C^336*@+433.0 2.0 20 24 8 10 12 3.0 E

TAZF336*004C#@0^++ CWR09C^336*@+433.0 2.0 20 24 8 10 12 2.2 F

TAZE476*004C#@0^++ CWR19C^476*@+4471.88 18.8 22.56 8 10 12 3 E

TAZE686*004C#@0^++ CWR19C^686*@+4682.72 27.2 32.64 8 10 12 3 E

TAZG686*004C#@0^++ CWR09C^686*@+468.0 3.0 30 36 10 12 12 1.1 G

TAZF107*004C#@0^++ CWR19C^107*@+4100.0 4.0 40 48 10 12 12 2.0 F

TAZH107*004C#@0^++ CWR09C^107*@+4100.0 4.0 40 48 10 12 12 0.9 H

TAZG157*004C#@0^++ 4150.0 6.0 60 72 10 12 12 1.0 G

TAZG227*004C#@0^++ CWR19C^227*@+4220 8.8 88 105.6 10 12 12 — G

TAZH337*004C#@0^++ CWR19C^337*@+4330 13.2 132 158.4 10 12 12 — H

TAZA155*006C#@0^++ CWR09D^155*@+61.5 1.0 10 12 6 8 8 8.0 A

TAZA335*006C#@0^++ CWR19C^335*@+63.3 1.0 10 12 6 8 8 12.0 A

TAZB335*006C#@0^++ CWR09D^335*@+63.3 1.0 10 12 6 8 8 8.0 B

TAZA475*006C#@0^++ CWR19C^475*@+64.7 0.282 2.82 3.384 6 8 8 12 A

TAZB685*006C#@0^++ CWR19C^685*@+66.8 1.0 10 12 6 8 8 8.0 B

TAZD685*006C#@0^++ CWR09D^685*@+66.8 1.0 10 12 6 8 8 4.5 D

TAZB106*006C#@0^++ CWR19C^106*@+6100.6 6 7.2 6 8 8 8 B

TAZE106*006C#@0^++ CWR09D^106*@+610.0 1.0 10 12 8 10 12 3.5 E

TAZB156*006C#@0^++ CWR19D^156*@+6150.9 9 10.8 6 8 8 12 B

TAZD156*006C#@0^++ CWR19D^156*@+615.0 1.0 10 12 8 10 12 5.0 D

TAZD226*006C#@0^++ CWR19D^226*@+6221.32 13.2 15.84 6 8 8 5 D

TAZE226*006C#@0^++ CWR19D^226*@+622.0 2.0 20 24 8 10 12 3.5 E

TAZF226*006C#@0^++ CWR09D^226*@+622.0 2.0 20 24 8 10 12 2.2 F

TAZE336*006C#@0^++ CWR19D^336*@+6331.98 19.8 23.76 6 8 8 3.5 E

TAZG476*006C#@0^++ CWR09D^476*@+647.0 3.0 30 36 10 12 12 1.1 G

TAZF686*006C#@0^++ CWR19D^686*@+668.0 4.0 40 48 10 12 12 1.5 F

TAZH686*006C#@0^++ CWR09D^686*@+668.0 4.0 40 48 10 12 12 0.9 H

TAZG107*006C#@0^++ CWR19D^107*@+6100.0 6.0 60 72 10 12 12 1.1 G

TAZG107*006L#@0^++ CWR29C^107*@+6100.0 6.0 60 72 10 12 12 0.150 G

TAZG157*006C#@0^++ CWR19C^157*@+6150 9 90 108 10 12 12 1.1 G

TAZH227*006C#@0^++ CWR19C^227*@+6220.0 10.0 100 120 10 12 12 0.9 H

TAZH227*006L#@0^++ CWR29C^227*@+6220.0 10.0 100 120 10 12 12 0.100 H

TAZH337*006C#@0^++ CWR19C^337*@+6330 19.8 198 237.6 10 12 12 1 H

Part Number Designations

^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:

= Packaging:

For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:

9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk

8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R

0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R

For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:

B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard

C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R

K = Solder Fused B = 10 cycles, \TR13 = 13" T&R

-55°C & +85°C \W = Waffle

Following the voltage code, C designates Standard, L designates Low ESR Ratings

CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER

Surface Mount Military

CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus

DC Leakage (max) Dissipation Factor (max)

QPL Part Number DC rated Cap ESR (max) Case

AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size

(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C

(volts) (Ohms)

TAZA105*010C#@0^++ CWR09F^105*@+10 1.0 1.0 10 12 6 8 8 10.0 A

TAZA225*010C#@0^++ CWR19F^225*@+10 2.2 1.0 10 12 6 8 8 12.0 A

TAZB225*010C#@0^++ CWR09F^225*@+10 2.2 1.0 10 12 6 8 8 8.0 B

TAZA335*010C#@0^++ CWR19F^335*@+10 3.3 0.33 3.3 3.96 6 8 8 12 A

TAZB475*010C#@0^++ CWR19F^475*@+10 4.7 1.0 10 12 6 8 8 8.0 B

TAZD475*010C#@0^++ CWR09F^475*@+10 4.7 1.0 10 12 6 8 8 4.5 D

TAZB685*010C#@0^++ CWR19F^685*@+10 6.8 0.68 6.8 8.16 6 8 8 8 B

TAZD685*010C#@0^++ CWR19F^685*@+10 6.8 1.0 10 12 6 8 8 5.0 D

TAZE685*010C#@0^++ CWR09F^685*@+10 6.8 1.0 10 12 6 8 8 3.5 E

TAZB106*010C#@0^++ CWR19F^106*@+10 10 1 12 12 6 8 8 12 B

TAZD106*010C#@0^++ CWR19F^106*@+10 10.0 1.0 10 12 6 8 8 4.0 D

TAZD156*010C#@0^++ CWR19F^156*@+10 15 1.5 15 18 6 8 8 5 D

TAZE156*010C#@0^++ CWR19F^156*@+10 15.0 2.0 20 24 8 10 10 3.0 E

TAZF156*010C#@0^++ CWR09F^156*@+10 15.0 2.0 20 24 8 8 10 2.5 F

TAZD226*010C#@0^++ 10 22 2.2 22 26.4 6 8 8 4 D

TAZE226*010C#@0^++ CWR19F^226*@+10 22.0 3.0 30 36 8 10 10 2.0 E

TAZF336*010C#@0^++ CWR19F^336*@+10 33 3.3 33 39.6 8 10 12 1.5 F

TAZG336*010C#@0^++ CWR09F^336*@+10 33.0 3.0 30 36 10 12 12 1.1 G

TAZF476*010C#@0^++ CWR19F^476*@+10 47.0 4.0 40 48 10 12 12 1.5 F

TAZH476*010C#@0^++ CWR09F^476*@+10 47.0 5.0 50 60 10 12 12 0.9 H

TAZG686*010C#@0^++ CWR19F^686*@+10 68.0 6.0 60 72 10 12 12 1.1 G

TAZG686*010L#@0^++ CWR29F^686*@+10 68.0 6.0 60 72 10 12 12 0.200 G

TAZG107*010C#@0^++ CWR19F^107*@+10 100 10 100 120 10 12 12 1.1 G

TAZH107*010C#@0^++ CWR19F^107*@+10 100.0 10.0 100 120 10 12 12 0.9 H

TAZH107*010L#@0^++ CWR29F^107*@+10 100.0 10.0 100 120 10 12 12 0.100 H

TAZH157*010C#@0^++ CWR19F^157*@+10 150.0 15.0 150 180 10 12 12 0.9 H

TAZH157*010L#@0^++ CWR29F^157*@+10 150.0 15.0 150 180 10 12 12 0.100 H

TAZH227*010C#@0^++ CWR19F^227*@+10 220 22 220 264 10 12 12 1 H

TAZV337*010L#@0^++ 10 330 33 330 660 8 10 12 0.1 V

TAZV477(*)010L#@00++ 10 470.0 47.0 470 940 10 12 14 0.100 V

Surface Mount Military

CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus

Part Number Designations

^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:

= Packaging:

For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:

9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk

8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R

0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R

For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:

B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard

C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R

K = Solder Fused B = 10 cycles, \TR13 = 13" T&R

-55°C & +85°C \W = Waffle

Following the voltage code, C designates Standard, L designates Low ESR Ratings

CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER

DC Leakage (max) Dissipation Factor (max)

QPL Part Number DC rated Cap ESR (max) Case

AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size

(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C

(volts) (Ohms)

TAZA684*015C#@0^++ CWR09H^684*@+15 0.68 1.0 10 12 6 8 8 12.0 A

TAZA105*015C#@0^++ CWR19H^105*@+15 1.0 1.0 10 12 6 8 8 15.0 A

TAZA155*015C#@0^++ CWR19H^155*@+15 1.5 0.225 2.25 2.7 6 8 8 15 A

TAZB155*015C#@0^++ CWR09H^155*@+15 1.5 1.0 10 12 6 8 8 8.0 B

TAZA225*015C#@0^++ CWR19H^225*@+15 2.2 0.33 3.3 3.96 6 8 9 15 A

TAZB335*015C#@0^++ CWR19H^335*@+15 3.3 1.0 10 12 6 8 8 9.0 B

TAZD335*015C#@0^++ CWR09H^335*@+15 3.3 1.0 10 12 6 8 8 5.0 D

TAZB475*015C#@0^++ CWR19H^475*@+15 4.7 0.705 7.05 8.46 6 8 8 5 B

TAZD475*015C#@0^++ CWR19H^475*@+15 4.7 1.0 10 12 6 8 8 6.0 D

TAZE475*015C#@0^++ CWR09H^475*@+15 4.7 1.0 10 12 6 8 8 4.0 E

TAZD685*015C#@0^++ CWR19H^685*@+15 6.8 1.02 10.2 12.24 6 8 8 6 D

TAZD106*015C#@0^++ CWR19H^106*@+15 10 1.5 15 18 6 8 8 6 D

TAZE106*015C#@0^++ CWR19H^106*@+15 10.0 2.0 20 24 6 8 8 4.0 E

TAZF106*015C#@0^++ CWR09H^106*@+15 10.0 2.0 20 24 6 8 8 2.5 F

TAZE156*015C#@0^++ CWR19H^156*@+15 15 2.25 22.5 27 6 8 8 4 E

TAZF226*015C#@0^++ CWR19H^226*@+15 22.0 3.0 30 36 8 10 10 3.0 F

TAZG226*015C#@0^++ CWR09H^226*@+15 22.0 4.0 40 48 6 8 8 1.1 G

TAZF336*015C#@0^++ CWR19H^336*@+15 33 4.95 49.5 59.4 6 8 8 3 F

TAZH336*015C#@0^++ CWR09H^336*@+15 33.0 5.0 50 60 8 8 10 0.9 H

TAZG476*015C#@0^++ CWR19H^476*@+15 47 7.05 70.5 84.6 8 10 12 1.1 G

TAZG476*015C#@0^++ CWR19H^476*@+15 68 10.2 102 122.4 8 10 12 1.1 G

TAZH686*015C#@0^++ CWR19H^686*@+15 68.0 10.0 100 120 8 10 12 0.9 H

TAZH686*015L#@0^++ CWR29H^686*@+15 68.0 10.0 100 120 8 10 12 0.150 H

TAZH107*015C#@0^++ CWR19H^107*@+15 100.0 15.0 150 180 10 12 12 0.9 H

TAZH107*015L#@0^++ CWR29H^107*@+15 100.0 15.0 150 180 10 12 12 0.125 H

TAZV227(*)016L#@00++ 16 220.0 35.2 352 704 8 10 12 0.150 V

TAZA474*020C#@0^++ CWR09J^474*@+20 0.47 1.0 10 12 6 8 8 14.0 A

TAZA684*020C#@0^++ CWR19J^684*@+20 0.68 1.0 10 12 6 8 8 15.0 A

TAZB684*020C#@0^++ CWR09J^684*@+20 0.68 1.0 10 12 6 8 8 10.0 B

TAZA105*020C#@0^++ CWR19J^105*@+20 1.0 0.2 2.0 2.4 6 8 8 15 A

TAZB105*020C#@0^++ CWR09J^105*@+20 1.0 1.0 10 12 6 8 8 12.0 B

TAZB155*020C#@0^++ CWR19J^155*@+20 1.5 0.3 3.0 3.6 6 8 8 9.0 B

TAZB225*020C#@0^++ CWR19J^225*@+20 2.2 1.0 10 12 6 8 8 9.0 B

TAZD225*020C#@0^++ CWR09J^225*@+20 2.2 1.0 10 12 6 8 8 5.0 D

TAZD335*020C#@0^++ CWR19J^335*@+20 3.3 1.0 10 12 6 8 8 6.0 D

TAZE335*020C#@0^++ CWR09J^335*@+20 3.3 1.0 10 12 6 8 8 4.0 E

TAZE475*020C#@0^++ CWR19J^475*@+20 4.7 1.0 10 12 6 8 8 6.0 E

TAZE685*020C#@0^++ CWR19J^685*@+20 6.8 2.0 20 24 6 8 8 5.0 E

TAZF685*020C#@0^++ CWR09J^685*@+20 6.8 2.0 20 24 6 8 8 2.4 F

TAZF106*020C#@0^++ CWR19J^106*@+20 10.0 2.0 20 24 6 8 8 3.0 F

TAZF156*020C#@0^++ CWR19J^156*@+20 15.0 3.0 30 36 6 8 8 3.0 F

TAZG156*020C#@0^++ CWR09J^156*@+20 15.0 3.0 30 36 6 8 8 1.1 G

TAZG226*020C#@0^++ CWR19J^226*@+20 22.0 4.0 40 48 6 8 8 2.5 G

TAZG226*020L#@0^++ CWR29J^226*@+20 22.0 4.0 40 48 6 8 8 0.500 G

TAZH226*020C#@0^++ CWR09J^226*@+20 22.0 4.0 40 48 6 8 8 0.9 H

TAZH336*020C#@0^++ CWR19J^336*@+20 33.0 6.6 66 79.2 8 10 12 0.9 H

TAZH476*020C#@0^++ CWR19J^476*@+20 47.0 10.0 100 120 8 10 10 0.9 H

TAZH476*020L#@0^++ CWR29J^476*@+20 47.0 10.0 100 120 8 10 10 0.250 H

TAZV107(*)020L#@00++ 20 100.0 20.0 200 400 8 10 12 0.200 V

Surface Mount Military

CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus

Part Number Designations

^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:

= Packaging:

For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:

9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk

8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R

0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R

For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:

B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard

C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R

K = Solder Fused B = 10 cycles, \TR13 = 13" T&R

-55°C & +85°C \W = Waffle

Following the voltage code, C designates Standard, L designates Low ESR Ratings

CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER

Surface Mount Military

CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus

DC Leakage (max) Dissipation Factor (max)

QPL Part Number DC rated Cap ESR (max) Case

AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size

(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C

(volts) (Ohms)

TAZA334*025C#@0^++ CWR09K^334*@+25 0.33 1.0 10 12 6 8 8 15.0 A

TAZA474*025C#@0^++ CWR19K^474*@+25 0.47 0.1175 1.175 1.41 6 8 8 15 A

TAZB684*025C#@0^++ CWR09K^684*@+25 0.68 1.0 10 12 6 8 8 7.5 B

TAZB105*025C#@0^++ CWR19K^105*@+25 1.0 1.0 10 12 6 8 8 10.0 B

TAZD155*025C#@0^++ CWR09K^155*@+25 1.5 1.0 10 12 6 8 8 6.5 D

TAZD225*025C#@0^++ CWR19K^225*@+25 2.2 1.0 10 12 6 8 8 6.0 D

TAZE225*025C#@0^++ CWR09K^225*@+25 2.2 1.0 10 12 6 8 8 3.5 E

TAZE335*025C#@0^++ CWR19K^335*@+25 3.3 1.0 10 12 6 8 8 4.0 E

TAZF475*025C#@0^++ CWR09K^475*@+25 4.7 2.0 20 24 6 8 8 2.5 F

TAZF685*025C#@0^++ CWR19K^685*@+25 6.8 2.0 20 24 6 8 8 3.0 F

TAZG685*025C#@0^++ CWR09K^685*@+25 6.8 2.0 20 24 6 8 8 1.2 G

TAZG106*025C#@0^++ CWR09K^106*@+25 10.0 3.0 30 36 6 8 8 1.4 G

TAZG156*025C#@0^++ CWR19K^156*@+25 15 3.75 37.5 45 6 8 8 1.4 G

TAZH156*025C#@0^++ CWR09K^156*@+25 15.0 4.0 40 48 6 8 8 1.0 H

TAZG226*025C#@0^++ CWR19K^226*@+25 22 5.5 55 66 6 8 8 1.4 G

TAZH226*025C#@0^++ CWR19K^226*@+25 22.0 6.0 60 72 6 8 8 0.9 H

TAZH226*025L#@0^++ CWR29K^226*@+25 22.0 6.0 60 72 6 8 8 0.200 H

TAZH336*025C#@0^++ CWR19K^336*@+25 33 8.25 82.5 99 8 10 12 0.9 H

TAZV686(*)025L#@00++ 25 68.0 17.0 170 340 8 10 12 0.150 V

TAZA224*035C#@0^++ CWR09M^224*@+35 0.22 1.0 10 12 6 8 8 18.0 A

TAZA334*035C#@0^++ CWR19M^334*@+35 0.33 0.1155 1.155 1.386 6 8 8 22 A

TAZB474*035C#@0^++ CWR09M^474*@+35 0.47 1.0 10 12 6 8 8 10.0 B

TAZD105*035C#@0^++ CWR09M^105*@+35 1.0 1.0 10 12 6 8 8 6.5 D

TAZE155*035C#@0^++ CWR09M^155*@+35 1.5 1.0 10 12 6 8 8 4.5 E

TAZF335*035C#@0^++ CWR09M^335*@+35 3.3 1.0 10 12 6 8 8 2.5 F

TAZG475*035C#@0^++ CWR09M^475*@+35 4.7 2.0 20 24 6 8 8 1.5 G

TAZH685*035C#@0^++ CWR09M^685*@+35 6.8 3.0 30 36 6 8 8 1.3 H

TAZH106*035C#@0^++ CWR19M^106*@+35 10.0 4.0 40 48 8 10 10 0.9 H

TAZH106*035L#@0^++ CWR29M^106*@+35 10.0 4.0 40 48 8 10 10 0.300 H

TAZG686*035C#@0^++ 35 6.8 2.38 23.8 28.56 6 8 8 1.5 G

TAZA104*050C#@0^++ CWR09N^104*@+50 0.10 1.0 10 12 6 8 8 22.0 A

TAZA154*050C#@0^++ CWR09N^154*@+50 0.15 1.0 10 12 6 8 8 17.0 A

TAZB224*050C#@0^++ CWR09N^224*@+50 0.22 1.0 10 12 6 8 8 14.0 B

TAZB334*050C#@0^++ CWR09N^334*@+50 0.33 1.0 10 12 6 8 8 12.0 B

TAZD684*050C#@0^++ CWR09N^684*@+50 0.68 1.0 10 12 6 8 8 7.0 D

TAZE105*050C#@0^++ CWR09N^105*@+50 1.0 1.0 10 12 6 8 8 6.0 E

TAZF155*050C#@0^++ CWR09N^155*@+50 1.5 1.0 10 12 6 8 8 4.0 F

TAZF225*050C#@0^++ CWR09N^225*@+50 2.2 2.0 20 24 6 8 8 2.5 F

TAZG335*050C#@0^++ CWR09N^335*@+50 3.3 2.0 20 24 6 8 8 2.0 G

TAZH475*050C#@0^++ CWR09N^475*@+50 4.7 3.0 30 36 6 8 8 1.5 H

Part Number Designations

^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:

= Packaging:

For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:

9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk

8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R

0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R

For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:

B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard

C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R

K = Solder Fused B = 10 cycles, \TR13 = 13" T&R

-55°C & +85°C \W = Waffle

Following the voltage code, C designates Standard, L designates Low ESR Ratings

CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER