N7E50-D516VY-30 - 3M - Datasheet.Directory

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ CF Card Header

CompactFlash Type I, Low Profile, Surface Mount 7E50 Series

Physical

Electrical

Environmental

CompactFlash is a registered trademark of the SanDisk Corporation.

Insulation

Material: Liquid Crystal Polymer (LCP)

Flammability: UL 94V-0

Color: Beige

Contact

Material: Copper Alloy

Plating

Underplating: 100 µ″ [ 2.54 µm ] Nickel

Wiping Area: Gold Flash over 80/20 Palladium Nickel, Lubricated (see Ordering Information)

Solder Tails: Gold Flash (see Ordering Information)

Marking 3M Logo, Part Number, Date Code

Current Rating: .5 A

Insulation Resistance: >1 × 109 Ω at 500 VDC

>1 × 108 Ω at 500 VDC after Environmental Conditioning

Withstanding Voltage: 500 VRMS at Sea Level

Temperature Rating: -55°C to +85°C

Process Rating: Maximum 260°C (per J-STD-020C)

TS-0747-C

Sheet 1 of 3

• Meets CFA standards

• 4.0 mm low profile height

• Single row solder tails with 0.635 mm spacing

• Ejector option for easy removal of CF Card

• See Regulatory Information Appendix (RIA)

for chemical compliance information

Date Modified: September 19, 2007

UL File No.: E68080

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ CF Card Header

CompactFlash Type I, Low Profile, Surface Mount 7E50 Series

Pin Type Interface Dim A Pin No.

detect 3.50 [ .138 ] 25, 26

general 4.25 [ .167 ] all other pins

power 5.00 [ .197 ] 1, 13, 38 & 50

TS-0747-C

Sheet 2 of 3

[Inch]

Tolerance Unless Noted

[ ] Dimensions for

Reference only

± .3

.000

.00

± .15

Ordering Information

Note: Inverse ( Option “A” ) style shown. For Normal style rotate polarization keys and pin call outs 180°.

N7E50-X516XX-30

Options: CF Card Polarization / Solder Tabs / Ejector:

A = Inverse / with solder tab / ejector acceptable

C = Normal / without solder tab / ejector not acceptable

D = Normal / with solder tab / ejector not acceptable

E = Normal / with solder tab / ejector acceptable

Options: Plating

PG = Au Flash over 25 m" [0.64 mm] PdNi Lubricated with Au Flash tails.

Available for "D" product option only.

PK = Au Flash over 20 µ" [0.5 µm] PdNi Lubricated with Au flash tails

1.27 Typ

[ .050 ]

2X .89

[ .035 ]

.79

[ .031 ]

(See note)

30.48 [ 1.200 ]

Pin 50

Pin 1

Pin 25

Pin 26

Pin 38

Pin 13

1.40

[ .055 ]

(See note)

1.27 Typ

[ .050 ]

38.74 [ 1.525 ]

45.0 [ 1.77 ]

48.0 [ 1.89 ]

15.6

[ .614 ]

0.635 [ .0250 ] Typ

2X Ø 2.20

[ .087 ]

2X 3.3

[ .13 ]

1.37 [ .054 ]

Ø 0.44 Typ

[ .017 ]

Section A-A

13.7

[ .54 ]

6.70

[ .264 ]

6.00 [ .236 ]

4.50 [ .177 ]

0.30 [ .012 ] Typ

32.84 [ 1.293 ]

2X 0.9 [ .04 ]

43.03 [ 1.694 ] 4.0 [ .16 ]

1.5 [ .06 ]

Ø1.5 [ .06 ]

1.0 [ .04 ]

(RIA E1 & C1 apply)

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ CF Card Header

CompactFlash Type I, Low Profile, Surface Mount 7E50 Series

TS-0747-C

Sheet 3 of 3

38.74 ± 0.10

[ 1.525 ]

2X 2.50 ± 0.15

[ .098 ]

Recommended PCB Solder Pad Pattern

The Direction of Inserting Card

2X Ø2.20 ± 0.05

[ .087 ]

( Through for M2 )

2X Ø1.70 ± 0.03

[ .067 ]

( Through for locating Boss )

The End of P.C. Board

1.95 ± 0.15

[ .077 ]

44.20 ± 0.15

[ 1.740 ]

3.50 ± 0.05

[ .138 ]

2X 4.5 ± 0.15

[ .18 ]

7.75 ± 0.05

[ .305 ]

3.00 ± 0.10

[ .118 ]

20.5 Min

[ .81 ]

0.40 ± 0.03 Typ

[ .016 ]

0.635 ± 0.03 Typ

[ .0250 ]

Pin 1

Pin 26

Pin 1

31.11 ± 0.05

[ 1.225 ]

( Normal )

( Inverse )

25.81 Ref

[ 1.016 ]

23.10 Ref

[ .909 ]

51.4 [ 2.02 ]

26.5

[ 1.04 ]

43.9 Ref

[ 1.73 ]

17.4

[ .69 ]

Ref

7.0 [ .28 ]

Pushing Length

4.1 [ .16 ]

Ejecting

Length

7.0 [ .28 ]

Sliding Length

3M 7E50

Marking

Area

Centerline of Header

4. 0 [ .16 ]

5.4 [ .21 ]

5.4 [.21]

Installed

Height

Right Button Ejector 3M Part D7E50-8316-03

( Order Separately )

Material

Holder: Glass Filled LCP

Button: PBT

Plate: Stainless Steel

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/17/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-b

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the

warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

Please recycle. Printed in USA.

RIA-2217B-b

3M Electronics

Interconnect Products

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373 3M is a trademark of 3M Company.