T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: WP130WCP/2GYW Green Yellow Features Description z Bi-level right angle housing LED. The Green source color devices are made with Gallium z Pre-trimmed leads for pc board mounting. Phosphide Green Light Emitting Diode. z Black case enhances contrast ratio. The Yellow source color devices are made with Gallium z High reliability. Arsenide Phosphide on Gallium Phosphide Yellow Light z Housing UL rating:94V-0. Emitting Diode. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF1892 REV NO: V.3 DATE: APR/06/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000167 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 18 40 10 20 Green (GaP) WP130WCP/2GYW Viewing Angle [1] 21/2 60 White Diffused Yellow (GaAsP/GaP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 590 nm IF=20mA Green Yellow 568 588 nm IF=20mA Spectral Line Half-width Green Yellow 30 35 nm IF=20mA C Capacitance Green Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Green Yellow 2.2 2.1 2.5 2.5 V IF=20mA IR Reverse Current Green Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Yellow Units 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current [1] 140 140 mA Power dissipation Reverse Voltage 5 Operating / Storage Temperature V -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF1892 REV NO: V.3 DATE: APR/06/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000167 WP130WCP/2GYW Green SPEC NO: DSAF1892 REV NO: V.3 DATE: APR/06/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000167 Yellow SPEC NO: DSAF1892 REV NO: V.3 DATE: APR/06/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000167 PACKING & LABEL SPECIFICATIONS WP130WCP/2GYW SPEC NO: DSAF1892 REV NO: V.3 DATE: APR/06/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000167 SPEC NO: DSAF1892 REV NO: V.3 DATE: APR/06/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000167