SMC30J 3000 W TransilTM Datasheet - production data Description The SMC30J Transil series has been designed to protect sensitive equipment against surges below 3000 W (10/1000 s) and against electro-static discharges according to IEC 61000-4-2, and MIL STD 883, method 3015. A K Unidirectional The Planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. SMC30J are packaged in SMC (SMC footprint in accordance with IPC 7531 standard). Bidirectional SMC (JEDEC DO-214AB) Features * Peak pulse power: - 3000 W (10/1000 s) * Stand off voltage range: from 5 V to 48 V * Unidirectional and bidirectional types * Low leakage current: 0.2 A * Operating Tj max: 175 C * JEDEC registered package outline Complies with the following standards * IEC 61000-4-2 exceeds level 4 - 30 kV (air discharge) - 30 kV (contact discharge) * MIL STD 883G, method 3015-7 Class 3B - 25 kV HBM (human body model) * Resin meets UL 94, V0 * MIL-STD-750, method 2026 solderability * EIA STD RS-481 and IEC 60286-3 packing * IPC 7531 footprint TM: Transil is a trademark of STMicroelectroniocs July 2015 This is information on a product in full production. DocID022064 Rev 3 1/10 www.st.com Characteristics 1 SMC30J Characteristics Table 1. Absolute maximum ratings (Tamb = 25 C) Symbol Parameter Value Unit 3000 W PPP Peak pulse power dissipation Tstg Storage temperature range -65 to +175 C Tj Operating junction temperature range -55 to +175 C TL Maximum lead temperature for soldering during 10 s. 260 C Value Unit 15 C/W Tj initial = Tamb Table 2. Thermal resistances Symbol Rth(j-l) Parameter Junction to leads Figure 1. Electrical characteristics - definitions Symbol VRM VBR VCL IRM IPP T VF RD Parameter Stand-off voltage Breakdown voltage Clamping voltage Leakage current @ VRM Peak pulse current Voltage temperature coefficient Forward voltage drop Dynamic resistance Unidirectional I I IF IPP VF VCL VBR VRM V VCLVBR VRM IR IRM V IRM IR IRM IR IPP IPP Figure 2. Pulse definition for electrical characteristics Repetitive pulse current tr = rise time (s) tp = pulse duration time (s) tr 2/10 tp DocID022064 Rev 3 VRMVBR VCL Bidirectional SMC30J Characteristics Table 3. Electrical characteristics - parameter values (Tamb = 25 C) VCL @IPP 10/1000 s VBR @IR(1) IRM max@VRM Order code min typ RD (2) 10/1000 s max T (3) max mA V A(4) 10-4/ C 6.74 10 9.2 327 0.008 5.7 6.7 7.05 10 10.3 291 0.011 5.9 6.5 7.2 7.58 10 11.2 268 0.014 6.1 10 8.5 9.4 9.9 1 14.4 208 0.022 7.3 SMC30J10A/CA 0.2 10 11.1 11.7 1 17 176 0.030 7.8 SMC30J12A/CA 0.2 12 13.3 14 1 19.9 151 0.039 8.3 SMC30J13A/CA 0.2 13 14.4 15.2 1 21.5 140 0.045 8.4 SMC30J15A/CA 0.2 15 16.7 17.6 1 24.4 123 0.055 8.8 SMC30J16A/CA 0.2 16 17.8 18.7 1 26 115 0.063 8.8 SMC30J18A/CA 0.2 18 20 21.1 1 29.2 103 0.079 9.2 SMC30J20A/CA 0.2 20 22.2 23.4 1 32.4 93 0.097 9.4 SMC30J22A/CA 0.2 22 24.4 25.7 1 35.5 85 0.115 9.6 SMC30J24A/CA 0.2 24 26.7 28.1 1 38.9 77 0.140 9.6 SMC30J26A/CA 0.2 26 28.9 30.4 1 42.1 71 0.165 9.7 SMC30J28A/CA 0.2 28 31.1 32.7 1 45.4 66 0.192 9.8 SMC30J30A/CA 0.2 30 33.3 35.1 1 48.4 62 0.215 9.9 SMC30J33A/CA 0.2 33 36.7 38.6 1 53.3 56 0.261 10.0 SMC30J36A/CA 0.2 36 40.0 42.1 1 58.1 48.41 0.331 10.0 SMC30J40A/CA 0.2 40 44.4 46.7 1 64.5 43.5 0.409 10.1 SMC30J48A/CA 0.2 48 53.2 56.0 1 76.6 38.0 0.542 10.3 A V V SMC30J5.0A/CA 500 5 6.4 SMC30J6.0A/CA 500 6 SMC30J6.5A/CA 250 SMC30J8.5A/CA 1. Pulse test: tp < 50 ms 2. To calculate maximum clamping voltage at other surge level,use the following formula: VCLmax = VCL - RD x (IPP - IPPappli) where IPPappli is the surge current in the application 3. To calculate VBR or VCL versus junction temperature, use the following formulas: VBR @ TJ = VBR @ 25C x (1 + T x (TJ - 25)) VCL @ TJ = VCL @ 25C x (1 + T x (TJ - 25)) 4. Surge capability given for both directions for unidirectional and bidirectional types. DocID022064 Rev 3 3/10 10 Characteristics SMC30J Figure 3. Peak pulse power dissipation versus Figure 4. Peak pulse power versus exponential initial junction temperature pulse duration (Tj initial = 25 C) 4000 PPP(W) 1000.0 10/1000 s PPP(kW) Tjinitial = 25 C 3500 3000 100.0 VBR < 36 V 2500 2000 10.0 VBR 36 V 1500 1.0 1000 500 0 Tj (C) 0 25 50 75 100 125 150 175 200 Figure 5. Clamping voltage versus peak pulse current (exponential waveform, maximum values) I PP (A) 8/20 s 10/1000 s Tj i nitial = 25 C 10/1000 s tP(ms) 0.1 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 Figure 6. Junction capacitance versus reverse applied voltage for unidirectional types C(nF) 100.0 F = 1 MHz V OSC = 30 mV T j = 25 C 1000.0 SMC30J5.0A 10.0 100.0 RMS SMC30J15A 10.0 1.0 SMC30J48A/CA SMC30J33A/CA SMC30J22A/CA SMC30J15A/CA SMC30J5.0A/CA 1.0 0.1 1 10 SMC30J48A VCL(V) V R (V) 0.1 1 100 Figure 7. Junction capacitance versus reverse applied voltage for bidirectional types 100. 0 SMC30J33A 100.0 I FM (A) RMS SMC30J5.0CA 10. 0 100 Figure 8. Peak forward voltage drop versus peak forward current C(nF) F = 1 MHz V OSC = 30 mV T j = 25 C 10 10.0 T j = 25 C T j = 150 C SMC30J15CA 1. 0 1.0 SMC30J33CA T j = 175 C SMC30J48CA V R (V) 0. 1 1 4/10 10 100 V FM (V) 0.1 0.0 DocID022064 Rev 3 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 SMC30J Characteristics Figure 9. Relative variation of thermal impedance versus pulse duration Figure 10. Thermal resistance junction to ambient versus copper surface under each lead = 5 WK MD WK MD 5HFRPPHQGHGSDGOD\RXW 5WK MD &: (SR[\SULQWHGERDUG)5FRSSHUWKLFNQHVV P 6LQJOHSXOVH (SR[\SULQWHGERDUG)5FRSSHUWKLFNQHVV P ( W V 3 ( ( ( ( 6 &8 FP Figure 11. Leakage current versus junction temperature (typical values) 100000 IR(nA) VR=VRM VRM < 10V 10000 1000 100 VRM 10V 10 1 25 TJ (C) 50 75 100 125 DocID022064 Rev 3 150 175 5/10 10 Ordering information scheme 2 SMC30J Ordering information scheme Figure 12. Ordering information scheme SM Surface mount Package C = SMC package Peak pulse power 30J = 3000 W Stand off voltage Example: 28 = 28 V Type A = Unidirectinal CA = Bidirectional 6/10 DocID022064 Rev 3 C 30J xx - CA SMC30J 3 Package information Package information * Case: JEDEC DO-214AB molded plastic over planar junction * Terminals: solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: for unidirectional types the band indicates cathode * Flammability: epoxy is rated UL94V-0 * RoHS package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 4. SMC package dimensions Dimensions Ref. E1 D C A2 E2 L b Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 2.90 3.2 0.114 0.126 c 0.15 0.41 0.006 0.016 E 7.75 8.15 0.305 0.321 E1 6.60 7.15 0.260 0.281 E2 4.40 4.70 0.173 0.185 D 5.55 6.25 0.218 0.246 L 0.75 1.60 0.030 0.063 Figure 13. Footprint dimensions mm (inches) 1.54 (0.061) 5.11 (0.201) Inches Min. E A1 Millimeters Figure 14. Marking layout(1) 1.54 (0.061) Cathode bar ( unidirectional 3.14 (0.124) x x x z y ww devices only ) : ECOP AC K ( Leadfree ) mention XXX : M arking Z : M an ufactur ing location Y : Y ear WW : week 8.19 (0.322) 1. Marking layout can vary according to assembly location. DocID022064 Rev 3 7/10 10 Package information SMC30J Table 5. Marking Order code 8/10 Marking Order code Marking SMC30J5.0A 3AAA SMC30J5.0CA 3BAA SMC30J6.0A 3AAB SMC30J6.0CA 3BAB SMC30J6.5A 3AAC SMC30J6.5CA 3BAC SMC30J8.5A 3AAD SMC30J8.5CA 3BAD SMC30J10A 3AAW SMC30J10CA 3BAW SMC30J12A 3AAF SMC30J12CA 3BAF SMC30J13A 3AAG SMC30J13CA 3BAG SMC30J15A 3AAH SMC30J15CA 3BAH SMC30J16A 3AAI SMC30J16CA 3BAI SMC30J18A 3AAJ SMC30J18CA 3BAJ SMC30J20A 3AAK SMC30J20CA 3BAK SMC30J22A 3AAL SMC30J22CA 3BAL SMC30J24A 3AAE SMC30J24CA 3BAE SMC30J26A 3AAM SMC30J26CA 3BAM SMC30J28A 3AAN SMC30J28CA 3BAN SMC30J30A 3AAO SMC30J30CA 3BAO SMC30J33A 3AAP SMC30J33CA 3BAP SMC30J36A 3AAQ SMC30J36CA 3BAQ SMC30J40A 3AAR SMC30J40CA 3BAR SMC30J48A 3AAS SMC30J48CA 3BAS DocID022064 Rev 3 SMC30J 4 Ordering information Ordering information Table 6. Ordering information Table 7. Order code SMC30JxxxA/CA(1) Marking Package Weight Base qty Delivery mode See Table 5 on page 8 SMC 0.25 g 2500 Tape and reel 1. Where xxx is nominal value of VBR and A or CA indicates unidirectional or bidirectional version. See Table 3 for list of available devices and their order codes 5 Revision history 02-Jul. Table 8. Document revision history Date Revision Changes 28-Jul-2011 1 Initial release. 15-Jul-2015 2 Updated features on cover page. Updated Table 1, Figure 3, Figure 5, Figure 6, Figure 7, Figure 8, Figure 10 and Figure 11. Updated Table 5. 22-Jul-2015 3 Updated Figure 9. DocID022064 Rev 3 9/10 10 SMC30J IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2015 STMicroelectronics - All rights reserved 10/10 DocID022064 Rev 3