S/MOD/SKH20120/B/16/06/2000 page 1 / 3 F/GB Relais Statique pour circuit imprime Solid State Relay for printed circuit board SKH20120 8-32VDC control 10A*/ 230VAC output * Gamme pour circuit imprime avec radiateur integre. * Sortie AC synchrone. * Calibre element de puissance: 16A * Technologie DCB ( Direct Copper Bonding) * Range for printed circuit board with integrated heatsink * Zero-cross AC Output. * Power element size : 16A * DCB technology ( Direct Copper Bonding) 28 24,2 1,73 Ph Ph SK model 7,5 4 6,3 Application typique/Typical application 35,7 Ces produits sont disponibles avec d'autres tailles de thyristors : 25A , 50A/1800A2s et 75A/5000A2s pour de tres hautes performances. These products are available with other sizes thyristors: 25A ,50A/1800A2s and 75A /5000A2s for high performances. DIMENSIONS * :La limite du produit est 10A @20C en air tolerances 0,2mm 22 calme et peut atteindre 16A en regime 43,6 12,7 ventile avec le radiateur limite a 85C. The product limit is given at 10A @20C with convection cooling and can reach 16A in forced celduc SKH air at a case of temperature of 85C. 3 2 1 VDR on the PCB O1 5,08 12,7 10,16 7,83 Rc Top view Ou / Or SSR 3+ Ic Charge / Load 1~ VDR on the PCB SK model Uc Charge / Load 4- SSR 2~ 2,54 N N Trou / Hole O 1,6 fig. 1 :Caracteristique d'entree / Control characteristic Max 32 18 1 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Tension assignee Isolement/Rated impulse voltage Uimp 4 000 Isolement entree-sortie / Input-output isolation U 4000 Isolement E-S/semelle/ I-O/ case U 3300 Unit V mA V 21 18 15 Ic (mA) Caracteristiques de commande (a 20C) / Control characteristics (at 20C) DC Parametres / Parameters Symbol Min Nom Tension de commande / Control voltage Uc 8 24 Courant de commande / Control current (@ Uc nom ) Ic 3,5 13,5 Tension de relachement/Release voltage Uc off Resistance interne / Input internal resistor fig.1 Rc 1640 12 9 6 V VRMS VRMS 3 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Uc (V) Caracteristiques generales / General characteristics Parametres / Parameters Poids/Weight Temperature de stockage / Storage temperature Temperature de fonctionnement / Operating temperature Conditions Symbol Typ. 30 -40/+120 -40/+80 Unit g C C celduc All technical characteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. r e l a i s S/MOD/SKH20120/B/16/06/2000 page 2 / 3 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametres / Parameters Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal / Nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Conditions Ie nom tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite /Conducted immunity level: with external VDR EMC Test d'immunite /Conducted immunity level : with external VDR Conformite / Conformity Homologation / Approbal Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (bursts) IEC 1000-4-5 (shocks) EN60947-4-x and 5-1 Symbol Typ. Unit Ue 230 V rms Uemin-max 12-280 V rms Up 600 V Usync 12 V Ua 8 V Ie 16 (*) A rms Itsm 160 A Vd 1,6 V Ilk 1 mA Iemin 5 mA ton max 10 ms toff max 10 ms f 10-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 128 A2s 2kV criterion A with external VDR 2kV criterion A with external VDR / pr EN61810-xxx UL pending * : / Limite par le radiateur et le circuit imprime / limited by the heatsink and the printed circuit board I (A) Fig.2 Caracteristiques thermiques / thermal curves : I max = f(Ta) 26 24 22 20 18 16 14 12 10 8! 6! 4! 2! 0 0! Ventilation forcee avec temperature du dissipateur limitee a 85C./ Forced air cooling with heatsink temperature 85C max Convection naturelle/ Convection cooling 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature ( C) Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. * Use a VDR across the output : minimum size : 14 mm Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. * Prevoir un varistor externe en parallele sur la sortie : taille mini : 14mm celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 S/MOD/SKH20120/B/16/06/2000 page 3 / 3 F/GB Surge current Itsm (A peak) = f(t) for models with Itsm =160A Itsm (Apeak) 200 150 No repetitive Itsm (Apeak)=f(t) without voltage reapplied 100 50 0 0,01 Repetitive Itsm (Apeak)=f(t) with voltage reapplied for initial Tj =70C 0,1 1 10 t (s) fig 3 celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19