LC Series Subminiature Precision Snap-acting Switches Features/Benefits * Compact design * Long life and high electrical capacity * Quick connect, wire lead or PC mounting * Wide variety of actuator styles Typical Applications * Motorized equipment * Sump pump * Thermostatic controls Specifications Materials CONTACT RATING: From low level* to 10.1 AMPS @ 250 V AC. ELECTRICAL LIFE: 100,000 cycles INSULATION RESISTANCE: 1,000 M min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -17F to 185F (-25C to 85C). OPERATING FORCE: From 142 to 170 grams at actuator button. Forces are less at free end of lever actuators; (see OPERATING FORCE and ACTUATOR option sections). MOUNTING: 2-56 screws, torque 2.3 in/lbs max. SWITCH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 94V-0). ACTUATOR BUTTON: Thermoplastic polyester (UL 94V-0). SPRING: Copper alloy. PIVOT: Copper alloy. MOVABLE CONTACTS: Fine silver for ratings greater than 1 AMP @ 125 V AC. Fine silver with 24K gold plate for 1 AMP @ 125 V AC or less. STATIONARY CONTACTS: Fine silver welded on copper alloy for ratings greater than 1 AMP @ 125 V AC. Gold alloy welded on copper alloy for ratings less than 1 AMP @ 125 V AC. TERMINALS: Copper alloy. TERMINAL SEAL: Epoxy. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-18 through J-20. For additional options not shown in catalog, consult Customer Service Center. L C Series LC SP, Mom. Operating Force GG 5 oz./142 grams GD 3.3 oz./94 grams GH 6 oz./170 grams Electrical Rating X1 UL 61058-1 (see chart) V6 UL 61058-1 (see chart) V7 UL 61058-1 (see chart) F5 UL 1054 (see chart) L9 UL 1054 (see chart) M1 UL 1054 (see chart) Actuator P00 Pin plunger A10 .28" lever roller, high force A15 .51" lever roller, high force A20 .39" lever roller, low force A25 .61" lever roller, low force T10 .29" lever, high force T13 .22" simulated roller, high force T15 .57" lever, high force T20 .38" lever, low force T23 .32" simulated roller, low force T25 .67" lever, low force Terminations E Solder H .110" quick connect J Wire lead L Left formed PC thru-hole R Right formed PC thru-hole S PC Thru-hole * Extended operations only available on Electrical Rating options F5, L9 and M1 Circuitry C SPDT W SPST N.C. Y SPST N.O. Electrical Life NONE 6,000 operations U* Extended 100,000 operations Seal NONE (STD.) No seal E Epoxy seal Dimensions are shown: Inches (mm) Specifications and dimensions subject to change J-17 www.ck-components.com Snap-acting Build-A-Switch J LC Series Subminiature Precision Snap-acting Switches SERIES LC SUBMINIATURE PRECISION SNAP-ACTING SWITCHES SP MOMENTARY 0.297 (7,54) OPERATING FORCE Snap-acting J OPTION CODE BASIC SWITCH OPERATING FORCES (OZ./GRAMS) GG 5 142 GD 3.3 94 GH 6 170 NOTE: Operating force varies with actuator option, see ACTUATOR option section. ELECTRICAL RATING UL 61058-1 OPTION CODE ELECTRICAL RATING CONTACT MATERIAL MOVABLE CONTACT Fine silver with 24K gold plate STATIONARY CONTACT RoHS COMPLIANT* RoHS COMPATIBLE* Fine silver with 24K gold plate on copper base alloy Yes Yes X1 1A GP, 250 Vac, 50/60 Hz, 25E3, T85 1RA, 30 Vdc, 1E4, T85 V6 5(2)A RM, 250 Vac, 50/60 Hz, 1E4, T85 5A GP, 250 Vac, 50/60 Hz, 1E4, T85 5RA, 30 Vdc, 1E4, T85 1/3 HP, 125/250 Vac, 50/60 Hz, 1E4, T85 Fine silver Fine silver welded on copper base alloy Yes Yes V7 10(2)A RM, 250 Vac, 50/60 Hz, 1E4, T85 10A GP, 250 Vac, 50/60 Hz, 1E4, T85 10RA, 30 Vdc, 1E4, T85 1/3 HP, 125/250 Vac, 50/60 Hz, 1E4, T85 Fine silver Fine silver welded on copper base alloy Yes Yes RoHS COMPLIANT* RoHS COMPATIBLE* Yes Yes UL 1054 OPTION CODE ELECTRICAL RATING CONTACT MATERIAL MOVABLE CONTACT Fine silver with 24K gold plate STATIONARY CONTACT Fine silver with 24K gold plate on copper base alloy F5 1A, 125 V AC, 30 VDC 100,000 cycles ("U" option) L9 5A, 1/3 HP @ 125 and 250 V AC 100,000 cycles ("U" option) Fine silver Fine silver welded on copper base alloy Yes Yes M1 10.1A, 1/3 HP @ 125 and 250 V AC 100,000 cycles ("U" option) Fine silver Fine silver welded on copper base alloy Yes Yes * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. Consult Customer Service Center for availability and delivery of nonstandard ratings. *Low Level = conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-18 www.ck-components.com LC Series Subminiature Precision Snap-acting Switches ACTUATOR HIGH FORCE A A OPTION CODE FIG. DIM. A DIM. B DIM. C P00 1 0.297 (7,6) .330 .015 (8,38 0,38) -- A10 7 0.28 (7,1) .570 .070 (14,48 1,78) .19 dia. (4,8O) A25 2 0.61 (15,5) .570 .175 (14,22 4,45) .19 dia. (4,8O) T10 3 0.29 (7,4) .340 .070 (8,64 1,78) -- T13 5 0.220 (5,3) .455 .065 (11,56 1,65) -- T20 4 0.39 (9,9) .340 .140 (8,64 3,56) -- T23 6 0.32 (8,1) .455 .125 (11,56 3,18) -- T25 4 0.67 (17,0) .340 .091 (8,64 4,70) -- A15 7 0.51 (13,0) .560 .090 (14,22 2,29) .19 dia. (4,8O) A20 2 0.38 (9,7) .560 .135 (14,22 2,29) .19 dia. (4,8O) T15 3 0.57 (14,51) .340 .100 (8,64 2,54) -- A B B B FIG. 5 Simulated Roller FIG. 3 Lever FIG. 1 Pin Plunger LOW FORCE A C A A B B B FIG. 6 Simulated Roller FIG. 4 Lever FIG. 2 Lever Roller BASIC FORCE A J C Snap-acting B FIG. 7 Lever Roller SWITCH CHARACTERISTICS MINIMUM RELEASE FORCE (OZ./GRAMS) MAXIMUM OPERATING FORCE (OZ./GRAMS) OPTION CODE MAXIMUM DIFFERENTIAL TRAVEL MAXIMUM PRETRAVEL MINIMUM OVERTRAVEL GG GD GH GG GD GH ALL FORCES ALL FORCES ALL FORCES A10 1.69 48 1 28 2.0 57 .21 6 .11 3 .42 12 .034 (0,86) .140 (3,56) .029 (0,74) A15 1.3 37 .68 19 1.6 44 .16 4.5 .07 2 .32 9 .044 (1,12) .180 (4,57) .037 (0,94) A20 0.9 26 .52 15 1.1 31 .11 3 .05 15 .21 6 .067 (1,70) .272 (6,91) .053 (1,53) A25 .70 20 .42 12 .85 24 .07 2 .04 1 .16 4.5 .086 (2,18) .351 (8,92) .068 (1,73) P00 5 142 3.3 95 6 170 1 28 .05 14 2.0 57 .004 (0,10) .030 (0,76) .010 (0,25) T10 1.7 48 1 28 2.1 60 .21 6 .10 3 .39 11 .035 (0,90) .140 (3,56) .029 (0,74) T13 1.8 52 1.2 34 2.2 62 .21 6 .03 1 .42 12 .032 (0,81) .130 (3,30) .026 (0,66) T20 0.9 26 .52 15 1.1 30 .10 3 .03 1 .21 6 .067 (1,70) .276 (7,01) .053 (1,35) T23 1.0 28 .52 15 1.2 34 .10 3 .03 1 .21 6 .062 (1,57) .252 (6,40) .049 (1,24) T25 0.7 19 .05 14 0.8 24 .07 2 .03 1 .14 4 .090 (2,29) .372 (9,45) .072 (1,83) T15 1.2 35 1.3 39 1.5 42 0.14 4 .21 6 .28 81 .047 (1,19) .190 (4,83) .040 (1,02) NOTE: For basic switch operating forces, see page J-18. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change J-19 www.ck-components.com LC Series Subminiature Precision Snap-acting Switches TERMINATIONS E H SOLDER .110" QUICK CONNECT NOTE: Use Amp Quick Connect Part No. 640932-1. J WIRE LEAD Snap-acting J R RATING WIRE SIZE 1 AMP 22 AWG 5 AMPS 20 AWG 10.1 AMPS 18 AWG TERMINAL WIRE COLOR COMMON BLACK NORMALLY OPEN WHITE NORMALLY CLOSED RED L LEFT FORMED PC THRU-HOLE PC MOUNTING S RIGHT FORMED PC TRU-HOLE PC THRU-HOLE PC MOUNTING PC MOUNTING 0.288 (7,32) CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) ELECTRICAL LIFE NONE U 6,000 OPERATIONS EXTENDED 100,000 OPERATIONS SEAL NONE E NO SEAL EPOXY J-20 EPOXY SEAL .075 MAX. (1,91) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C&K Components: LCGGX1T25EC LCGHF5T10SY LCGDL9T13EC LCGDF5A10LCU LCGGL9P00EC LCGGL9T10LC LCGDL9T10SC LCGDL9A10EC LCGGF5T13HCU LCGGF5A10HYU LCGGV6P00ECU LCGDL9P00EC LCGDL9A10SC LCGDL9P00HC LCGGV6T10SC LCGHF5A10ECE LCGHV6A10LC LCGDF5P00HC LCGGX1A10EW LCGHL9A10HCU LCGGL9P00SCE LCGGX1T20EY LCGHL9T10SC LCGGL9A10HC LCGGL9T13SCE LCGGF5T10LC LCGGL9T20HCE LCGGF5T10ECUE LCGDL9T23EC LCGGF5T23HCUE LCGGV6P00LC LCGGM1T10SC LCGHF5T23SCUE LCGHX1A10RCE LCGHF5T20SCU LCGHM1T10EC LCGDF5T10SW LCGGL9T23EC LCGHF5A10LCE LCGDL9P00SYE LCGHV6A10RC LCGHF5A10HC LCGHL9P00EC LCGGV6P00ECUE LCGGF5T10EC LCGGL9P00SY LCGGV6A10RC LCGGL9A10LCE LCGGF5T13SYU LCGGL9T23HCE LCGHL9P00SYU LCGGF5T10RC LCGHF5P00EC LCGGM1T10EC LCGDF5T13RWU LCGHF5T23ECU LCGGF5T13RC LCGHM1T23HC LCGGL9T23SC LCGDV6P00SCE LCGHF5A10RWE LCGGL9T10HC LCGGF5T23SC LCGDL9T10HC LCGHF5T10JWU LCGGF5A10ECU LCGHF5A10RYE LCGDF5T10EC LCGHV6P00RC LCGHV6T10HY LCGHX1T23JY LCGHM1P00EC LCGGV6P00SCUE LCGGL9P00SYUE LCGHF5T23HCUE LCGDX1P00EC LCGGF5A25ECU LCGHM1A10HC LCGGL9P00SYE LCGHL9P00SC LCGGL9T10SC LCGHM1P00HY LCGGV6T10RC LCGDF5T13SC LCGGM1A10HC LCGGV6A10LCE LCGGM1T10HC LCGGF5T23SYU LCGDL9P00JW LCGGF5P00HYU LCGHV6T20HY LCGDF5T23SC LCGGL9P00EYE LCGGF5P00HY LCGGV6A10SC LCGDV6T10EC LCGGX1T13SC LCGDF5P00HCU LCGDL9T25SC LCGGX1A10JCE