Ordering information AC-DC Power Supplies Enclosed Type PBW15F PBA/PBW PBA/PBW PB 1 W 2 15 3 F 4 Recommended EMI/EMC Filter NAC-06-472 R High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. -O 5 -O 6 1Series name 2Dual output 3Output wattage 4Universal input 5Output voltage 6Optional *10 C :with Coating G :Low leakage current E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover N1 :with DIN rail V :Output voltage setting potentiometer externally Cover is optional MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PBW15F-12 16.8 VOLTAGE[V] *6 t12 ( +24 ) CURRENT1[A] 0.7 CURRENT2[A] *5 1.4 *5 PBW15F-15 15.0 t15 ( +30 ) 0.5 1.0 SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] ACIN 100V ACIN 200V FREQUENCY[Hz] INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS ACIN 100V ACIN 200V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT1[A] CURRENT2[A] *5 *9 LINE REGULATION[mV] *11 *3 LOAD REGULATION 1[mV] *11 *4 LOAD REGULATION 2[mV] *11 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C DRIFT[mV] *2 START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION[V] OPERATING INDICATION REMOTE ON/OFF INPUT-OUTPUT INPUT-FG OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS (At only AC input) CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD EFFICIENCY[%] PBW15F-12 PBW15F-15 AC85 - 264 1f or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *8) 0.40typ (CURRENT1) 0.20typ (CURRENT1) 50/60 (47 - 440) or DC 74typ (CURRENT1) 78typ (CURRENT1) 77typ (CURRENT1) 80typ (CURRENT1) 15typ (CURRENT1) (At cold start) 30typ (CURRENT1) (At cold start) 0.15/0.30max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) / ( +30V reference number ) / ( +24V reference number ) t12 t15 0.7 / 0.7 0.5 / 0.5 1.4 /1.0 /60max / 96max 60max / 96max 600max / 150max 600max / 150max 750max /750max /120max / 240max 120max / 240max 160max / 320max 160max / 320max 150max / 300max 150max / 300max 180max / 360max 180max / 360max 120max 150max 150max 180max 48max 60max 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. 20typ (ACIN 100V, Io=100%) 9.60 - 13.2 (+V and -V are simultaneously adjusted) 13.2 - 16.5 (+V and -V are simultaneously adjusted) 11.5 - 12.5 (+V and -V CURRENT1) 14.4 - 15.6 (+V and -V CURRENT1) Works over 105% of rated current and recovers automatically 16.8 - 24.0 20.0 - 29.0 LED (Green) None AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature) -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B Complies with IEC61000-3-2 (Not built-in to active filter *7) *12 31X78X85mm [1.22X3.07X3.35 inches] (without terminal block) (WXHXD) / 200g max (with cover : 235g max) Convection *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Figures for 0 to rated current 1.The current not measured side is fixed. *4 Figures for 0 to rated current 2.The current not measured side is fixed. *5 The sum of +power -power must be less than output power. *6 t12,t15 can be used as +24 and +30. *7 When two or more units are used,they may not comply with the harmonic attenuator. Please contact us for details. *8 Derating is required. *9 Figures to rated current 1. *10 Please contact us about safety approvals for the model with option. *11 Please contact us about dynamic load and input response. *12 Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBA/PBW-26 PBA/PBW-26 PB_E.indd 26 15.6.18 5:47:58 PM PBW15F PBA/PBW Block diagram FUSE AC250V 2.5A INRUSH CURRENT LIMIT NOISE FILTER AC IN 85 - 264V RECTIFIER AND FILTER FG TRANSFORMER CONTROL RECTIFIER AND FILTER INVERTER +V COM CURRENT SENSING RECTIFIER AND FILTER DC OUT -V Photocoupler CONTROL Photocoupler OVER VOLTAGE PROTECTION External view External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. Voltage adjust 18 2.5 [0.71] [0.1] LED 12.21.5 [0.48] Cover name plate 16.5 2 85 [0.65] [3.35] M3 +V [0.89] 78 36.5 [1.22] [1.44] [1.36] 7.5 34.5 310.5 Point A:C102 2-M3 Mounting hole Name plate 2-M3 Mounting hole 18 Tolerance : 1 [0.04] Weight : 200g max (with cover : 235g max) PCB Material/thickness : CEM3 / 1.6mm [0.06] Chassis material : Electric galvanizing steel board Dimensions in mm, [ ]= inches Mounting torque : 0.6N * m(6.3kgf * cm)max Screw tightening torque : M3 0.8N * m(8.5kgf * cm)max Please connect safety ground to the unit in 2-M3 holes. 60 0.5 [2.36] [0.71] 31 PBA15F PBW15F 34.5 22.61.5 Terminal cover [1.36] [0.59] [1.22] 15.11.5 [0.3] AC(L) AC(N) 11.5 9.5 FG [3.07] Cover (option) -V [0.45] [0.37] 70.5 [2.78] COM 5 [0.2] PBA/PBW-27 PBA/PBW-27 PB_E.indd 27 15.6.18 5:47:59 PM Ordering information AC-DC Power Supplies Enclosed Type PBW30F PBA/PBW PBA/PBW PB 1 W 2 30 3 F Recommended EMI/EMC Filter NAC-06-472 R -O 4 5 -O 6 1Series name 2Dual output 3Output wattage 4Universal input 5Output voltage 6Optional *10 C :with Coating G :Low leakage current High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover N1 :with DIN rail V :Output voltage setting potentiometer externally Cover is optional MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PBW30F-5 15 VOLTAGE[V] *6 t5 ( +10 ) CURRENT1[A] 1.5 CURRENT2[A] *5 2.0 *5 PBW30F-12 31.2 t12 ( +24 ) 1.3 1.7 PBW30F-15 30.0 t15 ( +30 ) 1.0 1.4 SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] ACIN 100V ACIN 200V FREQUENCY[Hz] INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS ACIN 100V ACIN 200V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT1[A] CURRENT2[A] *5 *9 LINE REGULATION[mV] *11 *3 LOAD REGULATION 1[mV] *11 *4 LOAD REGULATION 2[mV] *11 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C DRIFT[mV] *2 START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION[V] OPERATING INDICATION REMOTE ON/OFF INPUT-OUTPUT INPUT-FG OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS (At only AC input) CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD EFFICIENCY[%] PBW30F-5 PBW30F-12 PBW30F-15 AC85 - 264 1f or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *8) 0.4typ (CURRENT1) 0.7typ (CURRENT1) 0.25typ (CURRENT1) 0.4typ (CURRENT1) 50/60 (47 - 440) or DC 75typ (CURRENT1) 77typ (CURRENT1) 78typ (CURRENT1) 75typ (CURRENT1) 81typ (CURRENT1) 79typ (CURRENT1) 15typ (CURRENT1) (At cold start) 30typ (CURRENT1) (At cold start) 0.30/0.65max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) / ( +10V reference number ) t12 / ( +24V reference number ) t15 / ( +30V reference number ) t5 1.5 / 1.5 1.3 / 1.3 1.0 / 1.0 2.0 /1.7 /1.4 /20max / 36max 60max / 96max 60max / 96max 250max / 100max 600max / 150max 600max / 150max 500max /750max /750max /80max / 240max 120max / 240max 120max / 240max 140max / 320max 160max / 320max 160max / 320max 120max / 300max 150max / 300max 150max / 300max 160max / 360max 180max / 360max 180max / 360max 50max 120max 150max 60max 150max 180max 20max 48max 60max 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. 20typ (ACIN 100V, Io=100%) 4.99 - 6.00 (+V and -V are simultaneously adjusted) 9.60 - 13.2 (+V and -V are simultaneously adjusted) 13.2 - 16.5 (+V and -V are simultaneously adjusted) 4.99 - 5.30 (+V and -V CURRENT1) 11.5 - 12.5 (+V and -V CURRENT1) 14.4 - 15.6 (+V and -V CURRENT1) Works over 105% of rated current and recovers automatically 6.90 - 10.0 16.8 - 24.0 20.0 - 29.0 LED (Green) None AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature) -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B Complies with IEC61000-3-2 (Not built-in to active filter *7) *12 31X78X103mm [1.22X3.07X4.06 inches] (without terminal block) (W XHXD) / 270g max (with cover : 310g max) Convection *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Figures for 0 to rated current 1.The current not measured side is fixed. *4 Figures for 0 to rated current 2.The current not measured side is fixed. *5 The sum of +power -power must be less than output power. *6 t5,t12,t15 can be used as +10,+24 and +30. *7 When two or more units are used,they may not comply with the harmonic attenuator. Please contact us for details. *8 Derating is required. *9 Figures to rated current 1. *10 Please contact us about safety approvals for the model with option. *11 Please contact us about dynamic load and input response. *12 Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBA/PBW-28 PBA/PBW-28 PB_E.indd 28 15.6.18 5:48:00 PM PBW30F PBA/PBW Block diagram FUSE AC250V 3.15A INRUSH CURRENT LIMIT NOISE FILTER AC IN 85 - 264V RECTIFIER AND FILTER FG TRANSFORMER CONTROL RECTIFIER AND FILTER INVERTER +V COM CURRENT SENSING RECTIFIER AND FILTER DC OUT -V Photocoupler CONTROL Photocoupler OVER VOLTAGE PROTECTION External view External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. Voltage adjust 18 2.5 [0.71] [0.1] 12.21.5 [0.48] LED Cover name plate 16.5 2 103 [0.65] [4.06] M3 +V [1.59] Point A:C102 2-M3 Mounting hole Name plate 18 750.5 [2.95] [1.36] 2-M3 Mounting hole PBA30F PBW30F Tolerance : 1 [0.04] Weight : 270g max (with cover : 310g max) PCB Material/thickness : CEM3 / 1.6mm [0.06] Chassis material : Electric galvanizing steel board Dimensions in mm, [ ]= inches Mounting torque : 0.6N * m(6.3kgf * cm)max Screw tightening torque : M3 0.8N * m(8.5kgf * cm)max Please connect safety ground to the unit in 2-M3 holes. [3.07] 78 40.5 [1.81] [1.44] 36.5 460.5 34.5 [0.89] Terminal cover 31 22.61.5 [1.22] [0.59] [0.71] 15.11.5 7.5 AC(N) [0.3] FG AC(L) 11.5 9.5 Cover (option) -V [0.45] [0.37] 70.5 [2.78] COM 8.5 [0.33] PBA/PBW-29 PBA/PBW-29 PB_E.indd 29 15.6.18 5:48:01 PM Ordering information AC-DC Power Supplies Enclosed Type PBW50F PBA/PBW PBA/PBW PB 1 W 2 50 3 F Recommended EMI/EMC Filter NAC-06-472 R -O 4 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. 5 -O 6 1Series name 2Dual output 3Output wattage 4Universal input 5Output voltage 6Optional *9 C :with Coating G :Low leakage current (0.15mA max / ACIN 240V) E :Low leakage current and EMI class A (0.5mA max / ACIN 240V) T :Vertical terminal block J :Connector type R :with Remote ON/OFF N :with Cover N1 :with DIN rail V :Output voltage setting potentiometer externally Cover is optional MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PBW50F-5 30 VOLTAGE[V] *8 t5 ( +10 ) CURRENT1[A] 3.0 CURRENT2[A] *6 4.0 *6 PBW50F-12 50.4 t12 ( +24 ) 2.1 2.7 PBW50F-15 51 t15 ( +30 ) 1.7 2.4 SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] ACIN 100V ACIN 200V FREQUENCY[Hz] INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS ACIN 100V ACIN 200V ACIN 100V POWER FACTOR(Io=100%) ACIN 200V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT1[A] CURRENT2[A] *6 LINE REGULATION[mV] LOAD REGULATION 1[mV] *4 LOAD REGULATION 2[mV] *5 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C DRIFT[mV] *2 START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION[V] OPERATING INDICATION REMOTE ON/OFF INPUT-OUTPUT -RC *7 INPUT-FG OUTPUT-RC-FG *7 OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS (At only AC input) CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD EFFICIENCY[%] PBW50F-5 PBW50F-12 PBW50F-15 AC85 - 264 1f or DC120 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *3) 0.45typ (CURRENT1) 0.70typ (CURRENT1) 0.30typ (CURRENT1) 0.40typ (CURRENT1) 50/60 (47 - 63) 76typ (CURRENT1) 81typ (CURRENT1) 81typ (CURRENT1) 77typ (CURRENT1) 83typ (CURRENT1) 83typ (CURRENT1) 0.98typ 0.99typ 0.87typ 0.93typ 15typ (CURRENT1) (At cold start) 30typ (CURRENT1) (At cold start) 0.40/0.75max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) / ( +10V reference number ) t12 / ( +24V reference number ) t15 / ( +30V reference number ) t5 3.0 / 3.0 2.1 / 2.1 1.7 / 1.7 4.0 /2.7 /2.4 /20max / 36max 48max / 96max 60max / 96max 250max / 100max 600max / 150max 600max / 150max 500max /750max /750max /80max / 240max 120max / 240max 120max / 240max 140max / 320max 160max / 320max 160max / 320max 120max / 300max 150max / 300max 150max / 300max 160max / 360max 180max / 360max 180max / 360max 50max 120max 150max 60max 150max 180max 20max 48max 60max 350typ(ACIN 100V, Io=100%) 20typ (ACIN 100V, Io=100%) 4.99 - 6.00 (+V and -V are simultaneously adjusted) 9.60 - 13.2 (+V and -V are simultaneously adjusted) 13.2 - 16.5 (+V and -V are simultaneously adjusted) 4.99 - 5.30 (+V and -V CURRENT1) 11.5 - 12.5 (+V and -V CURRENT1) 14.4 - 15.6 (+V and -V CURRENT1) Works over 105% of rated current and recovers automatically 6.90 - 10.0 16.8 - 24.0 20.0 - 29.0 LED (Green) Optional (Required external power source) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B Complies with IEC61000-3-2 *10 31X82X120mm [1.22X3.23X4.72 inches] (without terminal block) (W XHXD) / 280g max (with cover : 325g max) Convection *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Derating is required. *4 Figures for 0 to rated current 1.The current not measured side is fixed. *5 Figures for 0 to rated current 2.The current not measured side is fixed. *6 The sum of +power -power must be less than output power. *7 RC is applied to remote ON/OFF option. RC is isolated with input/output and FG. *8 t5,t12,t15 can be used as +10,+24 and +30. *9 Please contact us about safety approvals for the model with option. *10 Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBA/PBW-30 PBA/PBW-30 PB_E.indd 30 15.6.18 5:48:03 PM PBW50F PBA/PBW Block diagram FUSE 250V2A NOISE FILTER AC IN 85 - 264V RECTIFIER INRUSH CURRENT LIMIT FG CURRENT SENSING BOOSTER INDUCTOR CURRENT SENSING OPTION RC EXTERNAL SOURCE CONTROL RECTIFIER AND FILTER E CONTROL OVER VOLTAGE PROTECTION INVERTER INVERTER CONTROL TRANSFORMER RECTIFIER AND FILTER +DC OUT RECTIFIER AND FILTER -DC OUT External view External size of option T,J,R,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. [0.65] [4.72] Cover name plate 0.5 (16.5) LED [0.02] (11) [0.43] 82 Voltage adjust [3.23] CN3 Connector for Remote ON/OFF (option) 120 (20) [0.79] 1 2 M3 +V 77 0.5 (14) 4 [3.03] [0.16] Terminal cover [0.85] 18 Tolerance : 1 [0.04] Weight : 280g max (with cover : 325g max) PCB Material/thickness : CEM3 / 1.6mm [0.06] Chassis material : Aluminum Dimensions in mm, [ ]= inches Mounting torque : 0.49N * m(5kgf * cm)max Screw tightening torque : M3 0.8N * m(8.5kgf * cm)max Please connect safety ground to the unit in 2-M3 holes. [1.36] PBW50F 34.5 Connector type 2-M3 Mounting hole CN3 Option (Mfr : J.S.T.) Name plate [1.22] (21.5) Point A 31 [0.55] [0.71] AC(N) A 2-M3 Mounting hole 35 [0.3] (12) 9.5 AC(L) [1.38] Cover (option) 7.5 -V FG [0.47] [0.37] [2.8] (71) COM Pin No. 1 2 Contents RC(+) RC( - ) Barrier strip type 88 0.5 [3.46] 11 [0.43] Model B2B-XH-A Mating Connector (Terminal) XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 ( ) PBA/PBW-31 PBA/PBW-31 PB_E.indd 31 15.6.18 5:48:04 PM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cosel: PBW15F-12 PBW15F-12-C PBW15F-12-CN PBW15F-12-E PBW15F-12-EN PBW15F-12-G PBW15F-12-GN PBW15F-12-J PBW15F-12-JN PBW15F-12-N PBW15F-12-N1 PBW15F-12-T PBW15F-12-TN PBW15F-12-V PBW15F-12-VN PBW15F-15 PBW15F-15-C PBW15F-15-CJ PBW15F-15-CN PBW15F-15-CN1 PBW15F-15-E PBW15F-15-EN PBW15F-15-G PBW15F-15-GN PBW15F-15-J PBW15F-15-JN PBW15F-15-N PBW15F-15-N1 PBW15F-15-T PBW15F-15-TN PBW15F-15-V PBW15F-15-VN PBW30F-12 PBW30F-12-C PBW30F-12-CN PBW30F-12-CN1 PBW30F-12-E PBW30F-12-EJ PBW30F-12-EJN PBW30F-12-EN PBW30F-12-G PBW30F-12-GN PBW30F-12-J PBW30F-12-JN PBW30F-12-N PBW30F-12-N1 PBW30F-12-T PBW30F-12-TN PBW30F-12-V PBW30F-12-VN PBW30F-15 PBW30F-15-C PBW30F-15-CJN PBW30F-15-CN PBW30F-15-CTN PBW30F-15-E PBW30F-15-EN PBW30F-15-G PBW30F-15-GN PBW30F-15-J PBW30F-15-JN PBW30F-15-N PBW30F-15-N1 PBW30F-15-T PBW30F-15-TN PBW30F-15-V PBW30F-15-VN PBW30F-5 PBW30F-5-C PBW30F-5-CN PBW30F5-E PBW30F-5-EN PBW30F-5-G PBW30F-5-GN PBW30F-5-J PBW30F-5-JN PBW30F-5-N PBW30F-5-N1 PBW30F-5-T PBW30F-5-TN PBW30F-5-V PBW30F-5-VN PBW50F-12 PBW50F-12-C PBW50F-12-CN PBW50F12-E PBW50F-12-EJ PBW50F-12-EN PBW50F-12-G PBW50F-12-GN PBW50F-12-GN1 PBW50F-12-J PBW50F12-JN PBW50F-12-N PBW50F-12-N1 PBW50F-12-R PBW50F-12-RN PBW50F-12-T PBW50F-12-TN PBW50F-12V