MODEL PBW50F-5 PBW50F-12 PBW50F-15
MAX OUTPUT WATTAGE[W]
*6
30 50.4 51
DC OUTPUT
VOLTAGE[V]
*8
t5(+10 )t12 (+24 )t15 (+30 )
CURRENT1[A]
3.0 2.1 1.7
CURRENT2[A]
*6
4.0 2.7 2.4
SPECIFICATIONS
MODEL PBW50F-5 PBW50F-12 PBW50F-15
INPUT
VOLTAGE[V] AC85 - 264 1for DC120 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *3)
CURRENT[A]
ACIN 100V
0.45typ (CURRENT1)0.70typ (CURRENT1)
ACIN 200V
0.30typ (CURRENT1)0.40typ (CURRENT1)
FREQUENCY[Hz] 50/60 (47 - 63)
EFFICIENCY[%]
ACIN 100V
76typ (CURRENT1)81typ (CURRENT1)81typ (CURRENT1)
ACIN 200V
77typ (CURRENT1)83typ (CURRENT1)83typ (CURRENT1)
POWER FACTOR(Io=100%)
ACIN 100V
0.98typ 0.99typ
ACIN 200V
0.87typ 0.93typ
INRUSH CURRENT[A]
ACIN 100V
15typ (CURRENT1)(
At cold start)
ACIN 200V
30typ (CURRENT1)(
At cold start)
LEAKAGE CURRENT[mA] 0.40/0.75max (ACIN 100V/240V 60Hz,Io=100%,According to IEC60950-1,DENAN)
OUTPUT
VOLTAGE[V] t5
/(+10V reference number )
t12
/(+24V reference number )
t15
/(+30V reference number )
CURRENT1[A] 3.0 / 3.0 2.1 / 2.1 1.7 / 1.7
CURRENT2[A]
*6
4.0 / - 2.7 / - 2.4 / -
LINE REGULATION[mV] 20max / 36max 48max / 96max 60max / 96max
LOAD REGULATION 1[mV]
*4
250max / 100max 600max / 150max 600max / 150max
LOAD REGULATION 2[mV]
*5
500max / - 750max / - 750max / -
RIPPLE[mVp-p]
0 to +50C
*1
80max / 240max 120max / 240max 120max / 240max
-10 - 0C
*1
140max / 320max 160max / 320max 160max / 320max
RIPPLE NOISE[mVp-p]
0 to +50C
*1
120max / 300max 150max / 300max 150max / 300max
-10 - 0C
*1
160max / 360max 180max / 360max 180max / 360max
TEMPERATURE REGULATION[mV]
0 to +50C
50max 120max 150max
-10 to +50C
60max 150max 180max
DRIFT[mV]
*2
20max 48max 60max
START-UP TIME[ms] 350typ(ACIN 100V,Io=100%)
HOLD-UP TIME[ms] 20typ (ACIN 100V,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
4.99 - 6.00 (+V and -V are simultaneously adjusted)9.60 - 13.2 (+V and -V are simultaneously adjusted)13.2 - 16.5 (+V and -V are simultaneously adjusted)
OUTPUT VOLTAGE SETTING[V]
4.99 - 5.30 (+V and -V CURRENT1)11.5 - 12.5 (+V and -V CURRENT1)14.4 - 15.6 (+V and -V CURRENT1)
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically
OVERVOLTAGE PROTECTION[V]
6.90 - 10.0 16.8 - 24.0 20.0 - 29.0
OPERATING INDICATION LED (Green)
REMOTE ON/OFF Optional (Required external power source)
ISOLATION INPUT-OUTPUT-RC
*7
AC3,000V 1minute,Cutoff current = 10mA,DC500V 50MWmin (At Room Temperature)
INPUT-FG AC2,000V 1minute,Cutoff current = 10mA,DC500V 50MWmin (At Room Temperature)
OUTPUT-RC-FG
*7
AC500V 1minute,Cutoff current = 100mA,DC500V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +71C(Required Derating), 20 - 90%RH (Non condensing)3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing)9,000m (30,000feet)max
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS (At only AC input)
UL60950-1,C-UL(CSA60950-1), EN60950-1,EN50178 Complies with DEN-AN
CONDUCTED NOISE Complies with FCC Part15 classB,VCCI-B,CISPR22-B,EN55011-B,EN55022-B
HARMONIC ATTENUATOR Complies with IEC61000-3-2
OTHERS CASE SIZE/WEIGHT 31X82X120mm [1.22X3.23X4.72 inches] (without terminal block)(
WXHXD)/ 280g max (with cover : 325g max)
COOLING METHOD Convection
*10
123456
PBA/PBW
PBA/PBW-30
Recommended EMI/EMC Filter
NAC-06-472
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The EMI/EMC Filter is recommended
*to connect with several devices.
*1Measured by 20MHz oscilloscope or Ripple-Noise
meter(equivalent to KEISOKU-GIKEN : RM101).
*2Drift is the change in DC output for an eight hour period
after a half-hour warm-up at 25C.
*3 Derating is required.
*4Figures for 0 to rated current 1.The current not measured
side is fixed.
*5Figures for 0 to rated current 2.The current not measured
side is fixed.
*6The sum of +power -power must be less than output power.
*7RC is applied to remote ON/OFF option. RC is isolated with
input/output and FG.
*8t5,t12,t15 can be used as +10,+24 and +30.
*9Please contact us about safety approvals for the model with
option.
*10Please contact us about class C.
*Parallel operation with other model is not possible.
*Derating is required when operated with cover.
*A sound may occur from power supply at peak loading.
Cover is optional
¶ Tolerance : ±1 [±0.04]
¶ Weight : 280g max (with cover : 325g max)
¶ PCB Material/thickness : CEM3 / 1.6mm [0.06]
¶ Chassis material : Aluminum
¶ Dimensions in mm, [ ]= inches
¶ Mounting torque : 0.49N • m(5kgf • cm)max
¶ Screw tightening torque : M3 0.8N • m(8.5kgf • cm)max
¶ Please connect safety ground to the unit in 2-M3 holes.
¶ External size of option T,J,R,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details.
LED
Voltage adjust
PBW50F
-V
CN3
Connector for Remote ON/OFF (option)
21
Cover name plate
Cover (option)
A
Name plate
M3
Mounting hole
2-M3
Mounting hole
2-M3
AC(N)
AC(L)
FG
COM
+V
Terminal cover
Point A
(16.5)
9.5
(12)
(20)
(11)
(71)
(21.5)
(14)
82
34.5
35
120
4
77±
0.5
7.5
88 ±0.5 11
18
31 0.5
Pin No. Contents
1
2RC(+)
RC(-)
CN3 Option (Mfr : J.S.T.)
Connector type
Model B2B-XH-A
Mating Connector (Terminal)
XHP-2
BXH-001T-P0.6
or SXH-001T-P0.6
Barrier strip type
()
[0.79]
[0.65] [4.72]
[3.03] [0.16]
[0.43][3.46]
[0.43]
[2.8]
[0.3][0.37][0.47]
[1.38]
[3.23]
[0.71]
[1.22]
[1.36]
[0.02]
[0.55]
[0.85]