10/2006 122
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
Typical applications: defl ection circuits in TV-sets and
monitors (S-correction), resonant capacitor in electronic
ballast and compact lamp, power factor correction and
coupling capacitor in SMPS, timing and oscillator circuits.
PRODUCT CODE: R75 (Digit 12: 0 to 9)
GENERAL TECHNICAL DATA
Dielectric: polypropylene fi lm.
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin fi lled.
Box material is solvent resistant and fl ame
retardant according to UL94 V0.
Marking: manufacturer’s logo, series (R75), dielectric
code (MKP), capacitance, tolerance, D.C. rated
voltage, manufacturing date code.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-16
Ød±0.05 p≤10 15≤p≤27.5 p = 37.5
0.6 0.8 1.0
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
123 4 5 67891011121314
R75 -
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
G = 160V I = 250V M = 400V
P = 630V Q = 1000V R = 1250V
T = 1600V U = 2000V
Digit 5 Pitch:
D = 7.5 mm; F = 10.0mm; I = 15.0mm;
N = 22.5 mm; R = 27.5mm; W = 37.5mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the fi rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identifi es the dimensions and electrical
characteristics (0 to 9).
Digit 13 Internal use.
Digit 14 Capacitance tolerance:
J=5%; K=10%; M=20%
Table 1 (for more detailed information, please refer to pages 14).
Standard
packaging style
Lead length Taping style Ordering code
(mm)
P2
(mm)
Fig.
(No.)
Pitch
(mm) (Digit 10 to 11)
AMMO-PACK 06.35 1 7.5 DQ
AMMO-PACK 12.70 2 10.0/15.0 DQ
AMMO-PACK 19.05 3 22.5 DQ
REEL Ø 355mm 06.35 1 7.5 CK
REEL Ø 355mm 12.70 2 10.0/15.0 GY
REEL Ø 500mm 12.70 2 10.0/15.0 CK
REEL Ø 500mm 19.05 3 22.5/27.5 CK
Loose, short leads 04+2 AA
Loose, long leads
(p<10mm) 17+1/-2 Z3
Loose, long leads
(p≥15mm)
30+5
25+2/-1
40
50
Note: Ammo-pack is the preferred packaging for taped version.
Loose
Taped
Fig. 1 Fig. 2 Fig. 3
Pitch Box thickness Maximum dimensions (mm)
(mm) (mm) B max H max L max
7.5 All B +0.1 H +0.1 L +0.2
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
10/2006
123
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
Rated
Cap.
160Vdc / 90Vac
Std dimensions
Max
dv/dt
Max
K0
Part Number
B H L p (V/µs) (V2µs)
0.068 µF 4.0 9.0 10.0 7.5 230 74 E3 R75GD2680--4--
0.082 µF 4.0 9.0 10.0 7.5 230 74 E3 R75GD2820--4--
0.10 µF 5.0 10.5 10.0 7.5 230 74 E3 R75GD3100--4--
0.12 µF 5.0 10.5 10.0 7.5 230 74 E3 R75GD3120--4--
0.15 µF 6.0 12.0 10.5 7.5 230 74 E3 R75GD3150--0--
0.18 µF 6.0 12.0 10.5 7.5 230 74 E3 R75GD3180--3--
0.082 µF 4.0 9.0 13.0 10.0 180 58 E3 R75GF 2820--0--
0.10 µF 4.0 9.0 13.0 10.0 180 58 E3 R75GF 3100--3--
0.12 µF 5.0 11.0 13.0 10.0 180 58 E3 R75GF 3120--0--
0.15 µF 5.0 11.0 13.0 10.0 180 58 E3 R75GF 3150--0--
0.18 µF 6.0 12.0 13.0 10.0 180 58 E3 R75GF 3180--0--
0.22 µF 6.0 12.0 13.0 10.0 180 58 E3 R75GF 3220--3--
0.18 µF 5.0 11.0 18.0 15.0 100 32 E3 R75GI 3180--0--
0.22 µF 5.0 11.0 18.0 15.0 100 32 E3 R75GI 3220--0--
0.27 µF 6.0 12.0 18.0 15.0 100 32 E3 R75GI 3270--0--
0.33 µF 6.0 12.0 18.0 15.0 100 32 E3 R75GI 3330--0--
0.39 µF 7.5 13.5 18.0 15.0 100 32 E3 R75GI 3390--0--
0.47 µF 7.5 13.5 18.0 15.0 100 32 E3 R75GI 3470--0--
0.47 µF 9.0 12.5 18.0 15.0 100 32 E3 R75GI 3470--6--
0.56 µF 8.5 14.5 18.0 15.0 100 32 E3 R75GI 3560--0--
0.56 µF 9.0 12.5 18.0 15.0 100 32 E3 R75GI 3560--6--
0.68 µF 8.5 14.5 18.0 15.0 100 32 E3 R75GI 3680--0--
0.68 µF 13.0 12.0 18.0 15.0 100 32 E3 R75GI 3680--6--
0.82 µF 10.0 16.0 18.0 15.0 100 32 E3 R75GI 3820--0--
1.0 µF 10.0 16.0 18.0 15.0 100 32 E3 R75GI 4100--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
1 section
(160Vdc)
single sided metallized
polypropylene fi lm
Rated
Cap.
160Vdc / 90Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
0.82 µF 7.0 16.0 26.5 22.5 60 19 E3 R75GN 3820--0--
1.0 µF 7.0 16.0 26.5 22.5 60 19 E3 R75GN 4100--0--
1.2 µF 8.5 17.0 26.5 22.5 60 19 E3 R75GN 4120--0--
1.5 µF 10.0 18.5 26.5 22.5 60 19 E3 R75GN 4150--0--
1.8 µF 10.0 18.5 26.5 22.5 60 19 E3 R75GN 4180--0--
1.5 µF 9.0 17.0 32.0 27.5 50 16 E3 R75GR 4150--0--
1.8 µF 9.0 17.0 32.0 27.5 50 16 E3 R75GR 4180--0--
2.2 µF 11.0 20.0 32.0 27.5 50 16 E6 R75GR 4220--3--
2.7 µF 11.0 20.0 32.0 27.5 50 16 E3 R75GR 4270--0--
3.3 µF 13.0 22.0 32.0 27.5 50 16 E3 R75GR 4330--0--
3.9 µF 13.0 22.0 32.0 27.5 50 16 E3 R75GR 4390--0--
4.7 µF 13.0 25.0 32.0 27.5 50 16 E3 R75GR 4470--3--
5.6 µF 14.0 28.0 32.0 27.5 50 16 E3 R75GR 4560--0--
6.8 µF 18.0 33.0 32.0 27.5 50 16 E3 R75GR 4680--0--
8.2 µF 18.0 33.0 32.0 27.5 50 16 E3 R75GR 4820--0--
10.0 µF 22.0 37.0 32.0 27.5 50 16 E3 R75GR 5100--0--
12.0 µF 22.0 37.0 32.0 27.5 50 16 E3 R75GR 5120--0--
3.3 µF 11.0 22.0 41.5 37.5 35 11 E3 R75GW 4330--0--
3.9 µF 11.0 22.0 41.5 37.5 35 11 E3 R75GW 4390--0--
4.7 µF 11.0 22.0 41.5 37.5 35 11 E3 R75GW 4470--0--
5.6 µF 13.0 24.0 41.5 37.5 35 11 E3 R75GW 4560--0--
6.8 µF 16.0 28.5 41.5 37.5 35 11 E3 R75GW 4680--0--
8.2 µF 16.0 28.5 41.5 37.5 35 11 E3 R75GW 4820--0--
10.0 µF 19.0 32.0 41.5 37.5 35 11 E3 R75GW 5100--0--
12.0 µF 19.0 32.0 41.5 37.5 35 11 E3 R75GW 5120--0--
15.0 µF 20.0 40.0 41.5 37.5 35 11 E3 R75GW 5150--0--
18.0 µF 20.0 40.0 41.5 37.5 35 11 E3 R75GW 5180--0--
22.0 µF 24.0 44.0 41.5 37.5 35 11 E3 R75GW 5220--0--
27.0 µF 30.0 45.0 41.5 37.5 35 11 E3 R75GW 5270--0--
33.0 µF 30.0 45.0 41.5 37.5 35 11 E3 R75GW 5330--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
10/2006 124
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
Rated
Cap.
250Vdc / 160Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.027 µF 4.0 9.0 10.0 7.5 300 150 E3 R75ID 2270--4--
0.033 µF 4.0 9.0 10.0 7.5 300 150 E3 R75ID 2330--4--
0.039 µF 4.0 9.0 10.0 7.5 300 150 E3 R75ID 2390--4--
0.047 µF 4.0 9.0 10.0 7.5 300 150 E3 R75ID 2470--4--
0.056 µF 4.0 9.0 10.0 7.5 300 150 E3 R75ID 2560--4--
0.068 µF 5.0 10.5 10.0 7.5 300 150 E3 R75ID 2680--4--
0.082 µF 5.0 10.5 10.0 7.5 300 150 E3 R75ID 2820--4--
0.10 µF 6.0 12.0 10.5 7.5 300 150 E3 R75ID 3100--3--
0.12 µF 6.0 12.0 10.5 7.5 300 150 E3 R75ID 3120--3--
0.033 µF 4.0 9.0 13.0 10.0 280 140 E3 R75IF 2330--0--
0.039 µF 4.0 9.0 13.0 10.0 280 140 E3 R75IF 2390--0--
0.047 µF 4.0 9.0 13.0 10.0 280 140 E3 R75IF 2470--3--
0.056 µF 4.0 9.0 13.0 10.0 280 140 E3 R75IF 2560--3--
0.068 µF 4.0 9.0 13.0 10.0 280 140 E3 R75IF 2680--3--
0.082 µF 5.0 11.0 13.0 10.0 280 140 E3 R75IF 2820--3--
0.10 µF 5.0 11.0 13.0 10.0 280 140 E3 R75IF 3100--3--
0.12 µF 6.0 12.0 13.0 10.0 280 140 E3 R75IF 3120--3--
0.15 µF 6.0 12.0 13.0 10.0 280 140 E3 R75IF 3150--3--
0.12 µF 5.0 11.0 18.0 15.0 200 100 E3 R75II 3120--3--
0.15 µF 5.0 11.0 18.0 15.0 200 100 E3 R75II 3150--3--
0.18 µF 5.0 11.0 18.0 15.0 200 100 E3 R75II 3180--4--
0.22 µF 5.0 11.0 18.0 15.0 200 100 E3 R75II 3220--4--
0.27 µF 6.0 12.0 18.0 15.0 200 100 E3 R75II 3270--4--
0.33 µF 6.0 12.0 18.0 15.0 200 100 E3 R75II 3330--4--
0.39 µF 7.5 13.5 18.0 15.0 200 100 E3 R75II 3390--4--
0.39 µF 9.0 12.5 18.0 15.0 200 100 E3 R75II 3390--7--
0.47 µF 7.5 13.5 18.0 15.0 200 100 E3 R75II 3470--4--
0.47 µF 9.0 12.5 18.0 15.0 200 100 E3 R75II 3470--8--
0.56 µF 7.5 13.5 18.0 15.0 200 100 E3 R75II 3560--4--
0.56 µF 9.0 12.5 18.0 15.0 200 100 E3 R75II 3560--8--
0.68 µF 8.5 14.5 18.0 15.0 200 100 E3 R75II 3680--4--
0.68 µF 13.0 12.0 18.0 15.0 200 100 E3 R75II 3680--8--
0.82 µF 10.0 16.0 18.0 15.0 200 100 E3 R75II 3820--4--
0.82 µF 13.0 12.0 18.0 15.0 200 100 E3 R75II 3820--8--
1.0 µF 10.0 16.0 18.0 15.0 200 100 E3 R75II 4100--4--
1.2 µF 11.0 19.0 18.0 15.0 200 100 E3 R75II 4120--4--
1 section
(250Vdc)
single sided metallized
polypropylene fi lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
Rated
Cap.
250Vdc / 160Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.39 µF 6.0 15.0 26.5 22.5 125 63 E3 R75IN 3390--3--
0.47 µF 6.0 15.0 26.5 22.5 125 63 E3 R75IN 3470--3--
0.56 µF 6.0 15.0 26.5 22.5 125 63 E3 R75IN 3560--4--
0.68 µF 6.0 15.0 26.5 22.5 125 63 E3 R75IN 3680--4--
0.82 µF 7.0 16.0 26.5 22.5 125 63 E3 R75IN 3820--4--
1.0 µF 7.0 16.0 26.5 22.5 125 63 E3 R75IN 4100--4--
1.2 µF 8.5 17.0 26.5 22.5 125 63 E3 R75IN 4120--4--
1.5 µF 10.0 18.5 26.5 22.5 125 63 E3 R75IN 4150--4--
1.8 µF 10.0 18.5 26.5 22.5 125 63 E3 R75IN 4180--4--
2.2 µF 11.0 20.0 26.5 22.5 125 63 E3 R75IN 4220--4--
2.7 µF 13.0 22.0 26.5 22.5 125 63 E3 R75IN 4270--4--
3.3 µF 13.0 22.0 26.5 22.5 125 63 E3 R75IN 4330--4--
1.0 µF 9.0 17.0 32.0 27.5 100 50 E3 R75IR 4100--3--
1.2 µF 9.0 17.0 32.0 27.5 100 50 E3 R75IR 4120--3--
1.5 µF 9.0 17.0 32.0 27.5 100 50 E3 R75IR 4150--4--
1.8 µF 9.0 17.0 32.0 27.5 100 50 E3 R75IR 4180--4--
2.2 µF 11.0 20.0 32.0 27.5 100 50 E3 R75IR 4220--5--
2.7 µF 11.0 20.0 32.0 27.5 100 50 E3 R75IR 4270--4--
3.3 µF 13.0 22.0 32.0 27.5 100 50 E3 R75IR 4330--4--
3.9 µF 13.0 22.0 32.0 27.5 100 50 E3 R75IR 4390--4--
4.7 µF 13.0 25.0 32.0 27.5 100 50 E3 R75IR 4470--5--
5.6 µF 14.0 28.0 32.0 27.5 100 50 E3 R75IR 4560--4--
6.8 µF 18.0 33.0 32.0 27.5 100 50 E3 R75IR 4680--4--
8.2 µF 18.0 33.0 32.0 27.5 100 50 E3 R75IR 4820--4--
10.0 µF 22.0 37.0 32.0 27.5 100 50 E3 R75IR 5100--4--
12.0 µF 22.0 37.0 32.0 27.5 100 50 E3 R75IR 5120--4--
3.3 µF 11.0 22.0 41.5 37.5 40 20 E3 R75IW 4330--4--
3.9 µF 11.0 22.0 41.5 37.5 40 20 E3 R75IW 4390--4--
4.7 µF 11.0 22.0 41.5 37.5 40 20 E3 R75IW 4470--4--
5.6 µF 13.0 24.0 41.5 37.5 40 20 E3 R75IW 4560--4--
6.8 µF 16.0 28.5 41.5 37.5 40 20 E3 R75IW 4680--4--
8.2 µF 16.0 28.5 41.5 37.5 40 20 E3 R75IW 4820--4--
10.0 µF 19.0 32.0 41.5 37.5 40 20 E3 R75IW 5100--4--
12.0 µF 19.0 32.0 41.5 37.5 40 20 E3 R75IW 5120--4--
15.0 µF 20.0 40.0 41.5 37.5 40 20 E3 R75IW 5150--4--
18.0 µF 20.0 40.0 41.5 37.5 40 20 E3 R75IW 5180--4--
22.0 µF 24.0 44.0 41.5 37.5 40 20 E3 R75IW 5220--4--
27.0 µF 24.0 44.0 41.5 37.5 40 20 E3 R75IW 5270--4--
33.0 µF 30.0 45.0 41.5 37.5 40 20 E3 R75IW 5330--4--
10/2006
125
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
1 section
(400Vdc)
single sided metallized
polypropylene fi lm
Rated
Cap.
400Vdc / 220Vac*
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.010 µF 4.0 9.0 10.0 7.5 450 360 E3 R75MD 2100--4--
0.012 µF 4.0 9.0 10.0 7.5 450 360 E3 R75MD 2120--4--
0.015 µF 4.0 9.0 10.0 7.5 450 360 E3 R75MD 2150--4--
0.018 µF 4.0 9.0 10.0 7.5 450 360 E3 R75MD 2180--4--
0.022 µF 4.0 9.0 10.0 7.5 450 360 E3 R75MD 2220--4--
0.027 µF 5.0 10.5 10.0 7.5 450 360 E3 R75MD 2270--4--
0.033 µF 5.0 10.5 10.0 7.5 450 360 E3 R75MD 2330--4--
0.039 µF 6.0 12.0 10.5 7.5 450 360 E3 R75MD 2390--3--
0.047 µF 6.0 12.0 10.5 7.5 450 360 E3 R75MD 2470--3--
0.015 µF 4.0 9.0 13.0 10.0 420 336 E3 R75ΜF 2150--0--
0.018 µF 4.0 9.0 13.0 10.0 420 336 E3 R75ΜF 2180--0--
0.022 µF 4.0 9.0 13.0 10.0 420 336 E3 R75ΜF 2220--3--
0.027 µF 4.0 9.0 13.0 10.0 420 336 E3 R75ΜF 2270--3--
0.033 µF 5.0 11.0 13.0 10.0 420 336 E3 R75ΜF 2330--3--
0.039 µF 5.0 11.0 13.0 10.0 420 336 E3 R75ΜF 2390--3--
0.047 µF 5.0 11.0 13.0 10.0 420 336 E3 R75ΜF 2470--3--
0.056 µF 6.0 12.0 13.0 10.0 420 336 E3 R75ΜF 2560--3--
0.068 µF 6.0 12.0 13.0 10.0 420 336 E3 R75ΜF 2680--3--
0.068 µF 5.0 11.0 18.0 15.0 300 240 E3 R75MI 2680--3--
0.082 µF 5.0 11.0 18.0 15.0 300 240 E3 R75MI 2820--3--
0.10 µF 5.0 11.0 18.0 15.0 300 240 E3 R75MI 3100--3--
0.12 µF 6.0 12.0 18.0 15.0 300 240 E3 R75MI 3120--3--
0.15 µF 6.0 12.0 18.0 15.0 300 240 E3 R75MI 3150--3--
0.18 µF 7.5 13.5 18.0 15.0 300 240 E3 R75MI 3180--3--
0.22 µF 7.5 13.5 18.0 15.0 300 240 E3 R75MI 3220--3--
0.22 µF 9.0 12.5 18.0 15.0 300 240 E3 R75MI 3220--7--
0.27 µF 8.5 14.5 18.0 15.0 300 240 E3 R75MI 3270--3--
0.27 µF 9.0 12.5 18.0 15.0 300 240 E3 R75MI 3270--7--
0.33 µF 10.0 16.0 18.0 15.0 300 240 E3 R75MI 3330--3--
0.33 µF 13.0 12.0 18.0 15.0 300 240 E3 R75MI 3330--7--
0.39 µF 10.0 16.0 18.0 15.0 300 240 E3 R75MI 3390--3--
0.47 µF 10.0 16.0 18.0 15.0 300 240 E3 R75MI 3470--3--
0.56 µF 11.0 19.0 18.0 15.0 300 240 E3 R75MI 3560--3--
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
* Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 183)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
400Vdc / 220Vac*
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.18 µF 6.0 15.0 26.5 22.5 180 144 E3 R75MN 3180--3--
0.22 µF 6.0 15.0 26.5 22.5 180 144 E3 R75MN 3220--3--
0.27 µF 6.0 15.0 26.5 22.5 180 144 E3 R75MN 3270--3--
0.33 µF 6.0 15.0 26.5 22.5 180 144 E3 R75MN 3330--3--
0.39 µF 7.0 16.0 26.5 22.5 180 144 E3 R75MN 3390--3--
0.47 µF 7.0 16.0 26.5 22.5 180 144 E3 R75MN 3470--3--
0.56 µF 8.5 17.0 26.5 22.5 180 144 E3 R75MN 3560--3--
0.68 µF 10.0 18.5 26.5 22.5 180 144 E3 R75MN 3680--3--
0.82 µF 10.0 18.5 26.5 22.5 180 144 E3 R75MN 3820--3--
1.0 µF 11.0 20.0 26.5 22.5 180 144 E3 R75MN 4100--3--
1.2 µF 13.0 22.0 26.5 22.5 180 144 E3 R75MN 4120--3--
1.5 µF 13.0 22.0 26.5 22.5 180 144 E3 R75MN 4150--3--
0.56 µF 9.0 17.0 32.0 27.5 130 104 E3 R75MR 3560--3--
0.68 µF 9.0 17.0 32.0 27.5 130 104 E3 R75MR 3680--3--
0.82 µF 9.0 17.0 32.0 27.5 130 104 E3 R75MR 3820--3--
1.0 µF 11.0 20.0 32.0 27.5 130 104 E3 R75MR 4100--4--
1.2 µF 11.0 20.0 32.0 27.5 130 104 E3 R75MR 4120--3--
1.5 µF 13.0 22.0 32.0 27.5 130 104 E3 R75MR 4150--3--
1.8 µF 13.0 22.0 32.0 27.5 130 104 E3 R75MR 4180--3--
2.2 µF 13.0 25.0 32.0 27.5 130 104 E3 R75MR 4220--4--
2.7 µF 14.0 28.0 32.0 27.5 130 104 E3 R75MR 4270--3--
3.3 µF 18.0 33.0 32.0 27.5 130 104 E3 R75MR 4330--3--
3.9 µF 18.0 33.0 32.0 27.5 130 104 E3 R75MR 4390--3--
4.7 µF 22.0 37.0 32.0 27.5 130 104 E3 R75MR 4470--3--
5.6 µF 22.0 37.0 32.0 27.5 130 104 E3 R75MR 4560--3--
1.2 µF 11.0 22.0 41.5 37.5 70 56 E3 R75MW 4120--3--
1.5 µF 11.0 22.0 41.5 37.5 70 56 E3 R75MW 4150--3--
1.8 µF 11.0 22.0 41.5 37.5 70 56 E3 R75MW 4180--3--
2.2 µF 11.0 22.0 41.5 37.5 70 56 3E R75MW 4220--3--
2.7 µF 13.0 24.0 41.5 37.5 70 56 3E R75MW 4270--3--
3.3 µF 16.0 28.5 41.5 37.5 70 56 3E R75MW 4330--3--
3.9 µF 16.0 28.5 41.5 37.5 70 56 3E R75MW 4390--3--
4.7 µF 19.0 32.0 41.5 37.5 70 56 3E R75MW 4470--3--
5.6 µF 19.0 32.0 41.5 37.5 70 56 3E R75MW 4560--3--
6.8 µF 19.0 32.0 41.5 37.5 70 56 E3 R75MW 4680--3--
8.2 µF 20.0 40.0 41.5 37.5 70 56 E3 R75MW 4820--3--
10.0 µF 20.0 40.0 41.5 37.5 70 56 3E R75MW 5100--4--
12.0 µF 24.0 44.0 41.5 37.5 70 56 3E R75MW 5120--3--
15.0 µF 30.0 45.0 41.5 37.5 70 56 E3 R75MW 5150--3--
10/2006 126
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
1 section
(630Vdc)
single sided metallized
polypropylene fi lm
Rated
Cap.
630Vdc / 250Vac*
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
1000 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1100--4--
1200 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1120--4--
1500 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1150--4--
1800 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1180--4--
2200 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1220--4--
2700 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1270--4--
3300 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1330--4--
3900 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1390--4--
4700 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1470--4--
5600 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1560--4--
6800 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1680--4--
8200 pF 4.0 9.0 10.0 7.5 600 760 E3 R75PD1820--4--
0.010 µF 5.0 10.5 10.0 7.5 600 760 E3 R75PD2100--4--
0.012 µF 5.0 10.5 10.0 7.5 600 760 E3 R75PD2120--4--
0.015 µF 6.0 12.0 10.5 7.5 600 760 E3 R75PD2150--3--
0.018 µF 6.0 12.0 10.5 7.5 600 760 E3 R75PD2180--3--
1000 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1100--0--
1200 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1120--0--
1500 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1150--0--
1800 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1180--0--
2200 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1220--0--
2700 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1270--0--
3300 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1330--0--
3900 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1390--0--
4700 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1470--0--
5600 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1560--0--
6800 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1680--0--
8200 pF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 1820--0--
0.010 µF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 2100--3--
0.012 µF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 2120--3--
0.015 µF 5.0 11.0 13.0 10.0 550 690 E3 R75PF 2150--3--
0.018 µF 5.0 11.0 13.0 10.0 550 690 E3 R75PF 2180--3--
0.022 µF 6.0 12.0 13.0 10.0 550 690 E3 R75PF 2220--3--
0.027 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2270--0--
0.033 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2330--0--
0.039 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2390--3--
0.047 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2470--3--
0.056 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2560--3--
0.068 µF 6.0 12.0 18.0 15.0 400 504 E3 R75PI 2680--3--
0.082 µF 6.0 12.0 18.0 15.0 400 504 E3 R75PI 2820--3--
0.10 µF 7.5 13.5 18.0 15.0 400 504 E3 R75PI 3100--3--
0.10 µF 9.0 12.5 18.0 15.0 400 504 E3 R75PI 3100--7--
0.12 µF 7.5 13.5 18.0 15.0 400 504 E3 R75PI 3120--3--
0.12 µF 9.0 12.5 18.0 15.0 400 504 E3 R75PI 3120--7--
0.15 µF 8.5 14.5 18.0 15.0 400 504 E3 R75PI 3150--3--
0.15 µF 13.0 12.0 18.0 15.0 400 504 E3 R75PI 3150--7--
0.18 µF 10.0 16.0 18.0 15.0 400 504 E3 R75PI 3180--3--
0.18 µF 13.0 12.0 18.0 15.0 400 504 E3 R75PI 3180--7--
0.22 µF 10.0 16.0 18.0 15.0 400 504 E3 R75PI 3220--3--
0.27 µF 11.0 19.0 18.0 15.0 400 504 E3 R75PI 3270--3--
0.33 µF 11.0 19.0 18.0 15.0 400 504 E3 R75PI 3330--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is carried
out at 2 times the above values.
* Not suitable for across-the-line applications. Please
refer to Interference Suppression Capacitors (page
183)
Rated
Cap.
630Vdc / 250Vac*
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.082 µF 6.0 15.0 26.5 22.5 250 315 E3 R75PN 2820--3--
0.10 µF 6.0 15.0 26.5 22.5 250 315 E3 R75PN 3100--3--
0.12 µF 6.0 15.0 26.5 22.5 250 315 E3 R75PN 3120--3--
0.15 µF 6.0 15.0 26.5 22.5 250 315 E3 R75PN 3150--3--
0.18 µF 7.0 16.0 26.5 22.5 250 315 E3 R75PN 3180--3--
0.22 µF 7.0 16.0 26.5 22.5 250 315 E3 R75PN 3220--3--
0.27 µF 8.5 17.0 26.5 22.5 250 315 E3 R75PN 3270--3--
0.33 µF 10.0 18.5 26.5 22.5 250 315 E3 R75PN 3330--3--
0.39 µF 10.0 18.5 26.5 22.5 250 315 E3 R75PN 3390--3--
0.47 µF 11.0 20.0 26.5 22.5 250 315 E3 R75PN 3470--3--
0.56 µF 11.0 20.0 26.5 22.5 250 315 E3 R75PN 3560--3--
0.68 µF 13.0 22.0 26.5 22.5 250 315 E3 R75PN 3680--3--
0.39 µF 9.0 17.0 32.0 27.5 180 227 E3 R75PR 3390--3--
0.47 µF 9.0 17.0 32.0 27.5 180 227 E3 R75PR 3470--4--
0.56 µF 11.0 20.0 32.0 27.5 180 227 E3 R75PR 3560--3--
0.68 µF 11.0 20.0 32.0 27.5 180 227 E3 R75PR 3680--3--
0.82 µF 13.0 22.0 32.0 27.5 180 227 E3 R75PR 3820--3--
1.0 µF 13.0 22.0 32.0 27.5 180 227 E3 R75PR 4100--3--
1.2 µF 14.0 28.0 32.0 27.5 180 227 E3 R75PR 4120--4--
1.5 µF 14.0 28.0 32.0 27.5 180 227 E3 R75PR 4150--3--
1.8 µF 18.0 33.0 32.0 27.5 180 227 E3 R75PR 4180--3--
2.2 µF 18.0 33.0 32.0 27.5 180 227 E3 R75PR 4220--3--
2.7 µF 22.0 37.0 32.0 27.5 180 227 E3 R75PR 4270--3--
3.3 µF 22.0 37.0 32.0 27.5 180 227 E3 R75PR 4330--3--
0.68 µF 11.0 22.0 41.5 37.5 90 113 E3 R75PW 3680--3--
0.82 µF 11.0 22.0 41.5 37.5 90 113 E3 R75PW 3820--3--
1.0 µF 11.0 22.0 41.5 37.5 90 113 E3 R75PW 4100--3--
1.2 µF 13.0 24.0 41.5 37.5 90 113 E3 R75PW 4120--3--
1.5 µF 13.0 24.0 41.5 37.5 90 113 E3 R75PW 4150--3--
1.8 µF 16.0 28.5 41.5 37.5 90 113 E3 R75PW 4180--3--
2.2 µF 16.0 28.5 41.5 37.5 90 113 E3 R75PW 4220--3--
2.7 µF 19.0 32.0 41.5 37.5 90 113 E3 R75PW 4270--3--
3.3 µF 19.0 32.0 41.5 37.5 90 113 E3 R75PW 4330--3--
3.9 µF 19.0 32.0 41.5 37.5 90 113 E3 R75PW 4390--4--
4.7 µF 20.0 40.0 41.5 37.5 90 113 E3 R75PW 4470--3--
5.6 µF 20.0 40.0 41.5 37.5 90 113 E3 R75PW 4560--4--
6.8 µF 24.0 44.0 41.5 37.5 90 113 E3 R75PW 4680--3--
8.2 µF 30.0 45.0 41.5 37.5 90 113 E3 R75PW 4820--3--
10/2006
127
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
1 section
(1000Vdc)
single sided metallized
polypropylene fi lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated voltage
(VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above
value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-
form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the
above values.
Rated
Cap.
1000Vdc / 250Vac*
Std dimensions
Max
dv/dt
Max
K0
Part Number
B H L p (V/µs) (V2µs)
0.012 µF 5.0 11.0 18.0 15.0 450 900 E3 R75QI 2120--0--
0.015 µF 5.0 11.0 18.0 15.0 450 900 E3 R75QI 2150--0--
0.018 µF 5.0 11.0 18.0 15.0 450 900 E3 R75QI 2180--0--
0.022 µF 5.0 11.0 18.0 15.0 450 900 E3 R75QI 2220--0--
0.027 µF 6.0 12.0 18.0 15.0 450 900 E3 R75QI 2270--0--
0.033 µF 6.0 12.0 18.0 15.0 450 900 E3 R75QI 2330--0--
0.039 µF 7.5 13.5 18.0 15.0 450 900 E3 R75QI 2390--0--
0.047 µF 7.5 13.5 18.0 15.0 450 900 E3 R75QI 2470--0--
0.047 µF 9.0 12.5 18.0 15.0 450 900 E3 R75QI 2470--6--
0.056 µF 8.5 14.5 18.0 15.0 450 900 E3 R75QI 2560--0--
0.056 µF 9.0 12.5 18.0 15.0 450 900 E3 R75QI 2560--6--
0.068 µF 8.5 14.5 18.0 15.0 450 900 E3 R75QI 2680--0--
0.068 µF 13.0 12.0 18.0 15.0 450 900 E3 R75QI 2680--6--
0.082 µF 10.0 16.0 18.0 15.0 450 900 E3 R75QI 2820--0--
0.10 µF 11.0 19.0 18.0 15.0 450 900 E3 R75QI 3100--0--
0.047 µF 6.0 15.0 26.5 22.5 300 600 E3 R75QN 2470--0--
0.056 µF 6.0 15.0 26.5 22.5 300 600 E3 R75QN 2560--0--
0.068 µF 6.0 15.0 26.5 22.5 300 600 E3 R75QN 2680--0--
0.082 µF 7.0 16.0 26.5 22.5 300 600 E3 R75QN 2820--0--
0.10 µF 7.0 16.0 26.5 22.5 300 600 E3 R75QN 3100--0--
0.12 µF 8.5 17.0 26.5 22.5 300 600 E3 R75QN 3120--0--
0.15 µF 10.0 18.5 26.5 22.5 300 600 E3 R75QN 3150--0--
0.18 µF 10.0 18.5 26.5 22.5 300 600 E3 R75QN 3180--0--
0.22 µF 11.0 20.0 26.5 22.5 300 600 E3 R75QN 3220--0--
0.15 µF 9.0 17.0 32.0 27.5 200 400 E3 R75QR 3150--0--
0.18 µF 9.0 17.0 32.0 27.5 200 400 E4 R75QR 3180--0--
0.22 µF 11.0 20.0 32.0 27.5 200 400E4 R75QR 3220--1--
0.27 µF 11.0 20.0 32.0 27.5 200 400 E3 R75QR 3270--0--
0.33 µF 13.0 22.0 32.0 27.5 200 400 E3 R75QR 3330--0--
0.39 µF 13.0 22.0 32.0 27.5 200 400 E3 R75QR 3390--0--
0.47 µF 13.0 25.0 32.0 27.5 200 400 E3 R75QR 3470--1--
0.56 µF 14.0 28.0 32.0 27.5 200 400 E3 R75QR 3560--1--
0.68 µF 18.0 33.0 32.0 27.5 200 400 E3 R75QR 3680--0--
0.82 µF 18.0 33.0 32.0 27.5 200 400 E3 R75QR 3820--0--
1.0 µF 18.0 33.0 32.0 27.5 200 400 E3 R75QR 4100--0--
1.2 µF 22.0 37.0 32.0 27.5 200 400 E4 R75QR 4120--0--
1.5 µF 22.0 37.0 32.0 27.5 200 400 E3 R75QR 4150--0--
0.27 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW 3270--0--
0.33 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW 3330--0--
0.39 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW 3390--0--
0.47 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW 3470--0--
0.56 µF 13.0 24.0 41.5 37.5 150 300 E3 R75QW 3560--0--
0.68 µF 13.0 24.0 41.5 37.5 150 300E3 R75QW 3680--0--
0.82 µF 16.0 28.5 41.5 37.5 150 300 E3 R75QW 3820--0--
1.0 µF 16.0 28.5 41.5 37.5 150 300 E3 R75QW 4100--0--
1.2 µF 19.0 32.0 41.5 37.5 150 300 E3 R75QW 4120--0--
1.5 µF 19.0 32.0 41.5 37.5 150 300 E3 R75QW 4150--0--
1.8 µF 20.0 40.0 41.5 37.5 150 300 E3 R75QW 4180--0--
2.2 µF 20.0 40.0 41.5 37.5 150 300 E3 R75QW 4220--0--
2.7 µF 24.0 44.0 41.5 37.5 150 300 E3 R75QW 4270--0--
3.3 µF 30.0 45.0 41.5 37.5 150 300 E3 R75QW 4330--0--
3.9 µF 30.0 45.0 41.5 37.5 150 300 E3 R75QW 4390--0--
Note: * Not suitable for across-the-line applications. Please refer to
Interference Suppression Capacitors (page 183)
3 sections
(1000Vdc/400Vac)
single sided metallized
polypropylene fi lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
1000Vdc / 400Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
220 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0220--3--
270 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0270--3--
330 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0330--3--
390 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0390--3--
470 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0470--3--
560 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0560--3--
680 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0680--3--
820 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 0820--3--
1000 pF 3.0 8.0 10.0 7.5 4000 8.0 E6 R75QD 1100--3--
1200 pF 4.0 9.0 10.0 7.5 4000 8.0 E6 R75QD 1120--3--
1500 pF 4.0 9.0 10.0 7.5 4000 8.0 E6 R75QD 1150--3--
1800 pF 4.0 9.0 10.0 7.5 4000 8.0 E6 R75QD 1180--3--
2200 pF 4.0 9.0 10.0 7.5 4000 8.0 E6 R75QD 1220--3--
2700 pF 4.0 9.0 10.0 7.5 4000 8.0 E6 R75QD 1270--3--
3300 pF 4.0 9.0 10.0 7.5 4000 8.0 E6 R75QD 1330--3--
3900 pF 5.0 10.5 10.0 7.5 4000 8.0 E6 R75QD 1390--3--
4700 pF 5.0 10.5 10.0 7.5 4000 8.0 E6 R75QD 1470--3--
5600 pF 5.0 10.5 10.0 7.5 4000 8.0 E6 R75QD 1560--3--
6800 pF 6.0 12.0 10.5 7.5 4000 8.0 E6 R75QD 1680--3--
8200 pF 6.0 12.0 10.5 7.5 4000 8.0 E6 R75QD 1820--3--
IN PROGRESS
IN PROGRESS
S
S
ES
ES
ES
R
ES
R
R
E
R
G
G
R
O
OG
RO
RO
OG
O
R
RO
O
PR
PR
RO
R
P
PR
R
P
P
PR
P
N
P
P
N
N
P
N
N
QD
75QD 027
R75QD 0330
R75QD 033
R75QD 03
8.0 E68.0 E6
R75QDR75Q
8.0 E6
R
000000
8
.
0
E
68.0 E6
4000
80E
.55
400
04000
88
7.5
4000
0.00
7.
5.5
400400
10.0
7.5
9.09.0
10.
010.0
7.575
0
9.0
10
4.04.0
9
.
09.0
10.0
F
10.5
00
pF
pF
5
.
05.0
10
600
pF
50
00
pF
pF
10/2006 128
R75
MKP Series
HIGH PERFORMANCES METALLIZED
POLYPROPYLENE FILM CAPACITOR D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table.
The dv/dt test is carried out at 2 times the above
values.
single sided metallized
polypropylene fi lm
3 sections
(1250Vdc)-(1600Vdc)
Rated
Cap.
1250Vdc / 600Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
8200 pF 5.0 11.0 18.0 15.0 3300 825 E4 R75RI 1820--3--
0.010 µF 5.0 11.0 18.0 15.0 3300 825 E4 R75RI 2100--3--
0.012 µF 6.0 12.0 18.0 15.0 3300 825 E4 R75RI 2120--3--
0.015 µF 6.0 12.0 18.0 15.0 3300 825 E4 R75RI 2150--3--
0.018 µF 7.5 13.5 18.0 15.0 3300 825 E4 R75RI 2180--3--
0.022 µF 7.5 13.5 18.0 15.0 3300 825 E4 R75RI 2220--3--
0.022 µF 9.0 12.5 18.0 15.0 3300 825 E4 R75RI 2220--7--
0.027 µF 8.5 14.5 18.0 15.0 3300 825 E4 R75RI 2270--3--
0.027 µF 13.0 12.0 18.0 15.0 3300 825 E4 R75RI 2270--7--
0.033 µF 10.0 16.0 18.0 15.0 3300 825 E4 R75RI 2330--3--
0.033 µF 13.0 12.0 18.0 15.0 3300 825 E4 R75RI 2330--7--
0.039 µF 10.0 16.0 18.0 15.0 3300 825 E4 R75RI 2390--3--
0.047 µF 11.0 19.0 18.0 15.0 3300 825 E4 R75RI 2470--3--
0.056 µF 11.0 19.0 18.0 15.0 3300 825 E4 R75RI 2560--3--
0.033 µF 6.0 15.0 26.5 22.5 2100 525 E4 R75RN 2330--3--
0.039 µF 6.0 15.0 26.5 22.5 2100 525 E4 R75RN 2390--3--
0.047 µF 7.0 16.0 26.5 22.5 2100 525 E4 R75RN 2470--3--
0.056 µF 7.0 16.0 26.5 22.5 2100 525 E4 R75RN 2560--3--
0.068 µF 8.5 17.0 26.5 22.5 2100 525 E4 R75RN 2680--3--
0.082 µF 10.0 18.5 26.5 22.5 2100 525 E4 R75RN 2820--3--
0.10 µF 10.0 18.5 26.5 22.5 2100 525 E4 R75RN 3100--3--
0.12 µF 11.0 20.0 26.5 22.5 2100 525 E4 R75RN 3120--3--
0.15 µF 13.0 22.0 26.5 22.5 2100 525 E4 R75RN 3150--3--
0.10 µF 9.0 17.0 32.0 27.5 500 125 E4 R75RR 3100--4--
0.12 µF 9.0 17.0 32.0 27.5 500 125 E4 R75RR 3120--4--
0.15 µF 11.0 20.0 32.0 27.5 500 125 E4 R75RR 3150--4--
0.18 µF 11.0 20.0 32.0 27.5 500 125 E4 R75RR 3180--4--
0.22 µF 13.0 22.0 32.0 27.5 500 125 E4 R75RR 3220--4--
0.27 µF 13.0 25.0 32.0 27.5 500 125 E4 R75RR 3270--4--
0.33 µF 13.0 25.0 32.0 27.5 500 125 E4 R75RR 3330--4--
0.39 µF 18.0 33.0 32.0 27.5 500 125 E4 R75RR 3390--4--
0.47 µF 18.0 33.0 32.0 27.5 500 125 E4 R75RR 3470--4--
0.56 µF 18.0 33.0 32.0 27.5 500 125 E4 R75RR 3560--4--
0.68 µF 22.0 37.0 32.0 27.5 500 125 E4 R75RR 3680--4--
0.82 µF 22.0 37.0 32.0 27.5 500 125 E4 R75RR 3820--4--
0.27 µF 11.0 22.0 41.5 37.5 360 125 E4 R75RW 3270--3--
0.33 µF 11.0 22.0 41.5 37.5 360 125 E4 R75RW 3330--3--
0.39 µF 13.0 24.0 41.5 37.5 360 125 E4 R75RW 3390--3--
0.47 µF 13.0 24.0 41.5 37.5 360 125 E4 R75RW 3470--4--
0.56 µF 16.0 28.5 41.5 37.5 360 125 E4 R75RW 3560--4--
0.68 µF 16.0 28.5 41.5 37.5 360 125 E4 R75RW 3680--4--
0.82 µF 19.0 32.0 41.5 37.5 360 125 E4 R75RW 3820--4--
1.0 µF 20.0 40.0 41.5 37.5 360 125 E4 R75RW 4100--3--
1.2 µF 20.0 40.0 41.5 37.5 360 125 E4 R75RW 4120--4--
1.5 µF 24.0 44.0 41.5 37.5 360 125 E4 R75RW 4150--4--
1.8 µF 24.0 44.0 41.5 37.5 360 125 E4 R75RW 4180--3--
2.2 µF 30.0 45.0 41.5 37.5 360 125 E4 R75RW 4220--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
1600Vdc / 650Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
3900 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R75TI 1390--3--
4700 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R75TI 1470--3--
5600 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R75TI 1560--3--
6800 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R75TI 1680--3--
8200 pF 6.0 12.0 18.0 15.0 6000 1900 E4 R75TI 1820--3--
0.010 µF 6.0 12.0 18.0 15.0 6000 1900 E4 R75TI 2100--3--
0.012 µF 7.5 13.5 18.0 15.0 6000 1900 E4 R75TI 2120--3--
0.015 µF 7.5 13.5 18.0 15.0 6000 1900 E4 R75TI 2150--3--
0.018 µF 8.5 14.5 18.0 15.0 6000 1900 E4 R75TI 2180--3--
0.018 µF 9.0 12.5 18.0 15.0 6000 1900 E4 R75TI 2180--7--
0.022 µF 10.0 16.0 18.0 15.0 6000 1900 E4 R75TI 2220--3--
0.022 µF 13.0 12.0 18.0 15.0 6000 1900 E4 R75TI 2220--7--
0.027 µF 10.0 16.0 18.0 15.0 6000 1900 E4 R75TI 2270--3--
0.033 µF 11.0 19.0 18.0 15.0 6000 1900 E4 R75TI 2330--3--
0.027 µF 6.0 15.0 26.5 22.5 3000 960 E4 R75TN 2270--3--
0.033 µF 7.0 16.0 26.5 22.5 3000 960 E4 R75TN 2330--3--
0.039 µF 7.0 16.0 26.5 22.5 3000 960 E4 R75TN 2390--3--
0.047 µF 8.5 17.0 26.5 22.5 3000 960 E4 R75TN 2470--3--
0.056 µF 10.0 18.5 26.5 22.5 3000 960 E4 R75TN 2560--3--
0.068 µF 10.0 18.5 26.5 22.5 3000 960 E4 R75TN 2680--3--
0.082 µF 11.0 20.0 26.5 22.5 3000 960 E4 R75TN 2820--3--
0.10 µF 13.0 22.0 26.5 22.5 3000 960 E4 R75TN 3100--3--
0.12 µF 13.0 22.0 26.5 22.5 3000 960 E4 R75TN 3120--3--
0.068 µF 9.0 17.0 32.0 27.5 1500 480 E4 R75TR 2680--3--
0.082 µF 9.0 17.0 32.0 27.5 1500 480 E4 R75TR 2820--3--
0.10 µF 11.0 20.0 32.0 27.5 1500 480 E4 R75TR 3100--4--
0.12 µF 11.0 20.0 32.0 27.5 1500 480 E4 R75TR 3120--3--
0.15 µF 13.0 22.0 32.0 27.5 1500 480 E4 R75TR 3150--3--
0.18 µF 13.0 22.0 32.0 27.5 1500 480 E4 R75TR 3180--3--
0.22 µF 13.0 25.0 32.0 27.5 1500 480 E4 R75TR 3220--4--
0.27 µF 18.0 33.0 32.0 27.5 1500 480 E4 R75TR 3270--3--
0.33 µF 18.0 33.0 32.0 27.5 1500 480 E4 R75TR 3330--3--
0.39 µF 18.0 33.0 32.0 27.5 1500 480 E4 R75TR 3390--3--
0.47 µF 22.0 37.0 32.0 27.5 1500 480 E4 R75TR 3470--3--
0.56 µF 22.0 37.0 32.0 27.5 1500 480 E4 R75TR 3560--3--
0.18 µF 11.0 22.0 41.5 37.5 750 240 E4 R75TW 3180--3--
0.22 µF 11.0 22.0 41.5 37.5 750 240 E4 R75TW 3220--3--
0.27 µF 13.0 24.0 41.5 37.5 750 240 E4 R75TW 3270--3--
0.33 µF 16.0 28.5 41.5 37.5 750 240 E4 R75TW 3330--3--
0.39 µF 16.0 28.5 41.5 37.5 750 240 E4 R75TW 3390--3--
0.47 µF 16.0 28.5 41.5 37.5 750 240 E4 R75TW 3470--3--
0.56 µF 19.0 32.0 41.5 37.5 750 240 E4 R75TW 3560--3--
0.68 µF 19.0 32.0 41.5 37.5 750 240 E4 R75TW 3680--3--
0.82 µF 20.0 40.0 41.5 37.5 750 240 E4 R75TW 3820--3--
1.0 µF 24.0 44.0 41.5 37.5 750 240 E4 R75TW 4100--3--
1.2 µF 24.0 44.0 41.5 37.5 750 240 E4 R75TW 4120--3--
1.5 µF 30.0 45.0 41.5 37.5 750 240 E4 R75TW 4150--3--
10/2006
129
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
3 sections
(2000Vdc)
single sided metallized
polypropylene fi lm
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table.
The dv/dt test is carried out at 2 times the above
values.
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
2000Vdc / 700Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
1000 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R75UI 1100--4--
1200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R75UI 1120--4--
1500 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R75UI 1150--4--
1800 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R75UI 1180--4--
2200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R75UI 1220--4--
2700 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R75UI 1270--4--
3300 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R75UI 1330--4--
3900 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R75UI 1390--3--
4700 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R75UI 1470--3--
5600 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R75UI 1560--3--
6800 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R75UI 1680--3--
8200 pF 7.5 13.5 18.0 15.0 9500 3800 E4 R75UI 1820--3--
0.010 µF 7.5 13.5 18.0 15.0 9500 3800 E4 R75UI 2100--3--
0.012 µF 8.5 14.5 18.0 15.0 9500 3800 E4 R75UI 2120--3--
0.012 µF 9.0 12.5 18.0 15.0 9500 3800 E4 R75UI 2120--7--
0.015 µF 8.5 14.5 18.0 15.0 9500 3800 E4 R75UI 2150--3--
0.015 µF 13.0 12.0 18.0 15.0 9500 3800 E4 R75UI 2150--7--
0.018 µF 10.0 16.0 18.0 15.0 9500 3800 E4 R75UI 2180--3--
0.018 µF 13.0 12.0 18.0 15.0 9500 3800 E4 R75UI 2180--7--
0.022 µF 11.0 19.0 18.0 15.0 9500 3800 E4 R75UI 2220--3--
0.027 µF 11.0 19.0 18.0 15.0 9500 3800 E4 R75UI 2270--3--
4700 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 1470--3--
5600 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 1560--3--
6800 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 1680--3--
8200 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 1820--3--
0.010 µF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 2100--3--
0.012 µF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 2120--3--
0.015 µF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 2150--3--
0.018 µF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 2180--3--
0.022 µF 6.0 15.0 26.5 22.5 3500 1400 E4 R75UN 2220--3--
0.027 µF 7.0 16.0 26.5 22.5 3500 1400 E4 R75UN 2270--3--
0.033 µF 8.5 17.0 26.5 22.5 3500 1400 E4 R75UN 2330--3--
0.039 µF 10.0 18.5 26.5 22.5 3500 1400 E4 R75UN 2390--3--
0.047 µF 10.0 18.5 26.5 22.5 3500 1400 E4 R75UN 2470--3--
0.056 µF 11.0 20.0 26.5 22.5 3500 1400 E4 R75UN 2560--3--
0.068 µF 13.0 22.0 26.5 22.5 3500 1400 E4 R75UN 2680--3--
0.047 µF 9.0 17.0 32.0 27.5 1000 400 E4 R75UR 2470--3--
0.056 µF 9.0 17.0 32.0 27.5 1000 400 E4 R75UR 2560--3--
0.068 µF 9.0 17.0 32.0 27.5 1000 400 E4 R75UR 2680--4--
0.082 µF 11.0 20.0 32.0 27.5 1000 400 E4 R75UR 2820--4--
0.10 µF 11.0 20.0 32.0 27.5 1000 400 E4 R75UR 3100--3--
0.12 µF 13.0 22.0 32.0 27.5 1000 400 E4 R75UR 3120--3--
0.15 µF 13.0 25.0 32.0 27.5 1000 400 E4 R75UR 3150--4--
0.18 µF 14.0 28.0 32.0 27.5 1000 400 E4 R75UR 3180--3--
0.22 µF 14.0 28.0 32.0 27.5 1000 400 E4 R75UR 3220--4--
0.27 µF 18.0 33.0 32.0 27.5 1000 400 E4 R75UR 3270--3--
0.33 µF 18.0 33.0 32.0 27.5 1000 400 E4 R75UR 3330--4--
0.39 µF 22.0 37.0 32.0 27.5 1000 400 E4 R75UR 3390--3--
0.47 µF 22.0 37.0 32.0 27.5 1000 400 E4 R75UR 3470--4--
0.15 µF 11.0 22.0 41.5 37.5 500 200 E4 R75UW 3150--3--
0.18 µF 13.0 24.0 41.5 37.5 500 200 E4 R75UW 3180--3--
0.22 µF 13.0 24.0 41.5 37.5 500 200 E4 R75UW 3220--3--
0.27 µF 16.0 28.5 41.5 37.5 500 200 E4 R75UW 3270--3--
0.33 µF 16.0 28.5 41.5 37.5 500 200 E4 R75UW 3330--3--
0.39 µF 19.0 32.0 41.5 37.5 500 200 E4 R75UW 3390--3--
0.47 µF 19.0 32.0 41.5 37.5 500 200 E4 R75UW 3470--3--
0.56 µF 20.0 40.0 41.5 37.5 500 200 E4 R75UW 3560--4--
0.68 µF 20.0 40.0 41.5 37.5 500 200 E4 R75UW 3680--3--
0.82 µF 24.0 44.0 41.5 37.5 500 200 E4 R75UW3820--4--
0.1 µF 24.0 44.0 41.5 37.5 500 200 E4 R75UW3100--3--
10/2006 130
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C±2°C
Test duration: 2000 h
Voltage applied: 1.25xVR
Performance
Capacitance change |∆C/C|: ≤3%
DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF
≤10x10-4 at 01kHz for C>1µF
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤1%
DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF
≤10x10-4 at 01kHz for C>1µF
Insulation resistance: ≥initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12)
Performance
Capacitance change |∆C/C|: ≤0.5%
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
160Vdc - 250Vdc - 400Vdc - 630Vdc -1000Vdc
for 1 section.
1250Vdc - 1600Vdc - 2000Vdc
for 3 sections.
Rated temperature (TR): +85°C
Temperature derated voltage:
The following decreasing factor has to be applied on the
rated voltage:
+85°C to +105°C: 2.00% per °C for VR (d.c.)
+85°C to +105°C: 1.25% per °C for VR (a.c.)
Capacitance range:
1000 pF to 33µF for 1 section.
1000 pF to 2.2µF for 3 sections.
Capacitance values:
E12 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K); ±20% (M).
Total self-inductance (L): (Lead length ~2 mm)
Pitch (mm) 7.5 10 15 22.5 27.5 37.5
L (nH) ≈ 8 9 10 18 18 20
Dissipation factor (DF):
tgδx10-4 at +25°C±5°C
kHz C≤0.1µF0.1<C≤1.0µF1<C≤4.7µF C>4.7µF
1
10
100
≤04
≤06
≤25
≤5
≤8
≤6≤10
Insulation resistance:
Test conditions
Temperature: +25±C°5°C
Voltage charge time: 1min
Voltage charge: 100Vdc
Performance
≥1x105 MΩ for C≤0.33µF (5x105 MΩ)*
≥30000 s for C >0.33µF (150000 s)*
* Typical value.
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C
10/2006
131
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
Note: p (pitch) in mm.
10/2006 132
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
Note: p (pitch) in mm.