One and Four Element LED Arrays LTL-5x3-14 Series LTL-5x3-11 Series Features Package Dimensions Designed for ease in circuit board assembly. Black case enhances contrast ratio. Designed to allow for high density packaging. Single package provides 4-line status indications. Solid state light source. Wide viewing angle. High reliability Life measured in years. LTL-5x3-11 Series Applications Circuit board indicator. Panel illumination. Logic status indicator. Binary data display Permits stacking so that multiple functions can be displayed. Position indicator. LTL-5x3-14 Series Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm (.010") unless otherwise noted. 3. The holder color is black only. Devices Part No. LTL- 7-126 Lens Source Color 503-11 503-14 Red Diffused 533-11 533-14 Green Diffused Green 553-11 553-14 Yellow Diffused Yellow Red Absolute Maximum Ratings at Ta=25 LTL503-11 503-14 LTL533-11 533-14 LTL553-11 553-14 Unit Power Dissipation 80 100 60 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 200 120 80 mA Continuous Forward Current 40 30 20 Derating Linear From 50 0.5 0.4 0.25 5 5 Reverse Voltage 5 Operating Temperature Range -55 to +100 Storage Temperature Range -55 to +100 Lead Soldering Temperature [1.6mm (.063 in.) from body] 260 mA mA/ V for 5 Seconds THROUGH HOLE LAMPS Parameter 7-127 Electrical/Optical Characteristics at Ta=25 Parameter Symbol Part No. LTL- Min. Typ. IV 503-11/-14 533-11/-14 553-11/-14 0.4 12.6 3.7 Luminous lntensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Unit. Test Condition. 1.1 40 12.6 mcd I F=10 mA Note 1,4 503-11/-14 533-11/-14 553-11/-14 60 deg Note 2 (Fig.6) P 503-11/-14 533-11/-14 553-11/-14 655 565 585 nm Measurement @Peak (Fig.1) d 503-11/-14 533-11/-14 553-11/-14 651 569 588 nm Note 3 503-11/-14 533-11/-14 553-11/-14 24 30 35 nm 1.7 2.1 2.1 2 Spectral Line Half Width Forward Voltage VF 503-11/-14 533-11/-14 553-11/-14 Reverse Current IR 503-11/-14 533-11/-14 553-11/-14 Capacitance C 503-11/-14 533-11/-14 553-11/-14 Max. 2.0 2.6 2.6 100 30 35 15 V A pF IF=20mA VR=5V V F=0 , f=1MHz Notes:1.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eyeresponse curve. 2. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3.The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. I V need 7-128 15% additionary for guaranteed limits. THROUGH HOLE LAMPS Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 7-129