To our custo mers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corpor ation took over all the business of both
companies. Therefore, althoug h the old company name remains in t his document, it is a valid
Renesas Electronics document. W e appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electr onics Corporat ion (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume an y liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liabil ity whatso ever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified acco rding to the following three quality grades: “Standard”, “High Qu ality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic app liances; machine tool s; p ersonal electron i c equipment; and indust r ial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equ ipment; submersible repeaters; nuclear reactor control systems; medical equi pment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific chara cterist ics such as the o ccurren ce of failure at a certai n rate and mal functi on s under certai n u se cond itions. Further,
Renesas Electronics pr oducts are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sal es office for details as to environmental matters such as t he environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Ren esas E lectro nics Corpor ation and also inclu des its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
REJ03G0986-0300 Rev.3.00 Ma y 13, 2009
Page 1 of 6
2SK1947
Silicon N Channel MOS FET REJ03G0986-0300
Rev.3.00
May 13, 2009
Application
High speed power switching
Features
• Low on-resistance
• High speed switching
• Low drive current
• Built-in fast recovery diode (trr = 140 ns)
• Suitable for switching regulator, motor control
Outline
RENESAS Package code: PRSS0004ZF-A
(Package name: TO-3PL)
1. Gate
2. Drain
(Flange)
3. Source
D
G
S
123
Absolute Maximum Ratings
(Ta = 25°C)
Item Symbol Ratings Unit
Drain to source voltage VDSS 250 V
Gate to source voltage VGSS ±30 V
Drain current ID 50 A
Drain peak current ID(pulse)*1 200 A
Body to drain diode reverse drain current IDR 50 A
Channel dissipation Pch*2 200 W
Channel temperature Tch 150 °C
Storage temperature Tstg –55 to +150 °C
Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1 %
2. Value at Tc = 25°C
2SK1947
REJ03G0986-0300 Rev.3.00 Ma y 13, 2009
Page 2 of 6
Electrical Characteristics
(Ta = 25°C)
Item Symbol Min Typ Max Unit Test conditions
Drain to source breakdown voltage V(BR)DSS 250 — — V ID = 10 mA, VGS = 0
Gate to source breakdown voltage V(BR)GSS ±30 — — V IG = ±100 µA, VDS = 0
Gate to source leak current IGSS — — ±10 µA VGS = ±25 V, VDS = 0
Zero gate voltage drain current IDSS — — 250 µA VDS = 200 V, VGS = 0
Gate to source cutoff voltage VGS(off) 2.0 — 3.0 V ID = 1 mA, VDS = 10 V
Static drain to source on state
resistance RDS(on) — 0.047 0.06 Ω I
D = 25 A, VGS = 10 V*3
Forward transfer admittance |yfs| 20 30 — S ID = 25 A, VDS = 10 V*3
Input capacitance Ciss — 5810 — pF
Output capacitance Coss — 2360 — pF
Reverse transfer capacitance Crss — 270 — pF
VDS = 10 V, VGS = 0,
f = 1 MHz
Turn-on delay time td(on) — 75 — ns
Rise time tr — 270 — ns
Turn-off delay time td(off) — 420 — ns
Fall time tf — 200 — ns
ID = 25 A, VGS = 10 V,
RL = 1.2 Ω
Body to drain diode forward voltage VDF — 1.2 — V IF = 50 A, VGS = 0
Body to drain diode reverse
recovery time trr — 140 — ns
IF = 50 A, VGS = 0,
diF/dt = 100 A/µs
Note: 3. Pulse Test
2SK1947
REJ03G0986-0300 Rev.3.00 Ma y 13, 2009
Page 3 of 6
Main Characteristics
Power vs. Temperature Derating
Channel Dissipation Pch (W)
Case Temperature TC (°C)
Maximum Safe Operation Area
Drain to Source Voltage VDS (V)
Drain Current ID (A)
Typical Output Characteristics
Drain Current ID (A)
Drain to Source Voltage VDS (V)
Typical Transfer Characteristics
Gate to Source Voltage VGS (V)
Drain Current ID (A)
Gate to Source Voltage VGS (V)
Drain to Source Saturation Voltage
vs. Gate to Source Voltage
Drain to Source Saturation Voltage
VDS (on) (V)
Drain Current ID (A)
Static Drain to Source on State
Resistance vs. Drain Current
Static Drain to Source on State Resistance
RDS (on) (Ω)
300
200
100
50 100 150
0
1 ms
PW = 10 ms (1 shot)
100 s
µ
10 s
µ
Operation in this
area is limited
by R (on)
DS
1000
300
100
30
10
3
1
1 3 10 30 100 300 1000
Ta = 25°C
0.3
0.1
DC Operation (Tc = 25 C)
100
80
60
40
20
GS
V = 3.5 V
5.5 V
4 8 12 16 20
0
4 V
5 V
6 V
8 V10 V
DS
V = 10 V
Pulse Test
Tc = 25°C
50
40
30
20
10
246810
–25°C
75°C
0
Pulse Test
0481216
20
5
4
3
2
1
I = 10 A
D
20 A
50 A V = 10 V
GS
5 10 20 50 100 200
0.2
0.1
0.05
0.02
0.01
0.005
0.5
2
Pulse Test
2SK1947
REJ03G0986-0300 Rev.3.00 Ma y 13, 2009
Page 4 of 6
Case Temperature T
C
(°C)
Static Drain to Source on State
Resistance vs. Temperature
Static Drain to Source on State Resistance
R
DS (on)
(Ω)
Forward Transfer Admittance
vs. Drain Current
Drain Current I
D
(A)
Forward Transfer Admittance yfs (S)
Body to Drain Diode Reverse
Recovery Time
Reverse Drain Current I
DR
(A)
Reverse Recovery Time trr (ns)
Typical Capacitance
vs. Drain to Source Voltage
Drain to Source Voltage V
DS
(V)
Capacitance C (pF)
Dynamic Input Characteristics
Gate Charge Qg (nC)
Drain to Source Voltage V
DS
(V)
Gate to Source Voltage V
GS
(V)
Switching Characteristics
Switching Time t (ns)
Drain Current I
D
(A)
0.20
0.16
0.12
0.08
0.04
0
I = 50 A
D
–40 0 80 12040
Pulse Test
V = 10 V
160
GS
10 A, 20 A
Tc = 25°C
75°C
100
50
20
10
5
2
1
–25°C
Pulse Test
V = 10 V
DS
0.5 1 2 5 10 20 50
500
1 2 5 10 20 50 100
di/dt = 100 A/ s
V = 0, Ta = 25°C
GS
µ
200
100
50
20
10
5
10000
1000
100
10
Ciss
Coss
Crss
V = 0
f = 1 MHz
GS
0 1020304050
500
400
300
200
100
20
16
12
8
4
0
I = 50 A
D
V = 200 V
100 V
50 V
DD
80 160 240 320 400
V = 200 V
100 V
50 V
DD
V
DS
0
V
GS
tt
1000
500
200
100
50
20
10
0.5 1 2 5 10 20 50
fr
V
GS
= 10 V, V
DD
= 30 V
PW = 2 µs, duty ≤ 1 %
td(off)
td(on)
2SK1947
REJ03G0986-0300 Rev.3.00 Ma y 13, 2009
Page 5 of 6
Reverse Drain Current vs.
Source to Drain Voltage
Source to Drain Voltage VSD (V)
Reverse Drain Current IDR (A)
Pulse Width PW (S)
Normalized Transient Thermal Impedance vs. Pulse Width
Normalized Transient Thermal Impedance γS (t)
Switching Time Test Circuit Waveforms
50
40
30
20
10
0.4 0.8 1.2 1.6 2.0
GS
Pulse Test
V = 10 V
0, –5 V
0
TC = 25°C
D = 1
0.5
0.2
0.1
0.05
0.02
0.01
1 Shot Pulse
TPW
PDM
D = T
PW
θch–c (t) = γS (t) · θch–c
θch–c = 0.625°C/W, TC = 25°C
3
1
0.1
0.3
10 µ
0.03
0.01
100 µ10 m 100 m 1 10
1 m
Vin Monitor
Vin
10 V 50 Ω
D.U.T.
Vout Monitor
R
L
V
DD
30 V
=
..
Vin
t
d
(on)
10%
t
r
90%
Vout 10%
90% 90%
t
f
t
d
(off)
10%
2SK1947
REJ03G0986-0300 Rev.3.00 Ma y 13, 2009
Page 6 of 6
Package Dimensions
20.0 ± 0.3
φ3.3 ± 0.2
1.4
2.2
3.0
1.2
5.45 ± 0.5
5.45 ± 0.5
1.0
3.8
7.4
2.8 ± 0.2
0.6
5.0 ± 0.2
6.0 ± 0.2
26.0 ± 0.3
20.0 ± 0.6
2.5 ± 0.3
+0.25
–0.1
+0.25
–0.1
Previous Code
PRSS0004ZF-A TO-3PL / TO-3PLV
MASS[Typ.]
9.9g
RENESAS CodeJEITA Package Code
Unit: mm
Package Name
TO-3PL
Ordering Information
Part Name Quantity Shipping Container
2SK1947-E 250 pcs Box (Tube)
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
RENESAS SALES OFFICES
© 2009. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2
