© 2005 Microchip Technology Inc. Advance Information DS41272B-page 1
PIC12F615/12HV615
PIC16F616/16HV616
High-Performance RISC CPU:
Only 35 single-word instructions to learn
All single-cycle instructions except for program
branches which are two-cycle
Eight-level deep hardware stack
Direct, Indirect and Relative Addressing modes
for data and instructions
Operati ng spe ed:
- DC – 20 MHz clock input
- DC – 200 ns instruction cycle
Special Microcontroller Features:
Precision Internal Oscillator:
- Selectable 4 MHz or 8 MHz frequency
- Factory calibrated to ±1%
Power-Saving Sleep mode
Power-on Reset (POR)
Power-up Timer (PWRT) and Oscillator Start-up
Timer (OST)
Brown-out Reset (BOR)
Watchdog Timer (WDT) with dedicated on-chip
RC oscillator for reliable operation
Multiplexed MCLR input pin with i nternal pull-up
Programmable code protection
Selectable oscillator options:
- INTOSC: Precision internal oscillator
- EXTRC: External low-cost RC oscillator
- XT: Standard crystal/resonator
- HS: High-speed crystal/resonator
- LP: Power-saving, low frequ ency crystal
- EC: High-speed extern al clo ck inpu t
In-Circuit Serial Programming (ICSP)
In-Circuit Debugging (ICD) support
Programmable Interrupt-on-Change pins
Low-Power Features/CMOS Technology:
Operati ng curr ent:
-100μA @ 2V, 1 MHz, typical
Standby current:
- 1 nA @ 2V, typical
Low-power, high-speed Flash technology:
- 100,000 F lash endurance
- > 40-year retention
Fully static design
Wide operating voltage range:
- 2.0 V-5.5V for P IC12 F615 and P IC1 6F616
- 2.0V – user defined maximum voltage for
PIC12HV615 and PIC16HV616
Wide temperature range:
- Industrial: -40°C to +85°C
- Extended: -40°C to +125°C
Peripheral Feat ures:
I/O pins:
- 5 I/O pins with individual direction control
(PIC12F615, PIC12HV615)
- 11 I/O pins with indiv idu al dire ction control
(PIC16F616, PIC16HV616)
- 1 in put only pin
- Individually selectable weak pull-ups
- High current sink/source for direct LED drive
Analog-to-Digital (A/D) Converter:
- 10-bit resolution
- 4 external channels (PIC12F615,
PIC12HV615)
- 8 external channels (PIC16F616,
PIC16HV616)
- 3 internal ch annels to co nvert internal v oltage
references
Analog Comparator:
- One comparator (PIC12F615, PIC12HV615)
- Tw o comparators (PI C16F616,
PIC16HV616)
- Comparator inputs and output accessible
externally
- On-chip 0.6V absolute voltage reference
- Programmable on-chip voltage reference
(CVREF) module (% of VDD)
Timer0 module: 8-bit timer/counter with 8-bit
progra mmab le pres caler
Enhanced Timer1 module:
- 16-bit timer/counter with prescaler
- External gate input
- Option to use OSC1/OSC2 input in LP mode
as Timer1 oscillator when in INTOSC mode
- Option to use system cl ock s ource as T im er1
clock input
- Timer2 module: 8-bit timer/counter with 8-bit
prescaler and postscaler
8/14-Pin, 8-Bit Flash Microcontroller Product Brief
PIC12F615/12HV615 PIC16F616/16HV616
DS41272B-page 2 Advance Information © 2005 Microchip Technology Inc.
Enhanced Capture Compare/PWM module
(ECCP):
- 16-bit capture maximum resolution 12.5 ns
- Compare maximum resolution 200 ns
- 10-bit PWM maximum frequency 20 kHz
- User selectable PWM output on primary or
alternate pins. (Alternate pi n selection
PIC12HV615 only)
FIGURE 1: PIN DIAGRAMS
Device
Program Memory Data
Memory I/O Timers
8/16 bit 10-bit A/D
Channels Comparators Voltage
Regulator
Flash Words SRAM
(bytes)
PIC12F615 1024 x 14 64 6 2/1 4 1 N
PIC16F616 2048 x 14 128 12 2/1 8 2 N
PIC12HV615 1024 x 14 64 6 2/1 4 1 Y
PIC16HV616 2048 x 14 128 12 2/1 8 2 Y
PIC16F616
PDIP, SOIC, TSSOP, QFN
1
2
3
4
5
6
7
VDD
RA5/T1CKIN/OSC1/CLKIN
RA4/AN3/T1G/OSC2
RA3/MCLR/VPP
RC5/CCP1/P1A
RC4/C2OUT/P1B
RC3/AN7/P1C
VSS
RA0/AN0/C1IN+/ICSPDAT
RA1/AN1/C1IN-/VREF/ICSPCLK
RA2/AN2/T0CKI/INT/C1OUT
RC0/AN4/C2IN+
RC1/AN5/C2IN-
RC2/AN6/P1D
14
13
12
11
10
9
8
PDIP/SOIC
PIC12F615
1
2
3
4
VDD
GP5/CLKIN/P1A(1)/T1CKIN/OSC1
GP4/AN3/T1G/P1B(1)/OSC2
GP3/T1G(1)/MCLR/VPP
VSS
GP0/AN0/C1IN+/P1B/ICSPDAT
GP1/AN1/C1IN-/VREF/ICSPCLK
GP2/AN2/T0CKI/INT/C1OUT/CCP1/P1A
8
7
6
5
Note 1: Alternate pin function.
2: Reference DIP package for complete pin descriptions.
PIC16F616
1
2
3
4567
VDD
RA5
RA4
RA3
RC5
RC4
RC3
RA0
RA1
RA2
RC0
RC1
RC2
14 13
12
11
10
9
8
15
16
QFN(2)
NC
NC
GND
© 2005 Microchip Technology Inc. Advance Information DS41272B-page 3
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR WAR-
RANTIES OF ANY KIN D WHETHER EXPRESS OR IMPLIED ,
WRITTEN OR ORAL, STATUTORY OR OTHERWISE,
RELATED TO THE INFORMATION, INCLUDING BUT NOT
LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR PURPOSE.
Microchip disclaims all liability arising from this information and
its use. U se of Microc hip’s products as critical com ponents in
life support systems is not authorized except with express
written approval by Microchip. No licenses are conveyed,
implicitly or otherwise, under any Microchip intellectual property
rights.
Trademarks
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICST ART ,
PRO MATE, PowerSmart, rfPIC, and SmartShunt are
registered trademarks of Microchip Technology Incorporated
in the U.S.A. and other countries.
AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB,
PICMASTER, SEEVAL, SmartSensor and The Embedded
Control Solutions Company are registered trademarks of
Microchip Technology In corporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, dsPICDEM,
dsPICDEM.net, dsPICworks, EC AN, ECONOMONITOR,
FanSense, FlexROM, fuzzyLAB, In-Circuit Serial
Programming, ICSP, ICEPI C, Linear Active Thermist or,
MPA SM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM,
PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo,
PowerMate, Powe rTool, Real ICE, rfLAB, rfPICDE M, Sele ct
Mode, Smart Serial, SmartTel, Total Endurance, UNI/O,
WiperLock and Zena are trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2005, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Note the following details of the code protection feature on Microchip devices:
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that it s family of products is one of the most secure families of it s kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.
Code protection is c onstantly evolving. We a t Microchip are commit ted to continuously improving the code protect ion featur es of our
products. Attempts to break Microchip’ s code protection f eature may be a violati on of t he Digit al Millennium Copyright Act. If such act s
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2002 quality system certification for
its worldwide headquarters, design and wafer fabrication facilities in
Chandler and Tempe, Arizona and Mountain View , California in
October 2003. The Company’s quality system processes and
procedures are for its PICmicro® 8-bit MC Us, KEELOQ® code hopping
devices, Serial EEPROMs, micro peripherals, nonvolat ile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS41272B-page 4 Advance Information © 2005 Microchip Technology Inc.
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technica l Support:
http://support.microchip.com
Web Address:
www.microchip.com
Atlanta
Alpharetta, GA
Tel: 770-640-0034
Fax: 770-640-0307
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasc a , IL
Tel: 630-285-0071
Fax: 630-285-0075
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
Los A n ge les
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
San Jose
Mountain View, CA
Tel: 650-215-1444
Fax: 650-961-0286
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
ASIA/PACIFIC
Australia - Sydney
Tel: 61-2-9868-67 33
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8528-2 100
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8676-6 200
Fax: 86-28-8676-6599
China - Fuzhou
Tel: 86-591-8750-3506
Fax: 86-591-8750-3521
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5 533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2 829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
China - Shunde
Tel: 86-757-2839-5507
Fax: 86-757-2839-5571
China - Wuhan
Tel: 86-27-5980-5 300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7 250
Fax: 86-29-8833-7256
ASIA/PACIFIC
India - Bangalore
Tel: 91-80-2229-0061
Fax: 91-80-2229-0062
India - New Delhi
Tel: 91-11-5160-8631
Fax: 91-11-5160-8632
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Korea - Gumi
Tel: 82-54-473-4301
Fax: 82-54-473-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Malaysia - Penang
Tel: 60-4-646-8870
Fax: 60-4-646-5086
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-572-9526
Fax: 886-3-572-6459
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
Thail a nd - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
EUROPE
Austria - Wels
Tel: 43-7242-2244-399
Fax: 43-7242-2244-393
Denmark - Copenhage n
Tel: 45-4450-2828
Fax: 45-4485-2829
France - Paris
Tel: 33-1-69-53 -63-20
Fax: 33-1-69-30-90-79
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-14 4-44
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Sp ain - Madr i d
Tel: 34-91-708-08-90
Fax: 34-91-708-08 -91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
WORLDWIDE SALES AND SERVICE
10/31/05