Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Features P-LCC-4 package. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Wide viewing angle. Suitable for vapor-phase reflow. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version Descriptions The 67-22 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Emitted Color Type Material R6 AlGaInP Brilliant-Red G6 AlGaInP Brilliant Yellow Green Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 1 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Package Dimensions Red Green Note: The tolerances unless mentioned is 0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 2 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) R6 25 G6 25 R6 60 G6 60 R6 60 G6 60 R6 2000 G6 2000 IF mA Pd mW IFP mA Electrostatic Discharge(HBM) ESD V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +90 Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 3 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Min. Typ. Max. Unit Condition R6 57 ----- 140 mcd G6 36 ----- 90 mcd ----- 130 ----- deg IF=20mA R6 ----- 632 ----nm IF=20mA G6 ----- 575 ----- R6 621 ----- 627 nm IF=20mA G6 570 ----- 574 R6 ----- 20 ----nm IF=20mA G6 ----- 20 ----- R6 1.75 ----- 2.35 V IF=20mA G6 1.75 ----- 2.35 ----- ----- 10 A VR=5V IF=20mA IV 21/2 p d VF IR Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 4 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Bin Range of Luminous Intensity Chip Bin Code Min. Max. P2 57 72 Q1 72 90 Q2 90 112 R1 112 140 N2 36 45 P1 45 57 P2 57 72 Q1 72 90 Bin Code Min. Max. 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 Unit Condition mcd IF=20mA Unit Condition V IF=20mA R6 G6 Bin Range of Dominant Wavelength Chip R6 G6 Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Forward Voltage: 0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 5 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Typical Electro-Optical Characteristics Curves(R6) Forward Current vs. Forward Voltage Ta=25C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 550 600 650 700 Wavelength (nm) 40 30 20 10 0 750 1.4 Relative luminous intensity (%) Relative luminous intensity (%) 2.0 2.2 Forward Current 100 10 0 20 40 60 80 100 1000 2.4 Ta=25C f=1KHz Duty=1/10 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (C) Radiation Diagram 0 10 Forward Current Derating Curve Forward Current IF (mA) 1.8 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 1.6 Forward Voltage VF (V) Relative Luminous Intensity vs. 1000 Ta=25C 50 40 Ta=25C 20 30 30 40 1.0 20 10 0.9 50 0.8 60 70 0.7 20 0 40 60 85 100 Ambient Temperature Ta (C) 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 6 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Typical Electro-Optical Characteristics Curves(G6) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25C 50 Forward Current IF (mA) Relative Luminous Intensity (%) 100 75 50 25 0 500 550 600 650 Wavelength (nm) 40 30 20 10 0 1.6 700 1000 100 2.2 2.4 2.6 10 0 20 40 60 80 100 1000 f=1KHz Duty=1/10 100 10 1 0 10 Ambient Temperature Ta (C) 2 1 10 10 Forward Current I F (mA) Radiation Diagram Forward Current Derating Curve 0 40 Forward Current I F (mA) 2.0 Relative Luminous Intensity vs. Forward Current Ta=25C Relative Luminous Intensity (%) Relative Luminous Intensity (%) 1.8 Forward Voltage V (V) F Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25C 10 3 10 Ta=25C 20 30 30 40 1.0 20 10 0 0.9 50 0.8 60 0.7 20 0 40 60 80 100 0.5 0.3 0.1 0.2 0.4 0.6 70 80 90 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 7 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Label Explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank EVERLIGHT RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 8 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Carrier Tape Dimensions: Loaded Quantity 2000 PCS per reel 4 + 3 + 1 2 Note: The tolerances unless mentioned is 0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 9 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Max. 10 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Test Sample Size Ac/Re Hours/Cycles 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA/ 25 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 10 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260C Max. 10sec. Max. Above255C 30sec.Max. 3C/sec.Max. 6C/sec.Max. Pre-heating Above 217C 60~150sec. 150~200C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 11 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen Technical Data Sheet Top Views LEDs 67-22/R6G6C-B09/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 12 of 12 Device No.DSE-0000926 Prepared date:18-Mar.-2011 Prepared by: Rita Shen