DG189/190/191 Vishay Siliconix High-Speed Drivers with Dual SPDT JFET Switches FEATURES BENEFITS D Constant On-Resistance Over Entire Analog Range D Low Leakage D Low Crosstalk D Rad Hardness D D D D D APPLICATIONS Low Distortion Eliminates Large Signal Errors High Precision High Bandwidth Capability Fault Protection D D D D D Audio Switching Video Switching Sample/Hold Guidance and Control Systems Aerospace DESCRIPTION The DG189/190/191 are precision dual single-pole, double-throw (SPDT) analog switches designed to provide accurate switching of video and audio signals. This series is ideally suited for applications requiring a constant on-resistance over the entire analog range. The major difference in the devices is the on-resistance (DG189--10 , DG190--30 , DG191--75 Reduced errors are achieved through low leakage current (ID(on) < 2 nA). Applications which benefit from the flat JFET on-resistance include audio switching, video switching, and data acquisition. To achieve fast and accurate switch performance, each device comprises four n-channel JFET transistors and a TTL compatible bipolar driver. The driver is designed to achieve break-before-make switching action, eliminating the inadvertent shorting between channels and the crosstalk which would result. In the on state, each switch conducts current equally well in either direction. In the off condition, the switches will block up to 20 V peak-to-peak, with feedthrough of less than -60 dB at 10 MHz. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION Dual-In-Line Flat Package D1 1 16 S1 NC 2 15 IN1 D3 3 14 S3 4 S4 S4 1 14 S3 D4 2 13 D3 V- D2 3 12 D1 13 VR S2 4 11 S1 5 12 VL IN2 5 10 IN1 D4 6 9 V-* 6 11 V+ V+ 7 8 NC VR 7 10 IN2 VL D2 8 9 S2 Top View Refer to JAN38510 Information, Military Section Top View *Common to Substrate and Case TRUTH TABLE Logic SW1, SW2 SW3, SW4 0 OFF ON 1 ON OFF 08V Logic g "0" v 0.8 Logic "1" w 2 2.4 4V Document Number: 70034 S-51140--Rev. D, 20-Jun-05 www.vishay.com 1 DG189/190/191 Vishay Siliconix ORDERING INFORMATION Temp Range Package -25 to 85_C 16-Pin Sidebraze Part Number DG189BP DG190BP DG191BP DG189AP DG190AP 16 Pin Sidebraze 16-Pin 55 to 125_C -55 DG191AP DG189AP, DG189AP/883, 5962-9068901MEA DG190AP, DG190AP/883, JM38510/11107BEA DG191AP, DG191AP/883, JM38510/11108BEA 14 Pin Flat Pack 14-Pin JM38510/11107BXA JM38510/11108BXA ABSOLUTE MAXIMUM RATINGS V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Current (S or D) DG190, DG191 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA V+ to VD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 V Current (All Other Pins) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA VS, VD to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 33 V Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to 150_C VD to VD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "22 V VL to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V VL to VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V VL to VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V VIN to VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V VR to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 V VR to VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 V Current (S or D) DG189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA Power Dissipationa 16-Pin Sidebrazeb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 mW 14-Pin Flat Packc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 mW Notes: a. All leads welded or soldered to PC Board. b. Derate 12 mW/_C above 75_C c. Derate 10 mW/_C above 75_C SCHEMATIC DIAGRAM (TYPICAL CHANNEL) VL V+ S IN D VR V- FIGURE 1. www.vishay.com 2 Document Number: 70034 S-51140--Rev. D, 20-Jun-05 DG189/190/191 Vishay Siliconix SPECIFICATIONSa FOR DG189 Test Conditions Unless Specified Parameter Symbol V+ = 15 V, V- = -15 V, VL = 5 V VR = 0 V, VIN = 0.8 V or 2 Vf Tempb Typc A Suffix B Suffix -55 to 125_C -25 to 85_C Mind Maxd Mind -7.5 15 -7.5 Maxd Unit Analog Switch Analog Signal Rangee Drain-Source On-Resistance VANALOG rDS(on) Source Off Leakage Current IS(off) S( ff) Full 15 V IS = -10 mA, VD = -7.5 V Room Full 7.5 10 20 15 25 VS = "10 V, VD = #10 V V+ = 10 V, V- = -20 V Room Hot 0.05 10 1000 15 300 VS = "7.5 V, VD = #7.5 V Room Hot 0.05 10 1000 15 300 VS = "10 V, VD = #10 V V+ = 10 V, V- = -20 V Room Hot 0.04 10 1000 15 300 VS = "7.5 V, VD = #7.5 V Room Hot 0.03 10 1000 15 300 Drain Off Leakage Current ID(off) D( ff) Channel On Leakage Current ID(on) VD = VS = "7.5 V Room Hot -0.1 Saturation Drain Current IDSS 2 ms Pulse Duration Room 300 Input Current with Input Voltage High IINH VIN = 5 V Room Hot <0.01 Input Current with Input Voltage Low IINL VIN = 0 V Full -30 Room 240 400 425 Room 140 200 225 -2 -200 nA -10 -200 mA Digital Input 10 20 -250 10 20 A -250 Dynamic Characteristics Turn-On Time ton Turn-Off Time toff See Switching Time Test Circuit Source-Off Capacitance CS(off) VS = -5 V, ID = 0 Room 21 Drain-Off Capacitance CD(off) VD = -5 V, IS = 0 Room 17 Channel-On Capacitance CD(on) VD = VS = 0 V Room 17 Off Isolation OIRR Room >55 f = 1 MHz f = 1 MHz, RL = 75 ns pF dB Power Supplies Positive Supply Current I+ Room 0.6 Negative Supply Current I- Room -2.7 Logic Supply Current IL Room 3.1 Reference Supply Current IR Room -1 VIN = 0 V V, or 5 V 1.5 -5 1.5 -5 4.5 -2 4.5 mA -2 Notes: a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25_C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. Document Number: 70034 S-51140--Rev. D, 20-Jun-05 www.vishay.com 3 DG189/190/191 Vishay Siliconix SPECIFICATIONSa FOR DG190 Test Conditions Unless Specified Parameter A Suffix B Suffix -55 to 125_C -25 to 85_C V+ = 15 V, V- = -15 V, VL = 5 V VR = 0 V, VIN = 0.8 V or 2 Vf Tempb VANALOG Full rDS(on) IS = -10 mA, VD = -7.5 V Room Full 18 30 60 VS = "10 V, VD = #10 V V+ = 10 V, V- = -20 V Room Hot 0.06 1 100 5 100 VS = "7.5 V, VD = #7.5 V Room Hot 0.1 1 100 5 100 VS = "10 V, VD = #10 V V+ = 10 V, V- = -20 V Room Hot 0.05 1 100 5 100 VS = "7.5 V, VD = #7.5 V Room Hot 0.06 1 100 5 100 Symbol Typc Mind Maxd Mind Maxd Unit -7.5 15 -7.5 15 V 50 75 Analog Switch Analog Signal Rangee Drain-Source On-Resistance Source Off Leakage Current IS(off) S( ff) Drain Off Leakage Current ID(off) D( ff) Channel On Leakage Current ID(on) VD = VS = "7.5 V Room Hot -0.02 Input Current with Input Voltage High IINH VIN = 5 V Room Hot <0.01 Input Current with Input Voltage Low IINL VIN = 0 V Full -30 Room 85 150 180 Room 95 130 150 VS = -5 V, ID = 0 Room 9 VD = -5 V, IS = 0 Room 6 VD = VS = 0 V Room 14 Room >50 -2 -200 nA -10 -200 Digital Input 10 20 -250 10 20 A -250 Dynamic Characteristics Turn-On Time ton Turn-Off Time toff Source-Off Capacitance See Switching Time Test Circuit CS(off) Drain-Off Capacitance CD(off) Channel-On Capacitance CD(on) Off Isolation OIRR f = 1 MHz f = 1 MHz, RL = 75 ns pF dB Power Supplies Positive Supply Current I+ Room 0.6 Negative Supply Current I- Room -2.7 Logic Supply Current IL Room 3.1 Reference Supply Current IR Room -1 VIN = 0 V V, or 5 V 1.5 -5 1.5 -5 4.5 -2 4.5 mA -2 Notes: a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25_C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. www.vishay.com 4 Document Number: 70034 S-51140--Rev. D, 20-Jun-05 DG189/190/191 Vishay Siliconix SPECIFICATIONSa FOR DG191 Test Conditions Unless Specified Parameter Symbol V+ = 15 V, V- = -15 V, VL = 5 V VR = 0 V, VIN = 0.8 V or 2 Vf Tempb Typc A Suffix B Suffix -55 to 125_C -25 to 85_C Mind Maxd Mind -10 15 -10 Maxd Unit Analog Switch Analog Signal Rangee Drain-Source On-Resistance VANALOG rDS(on) Source Off Leakage Current IS(off) S( ff) Full 15 V IS = -10 mA, VD = -7.5 V Room Full 35 75 150 100 150 VS = "10 V, VD = #10 V V+ = 10 V, V- = -20 V Room Hot 0.05 1 100 5 100 VS = "10 V, VD = #10 V Room Hot 0.07 1 100 5 100 VS = "10 V, VD = #10 V V+ = 10 V, V- = -20 V Room Hot 0.04 1 100 5 100 VS = "10 V, VD = #10 V Room Hot 0.05 1 100 5 100 Drain Off Leakage Current ID(off) D( ff) Channel On Leakage Current ID(on) VD = VS = "10 V Room Hot -0.03 Input Current with Input Voltage High IINH VIN = 5 V Room Hot <0.01 Input Current with Input Voltage Low IINL VIN = 0 V Full -30 Room 120 250 300 Room 100 130 150 VS = -5 V, ID = 0 Room 9 VD = -5 V, IS = 0 Room 6 VD = VS = 0 V Room 14 Room >50 -2 -200 nA -10 -200 Digital Input 10 20 -250 10 20 A -250 Dynamic Characteristics Turn-On Time ton Turn-Off Time toff Source-Off Capacitance See Switching Time Test Circuit CS(off) Drain-Off Capacitance CD(off) Channel-On Capacitance CD(on) Off Isolation OIRR f = 1 MHz f = 1 MHz, RL = 75 Positive Supply Current I+ Room 0.6 Negative Supply Current I- Room -2.7 Logic Supply Current IL Room 3.1 Reference Supply Current IR Room -1 VIN = 0 V, V or 5 V ns pF p dB 1.5 -5 1.5 -5 4.5 -2 4.5 mA -2 Notes: a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25_C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. Document Number: 70034 S-51140--Rev. D, 20-Jun-05 www.vishay.com 5 DG189/190/191 Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Supply Current vs. Temperature 5 IIN vs. VIN and Temperature 100 VINL = 0 VINH = 5 V 80 IL 3 I IN (mA) I L , I-, I+, I R (mA) 4 -I- 2 -IINL 60 40 -IR 1 20 I+ IINH 0 -55 -35 -15 5 25 45 65 85 105 0 -55 -35 125 -15 5 Temperature (_C) 65 85 105 125 Switching Time vs. VD and Temperature (DG189) 230 VD = 7.5 V DG191 210 tON VD = -7.5 V 190 t ON, t OFF (ns) DG190 r DS(on) ( ) 45 Temperature (_C) rDS(on) vs. Temperature 100 25 10 DG189 170 tOFF 150 130 VD= -7.5 V IS = -10 mA 110 1 -50 -25 0 25 50 75 100 90 -55 125 -35 -15 5 Temperature (_C) Leakage vs. Temperature (DG189) 100 t ON, t OFF (ns) I S, I D (nA) 105 125 VD = -7.5 V 110 1 tON 100 90 tOFF 80 70 ID(on) ID(off) 60 0.1 65 85 Temperature (_C) 6 85 VD = 7.5 V 120 IS(off) www.vishay.com 65 Switching Time vs. VD and Temperature (DG190/191) 10 45 45 130 V+ = 10 V V- = -20 V VL = 5 V VR = 0 25 25 Temperature (_C) 105 125 50 -55 -35 -15 5 25 45 65 85 105 125 Temperature (_C) Document Number: 70034 S-51140--Rev. D, 20-Jun-05 DG189/190/191 Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) ID(off) vs. Temperature (DG190/191) 100 Capacitance vs. VD or VS (DG189) 30 f = 1 MHz V+ = 10 V, V- = -20 V VD = -10 V, VS = 10 V 26 C S, D (pF) I D (nA) 10 B Suffix 1 CS(off) 22 CD(on) 18 A Suffix CD(off) 14 0.1 10 25 20 18 65 85 Temperature (_C) 105 -8 125 Capacitance vs. VD or VS (DG190/191) VINL = 0.8 V VINH = 2 V f = 1 MHz 90 80 CD(on) 70 12 60 CS(off) 8 CD(off) 6 4 2 0 -10 DG190/191 DG189 50 40 30 V+ = 15 V, V- = -15 V VR = 0, VL = 5 V RL = 75 VIN w 220 mVRMS 20 Capacitance is measured from test terminal to common. 10 0 -8 -6 -4 -2 0 2 4 6 8 VD or VS - Drain or Source Voltage (V) Document Number: 70034 S-51140--Rev. D, 20-Jun-05 8 Off Isolation vs. Frequency 14 10 -4 0 4 VD or VS - Drain or Source Voltage (V) 100 ISO (dB) C S, D (pF) 16 45 10 105 106 107 108 f - Frequency (Hz) www.vishay.com 7 DG189/190/191 Vishay Siliconix TEST CIRCUITS Feedthrough due to charge injection may result in spikes at the leading and trailing edge of the output waveform. +5 V +15 V VL VS1 VS2 tON: VS = 3 V tOFF: VS = -3 V Logic Input V+ S1 D1 S3 D3 IN 3V CL 100 pF tON Switch Output -15 V tOFF 0V 90% -3 V CL (includes fixture and stray capacitance) RL V OUT + V S x R ) r L 90% 0V V- VR 50% 0V VO RL 1 k tr <10 ns tf <10 ns 3V DS(on) FIGURE 2. Switching Time APPLICATION HINTSa Switch DG189 DG190 DG191 VIN Logic Input Voltage VINH(min)/VINL(max V+ Positive Supply Voltage (V) V- Negative Supply Voltage (V) VL Logic Supply Voltage (V) VR Reference Supply Voltage (V) 15b -15 5 GND 2.0/0.8 -7.5 to 15 10 -20 5 GND 2.0/0.8 -12.5 to 10 12 -12 5 GND 2.0/0.8 -4.5 to 12 15b -15 5 GND 2.0/0.8 -10 to 15 10 -20 5 GND 2.0/0.8 -15 to 10 12 -12 5 GND 2.0/0.8 -7 to 12 ) (V) VS Analog Voltage Range (V) Notes: a. Application Hints are for DESIGN AID ONLY, not guaranteed and not subject to production testing. b. Electrical Parameter Chart based on V+ = 15 V, VL = 5 V, VR = GND www.vishay.com 8 Document Number: 70034 S-51140--Rev. D, 20-Jun-05 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1