MBR20100CTP SWITCHMODE Power Rectifier . . . using the Schottky Barrier principle with a platinum barrier metal. These state-of-the-art devices have the following features: * * * * * * * * 20 Amps Total (10 Amps per Diode Leg) Guardring for Stress Protection Low Forward Voltage 150C Operating Junction Temperature Epoxy Meets UL94, VO at 1/8 Low Power Loss/High Efficiency High Surge Capacity Low Stored Charge Majority Carrier Conduction http://onsemi.com SCHOTTKY BARRIER RECTIFIER 20 AMPERES 100 VOLTS 1 Mechanical Characteristics: 2, 4 * Case: Epoxy, Molded * Weight: 1.9 grams (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * 3 4 Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped 50 units per plastic tube Marking: B20100P MAXIMUM RATINGS (Per Diode Leg) 1 Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 100 V Average Rectified Forward Current (Rated VR, TC = 133C) IF(AV) 10 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 133C) IFRM 20 A Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 150 A Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) IRRM 0.5 A Storage Temperature Range Tstg -65 to +175 C Operating Junction Temperature TJ -65 to +150 C dv/dt 10,000 V/s Rating Voltage Rate of Change (Rated VR) 2 3 CASE 221A TO-220AB PLASTIC MARKING DIAGRAM YY WW B20100P AKA YY = Year WW = Work Week B20100P= Device Code AKA = Diode Polarity ORDERING INFORMATION Semiconductor Components Industries, LLC, 2001 May, 2001 - Rev. 1 1 Device Package Shipping MBR20100CTP TO-220 50 Units/Rail Publication Order Number: MBR20100CTP/D MBR20100CTP THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Maximum Thermal Resistance, Junction to Case RJC 2.0 C/W Maximum Thermal Resistance, Junction to Ambient RJA 60 C/W ELECTRICAL CHARACTERISTICS (Per Diode Leg) Maximum Instantaneous Forward Voltage (Note 1.) (iF = 10 Amps, TC = 125C) (iF = 10 Amps, TC = 25C) (iF = 20 Amps, TC = 125C) (iF = 20 Amps, TC = 25C) vF Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TC = 125C) (Rated dc Voltage, TC = 25C) iR Volts 0.75 0.85 0.85 0.95 mA 6.0 0.1 iF, INSTANTANEOUS FORWARD CURRENT (A) iF, INSTANTANEOUS FORWARD CURRENT (A) 1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0% 100 75C 125C 25C 10 1 0.1 1 1.1 1.2 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 100 75C 125C 25C 10 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage 700 125C 600 0.0001 C, CAPACITANCE (pF) IR, REVERSE CURRENT (A) 0.001 75C 0.00001 0.000001 0.0000001 0.00000001 25C 0 10 500 400 300 200 100 40 50 60 70 80 20 30 VR, REVERSE VOLTAGE (VOLTS) 90 100 0 0 Figure 3. Typical Reverse Current 20 40 60 80 100 VR, REVERSE VOLTAGE (VOLTS) Figure 4. Typical Capacitance http://onsemi.com 2 120 14 18 16 dc RATED VOLTAGE APPLIED 14 12 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) IF(AV), AVERAGE FORWARD CURRENT (A) MBR20100CTP SQUARE WAVE 10 8 6 4 2 0 115 120 125 130 140 145 135 TC, CASE TEMPERATURE (C) 150 10 SQUARE WAVE 8 6 4 2 0 155 Figure 5. Current Derating, Case, Per Diode dc 12 0 14 16 12 2 4 6 8 10 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 18 Figure 6. Forward Power Dissipation, Per Diode http://onsemi.com 3 MBR20100CTP PACKAGE DIMENSIONS TO-220 THREE-LEAD TO-220AB CASE 221A-09 ISSUE AA -T- B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 1-303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MBR20100CTP/D