MAT'L NO, INTERNAL DIM, *A" MATERIAL / PLATING 74962-0001 4-40 UNC-28 | .338 / 8.60 1215 STEEL 74962-0002 | M3x0.5 CLASS 6H | 338 / 8.60] ZN CLEAR TRIVALENT CHROMATE NOTES: 74962-0003 4-40 UNC-2B | 378 / 9.60 1215 STEEL 4. PARTS ARE PACKAGED IN POLY BAGS CONSISTING OF 40 PIECES. 74962-0004 M3x0.5 CLASS 6H | .378 / 9.60 | ZN CLEAR TRIVALENT CHROMATE 2. INTERNAL AND EXTERNAL THREADS TO WITHSTAND A MINIMUM APPLIED TORQUE OF 5 Ibf in/5.76 kaf cm. At 165 4.19 SEE CHART FOR _ THREAD TYPE 216 ; ; | iG REF- 187 - SN / #4-40 UNC-2A Nan SCALE DESIGN UNITS Sool |QUALITY) GENERAL TOLERANCES THIRD ANGLE SSS! |symBots| (UNLESS SPECIFIED) 10:1 INCH Oc PROJECTION REVISE ON CAD ONLY a S$ S = mm INCH DIMENSION STYLE TITLE , aS Ssiz 7 PLACES}#--- |+--- IN/MM TDP 3/16" HEX JACKPOST BAN aE] W-o Beaces- [+010 | RAWaY DATE ES ci 9 2 PLACES|+0.25 [+--- TMCCLELL 03/03/11 =a Zw 41 PLACE J4--- +--- CHECKED BY DATE hala aa =| L a = = \/- 0 ANGULAR +1/2 [APPROVED BY DATE iol OLE INCORPORATED Sean . . SHEET NO. z= s=6 DRAFT WHERE APPLICABLE IWBaNaKiS _o8/tt/t7| SEE CHART |SD-74962-000| + oF Gm SU | _ MUST REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX | C i WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION rvs obo 11 10 9 8 | 7 | 6 5 4 3 2 | 1a 12 " 40 8 7 6 5 4 3 2 1 MAT'L NO. Nea DIM. "A" | MATERIAL / PLATING NOTES: 74962-1000 4-40 UNC-2B | .338 / 8.60 SE) a0 oA STEEL 1. PARTS ARE PACKAGED IN POLY BAGS CONSISTING OF 40 PIECES. 74962-2000 | M3x0.5 CLASS 6H | . : 2. INTERNAL AND EXTERNAL THREADS TO WITHSTAND A MINIMUM APPLIED 74962-3000 4-40 UNC-2B |.378 / 9.60 STAINLESS STEEL TORQUE OF 5 Ibf in/5.76 kgf cm. 74962-4000 | M3x0.5 CLASS 6H | 378 / 9.60 303 74962-0005 4-40 UNC-28 |.421 / 10.69 STAINLESS STEEL 74962-0006 | M3x0.5 CLASS 6H|.421 / 10.69 303 A! 165 4.19 SEE CHART FOR _ THREAD TYPE 216 = 5zgrer. 187 4 SN / 75 #4-40 UNC-2A Ss & Ss QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE SSS] |sympots| (UNLESS SPECIFIED) IN/MM 10:1 INCH Oc PROJECTION = = = mm INCH DRAWN BY DATE TITLE . w=) 2/7-0 [CPLACES|E=-- [= --- | IBARRA 2044/08/04 TDP 3/16" HEX JACKPOST BA & 3 PLACES|t--[+.010 __[FHECKED By DATE Woe olf WO I PLaces+025 |+--- POFF 2014/08/29 Wo eu 4 wu 1 PLACE |--- $--- [APPROVED BY DATE eSe5s| WO bo Prace = + SMILLER 2014/09/04 molex <= Oo 3 a BS ANGULAR +1722 MATERIAL NO. DOCUMENT NO. SHEET NO. eC eet DRAFT WHERE APPLICABLEL_ EE TABLE SD-74962-1000 1 OF 1 2Wou4_ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A w WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 12 " 40 8 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/113 2 "1 10 9 8 7 6 5 4 3 2 1 MAT'L NO. Nea eee NAL DIM. 7A" MATERIAL / PLATING NOTES: 74962-1110 4-40 UNC-28 | 4-40 UNC-2A 338 / 8.60 | STAINLESS STEEL 303 / NYLON TORQUE PATCH 1, PARTS ARE PACKAGED IN POLY BAGS CONSISTING OF 40 PIECES. 2. INTERNAL AND EXTERNAL THREADS TO WITHSTAND A MINIMUM APPLIED TORQUE OF 5 Ibf in/5.76 kgf cm. 3, NYLOK TORQUE PATCH LOCATED TO THE LEFT OF THE FIRST OR SECOND FULL THREADS AND COVERS 3 THREADS MINIMUM. A 165 SEE TABLE FOR 4.19 INTERNAL 7 THREAD TYPE / | F SEE NOTE 3 CT 7 216 _ | 5zgrer. 187 oa = | ae SEE TABLE FOR EXTERNAL THREAD TYPE == QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE SSS] |sympots| (UNLESS SPECIFIED) IN/MM 10:1 INCH Cl pRoveCTION a = = = mm INCH DRAWN BY DATE TITLE . BRR Z/7-0 [CPLACES|E~-- [= --- __|TIBARRA 2015/07/09 TDP 3/16" HEX JACKPOST 2 & 3 PLACES|[t--- [4.010 _|SRECKED BY DATE WITH TORQUE PATCH m= oft] O [2 PLACES|t0.25 |[+--- DMORGAN 2017/07/09 wa ez )u 1 PLACE [t--- |t--- [APPROVED BY DATE ESSss V7 aac + SMILLER 2015/08/44 molex ~Ss358 ANGULAR +1/2 MATERIAL NO. DOCUMENT NO. SHEET NO. SufTak DRAFT WHERE APPLICABLE| SEE TABLE SD-74962-1M10 1 OF 1 EWG < MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Bie WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 12 " 40 9 8 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/11