Miniature Aluminum Electrolytic Capacitors CulD RY Miniaturized, For Switching Power Supplies Series Smaller case sizes than RX series Suited for use in compact DC-DC converters Wide operating temperature range of -55~ + 105C Load life of 2000 hours at 105C Miniaturized Solvent Proof item Characteristics Operating temperature range 55~ + 105C Leak t !=0.01CV or 3A whichever is greater (after 2 minutes) Sakage Current max. 1=0.03CV or 4pA whichever is greater (after 1 minute) Capacitance tolerance +20% at 120Hz, 20C Dissipation fact Capacitance > 1000,F: tan increases by 0.02 for each 1000zF from below value. issipation factor max. : (at 120Hz, 20C) WV 63 10 16 25 35 50 63 tand 0.26 0.22 0.18 0.16 0.13 0.10 0.09 at WV 6.3 10 16 25 ~63 Low temperature characteristics 5 5 5 (Impedance ratio at 120Hz) Z~ 25CIZ + 20C 4 3 2 - Z-40C/Z + 20C 8 6 4 3 Load life Leakage current Less than specified value (after application of the rated Capacitance change Within + 20% of initial value voltage for 2000 hours at 105C) tan Less than 200% of specified value Shelf life (at 105C) After 1000 hours no load test, leakage current, capacitance and tan are same as load life value. @ DRAWING Unit : mm Insulating sleeve d+0.05 Tinned copper-ply wire ~ 3 _ ep | 10 | 18 | 16 | 18 6 | 4 5405 p | 50 | 50 | 75 | 75 $ 4 od | o6 | o6 | o8 | 08 3 5 L+1.5 max. 15 min. 4 min. T Safety vent DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT mA (rms) at 120Hz, 105C @D x L (mm) : mA (rms) wy uF 6.3 10 16 25 35 50 63 68 10x12.5 | 193 100 , 10x12.5 | 207 | 10x16 257 150 10x12.5 | 219 | 10x16 278 | 10x20 343 220 10x12.5 | 2461 10x125 | 266) 10x20 367 | 13x16 450 330 10x12.5 | 282 | 10x16 330 | 10x16 357 | 13x16 486 | 13x20 598 470 10x12.5 | 317 | 10x16 369 | 10x20 430 | 10x20 464 | 13x20 629 | 13x25 778 680 | 10x12.5 | 345 | 10x16 418 | 10x16 443 | 13x16 559 | 13x20 656 | 13x25 825 | 16x25 1038 1000 | 10x16 458 | 10x16 507 | 10x20 587 | 13x20 736 | 13x25 867 | 16x25 1110 | 1631.5 | 1377 1500 | 10x20 587 | 10x20 643 | 13x20 795 | 13x25 919 | 16x25 1090 | 16x31.5 | 1346 | 18x40 1758 2200 | 13x20 801 | 13x20 871 | 13x25 996 | 16x25 1165 | 16x31.5 | 1351 | 18x40 1771 3300 | 13x20 945 | 13x25 1113 | 16x25 1290 | 16x35.5 | 1554 | 18x 35.5 | 1776 4700 | 16x25 1319 | 16x25 1416 | 16x31.5 | 1613 | 18x40 1990 6800 | 16x25 1490 | 16x31.5 | 1735 | 16x40 1980 10000 | 16x31.5 | 1822 | 1835.5 | 2187 18000 | 18x35.5 | 2272