CSM_E6C2-C_DS_E_5_1
1
Slim Incremental 50-mm-dia. Rotary Encoder
E6C2-C
General-purpose Encoder with
External Diameter of 50 mm
Incremental model
External diameter of 50 mm.
Resolution of up to 2,000 ppr.
IP64 (improved oil-proof construction with sealed bearings)
Side or back connections are possible. Pre-wired Models with cable
connected at an angle.
Be sure to read Safety Precautions on
page 4.
Ordering Information
Encoders [Refer to Dimensions on page 4.]
Accessories (Order Separately) [Refer to Dimensions on Rotary Encoder Accessories.]
Refer to Accessories for details.
Power supply
voltage Output configuration Resolution (pulses/rotation) Model
5 to 24 VDC Open-collector output
(NPN)
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600 E6C2-CWZ6C (resolution) 2M
Example: E6C2-CWZ6C 10P/R 2M
720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000
12 to 24 VDC Open-collector output
(PNP)
100, 200, 360, 500, 600 E6C2-CWZ5B (resolution) 2M
Example: E6C2-CWZ5B 100P/R 2M
1,000, 2,000
5 to 12 VDC Voltage output
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600 E6C2-CWZ3E (resolution) 2M
Example: E6C2-CWZ3E 10P/R 2M
720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000
5 VDC Line-driver output
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600 E6C2-CWZ1X (resolution) 2M
Example: E6C2-CWZ1X 10P/R 2M
720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000
Name Model Remarks
Couplings
E69-C06B ---
E69-C68B Different end diameter
E69-C610B Different end diameter
E69-C06M Metal construction
Flanges E69-FCA ---
E69-FCA02 E69-2 Servo Mounting Bracket provided.
Servo Mounting Bracket E69-2 Provided with E69-FCA02 Flange.
E6C2-C
2
Ratings and Specifications
Note: Origin Indication
The following illustration shows the relationship between phase Z and the origin. Set cut face D to the phase Z origin as shown in the illustration.
*1. An inrush current of approximately 9 A will flow for approximately 0.3 ms when the power is turned ON.
*2. The line driver output is a data transmission circuit compatible with RS-422A and long-distance transmission is possible with a twisted-pair cable.(AM26LS31
equivalent)
*3. The maximum electrical response speed is determined by the resolution and maximum response frequency as follows:
This means that the E6C2-C Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical response speed.
Item Model E6C2-CWZ6C E6C2-CWZ5B E6C2-CWZ3E E6C2-CWZ1X
Power supply
voltage
5 VDC 5% to 24 VDC +15%,
ripple (p-p): 5% max.
12 VDC 10% to 24 VDC +15%,
ripple (p-p): 5% max.
5 VDC 5% to 12 VDC +10%,
ripple (p-p): 5% max. 5 VDC ±5%, ripple (p-p): 5% max.
Current
consumption*180 mA max. 100 mA max. 160 mA max.
Resolution
(pulses/rotation)
10, 20, 30, 40, 50, 60, 100, 200,
300, 360, 400, 500, 600, 720,
800, 1,000, 1,024, 1,200, 1,500,
1,800, 2,000
100, 200, 360, 500, 600, 1,000,
2,000
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600, 720, 800,
1,000, 1,024, 1,200, 1,500, 1,800, 2,000
Output phases Phases A, B, and Z Phases A, A, B, B, Z, and Z
Output configuration NPN open-collector output PNP open-collector output Voltage output (NPN output) Line driver output*2
Output capacity
Applied voltage: 30 VDC max.
Sink current: 35 mA max.
Residual voltage: 0.4 V max.
(at sink current of 35 mA)
Applied voltage: 30 VDC max.
Source current: 35 mA max.
Residual voltage: 0.4 V max.
(at source current of 35 mA)
Output resistance: 2 kΩ
Output current: 20 mA max.
Residual voltage: 0.4 V max.
(at sink current of 20 mA)
AM26LS31 equivalent
Output voltage:
High level: IO = 20 mA
Low level: IS = 20 mA
Output voltage: VO = 2.5 V min.
VS = 0.5 V max.
Maximum response
frequency*3100 kHz 50 kHz 100 kHz
Phase difference
between outputs 90°±45° between A and B (1/4 T ± 1/8 T)
Rise and fall times of
output
1 μs max.
(Control output voltage: 5 V, Load
resistance: 1 kΩ, Cable length:
2m)
1 μs max.
(Cable length: 2 m, Sink current: 10 mA)
0.1 μs max.
(Cable length: 2 m, IO = 20 mA,
IS = 20 mA)
Starting torque 10 mN·m max.
Moment of inertia 1×106 kg·m2 max.; 3 × 107 kg·m2 max. at 600 P/R max.
Shaft
loading
Radial 50 N
Thrust 30 N
Maximum
permissible speed 6,000 r/min
Protection circuits Power supply reverse polarity protection, Load short-circuit protection ---
Ambient temperature
range Operating: 10 to 70°C (with no icing), Storage: 25 to 85°C (with no icing)
Ambient humidity
range Operating/Storage: 35% to 85% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance Destruction: 10 to 500 Hz, 150 m/s2 or 2-mm double amplitude for 11 min 3 times each in X, Y, and Z directions
Shock resistance Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP64, in-house standards: oilproof
Connection method Pre-wired Models (Standard cable length: 2 m)
Material Case: Zinc alloy, Main unit: Aluminum, Shaft: SUS420J2
Weight
(packed state) Approx. 400 g
Accessories Instruction manual Note: Coupling, mounting bracket and hex-head spanner are sold separately.
38 dia.
120˚ 120˚
Phase Z origin
Cut face D
Origin
Maximum electrical response speed (rpm) = Maximum response frequency
Resolution × 60
E6C2-C
3
I/O Circuit Diagrams
Note: 1. The shielded cable outer core (shield) is not connected to the inner area or to the case.
2. The phase A, phase B, and phase Z circuits are all identical.
3. Normally, connect GND to 0 V or to an external ground.
Model/Output Circuits Output mode Connection
GND
0 V
3.3 Ω
35 mA
max.
30 VDC
max.
5 VDC
5% to
24 VDC +
15%
NPN
transistor
E6C2-C
main
circuit
(Black: phase A,
White: phase B,
Orange: phase Z)
Blue
Shield
Black, white, orange
Output signal
E6C2-CWZ6C
Phase A
Phase B
Phase Z
Phase A
Phase B
Phase Z
ON
OFF
ON
OFF
ON
OFF
T(360˚)
ON
OFF
ON
OFF
ON
OFF
1/4˚±1/8T(90˚±45˚) 1/4±1/8T (90˚±45˚)
T(360˚)
CW CCW
E6C2-CWZ6C NPN Open-collector Output Model
E6C2-CWZ5B PNP Open-collector Output Model
Direction of rotation: CW
(as viewed from end of shaft)
Direction of rotation: CCW
(as viewed from end of shaft)
Note: Phase A is 1/4 T ± 1/8 T
faster than phase B.
Note: Phase A is 1/4 T ± 1/8 T
slower than phase B.
The ONs in the above timing chart mean that the
output transistor is ON and the OFFs mean that the
output transistor is OFF.
Color Terminal
Brown Power supply
(+Vcc)
Black Output phase
A
White Output phase
B
Orange Output phase
Z
Blue 0 V (common)
GND
0 V
3.3 Ω
12 VDC 10% to
24 VDC +15%
35 mA
max.
PNP
transistor
E6C2-C
main
circuit Output signal
(Black: phase A, White:
phase B, Orange: phase
Blue
Brown
Shield
Black, white,
orange
E6C2-CWZ5B
GND
0 V
3.3 Ω
20mA
max.
2 kΩ
5 VDC 5% to
12 VDC +10%
NPN
transistor
E6C2-C
main
circuit
Output signal
(Black: phase A, White: phase
B, Orange: phase Z)
Blue
Brown
Shield
Black, white, orange
E6C2-CWZ3E
Phase A
Phase B
Phase Z
Phase A
Phase B
Phase Z
T(360˚)
H
L
H
L
H
L
H
L
H
L
H
L
T(360˚)
1/4±1/8T (90˚±45˚)1/4±1/8T (90˚±45˚)
CW CCW
E6C2-CWZ3E Voltage Output Model
Direction of rotation: CW
(as viewed from end of shaft)
Direction of rotation: CCW
(as viewed from end of shaft)
Note: Phase A is 1/4 T ± 1/8 T
faster than phase B.
Note: Phase A is 1/4 T ± 1/8 T
slower than phase B.
E6C2-CWZ1X
(Black/red: Phase A, White/red:
Phase B, Orange/red: Phase Z)
GND
0 V
5 VDC ±
5%
E6C2-C
main
circuit
AM26
LS31
equivalent
Non-reversed output
(Black: phase A, White: phase B,
Orange: phase Z)
Reversed output
Blue
Brown
Shield
Black, white, orange
Black, White, Orange
(with red stripe)
E6C2-CWZ1X Line Driver Output Model
Direction of rotation: CW
(as viewed from end of shaft)
Direction of rotation: CCW
(as viewed from end of shaft)
H
L
H
L
H
L
H
L
H
L
H
L
H
L
H
L
H
L
H
L
H
L
H
L
T(360˚) T(360˚)
CW CCW
Phase A
Phase B
Phase Z
Phase A
Phase B
Phase Z
Phase A
Phase B
Phase Z
Phase A
Phase B
Phase Z
1/4±1/8T (90˚±45˚)
1/4±1/8T (90˚±45˚)
Note: Receiver: AM26LS32
equivalent
Color Terminal
Brown Power supply
(+Vcc)
Black
Output phase A
White
Output phase B
Orange
Output phase Z
Black/red
stripes
Output phase A
White/red
stripes
Output phase B
Orange/
red stripes Output phase Z
Blue 0 V (common)
E6C2-C
4
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use the Encoder under ambient conditions that exceed the
ratings.
Wiring
Cable Extension Characteristics
When the cable length is extended, the output waveform startup
time is lengthened and it affects the phase difference
characteristics of phases A and B. Conditions will change
according to frequency, noise, and other factors. As a guideline,
use a cable length of 10 m* or less. If the cable must be more than
2 m, use a Model with a Line-driver Output (max. length for line-
driver output: 100 m).
* Recommended Cable
Conductor cross section: 0.2 mm2
Spiral shield
Conductor resistance: 92 Ω/km max. (20°C)
Insulation resistance: 5 Ω/km min. (20°C)
The output waveform startup time changes not only according to
the length of the cable, but also according to the load resistance
and the cable type.
Extending the cable length not only changes the startup time, but
also increases the output residual voltage.
Connection
Spurious pulses may be generated when power is turned ON and
OFF. Wait at least 0.1 s after turning ON the power to the Encoder
before using the connected device, and stop using the connected
device at least 0.1 s before turning OFF the power to the Encoder.
Also, turn ON the power to the load only after turning ON the power
to the Encoder.
(Unit: mm)
Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Encoder
Accessories (Order Separately)
Servo Mounting Bracket
E69-2 (Three brackets in a set.)
Refer to Accessories for details.
WARNING
Precautions for Correct Use
E6C2-CWZ@@
6
0
-0.021
dia.
25
0
-0.021
50 dia.
1
1.6 10
5
15 40 (6.59)
(60)
38 dia.
120˚ 120˚
dia.
Three, M4
holes; Depth:
7 mm
Origin of Phase Z
5-dia. oil-resistant PVC-insulated shielded cable with 5 conductors
(line driver: 8 conductors)
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.0 mm),
Standard length: 2 m
Couplings
E69-C06B
E69-C68B
E69-C610B
E69-C06M
Flanges
E69-FCA
E69-FCA02
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2011.4
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2011 All Right Reserved.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
E6C2-CWZ1X 1000P/R 2M E6C2-CWZ1X 100P/R 2M E6C2-CWZ1X 1200P/R 2M E6C2-CWZ1X 1500P/R 2M
E6C2-CWZ1X 1800P/R 2M E6C2-CWZ1X 2000P/R 2M E6C2-CWZ1X 20P/R 2M E6C2-CWZ1X 30P/R 2M E6C2-
CWZ1X 360P/R 2M E6C2-CWZ1X 400P/R 2M E6C2-CWZ1X 40P/R 2M E6C2-CWZ1X 500P/R 2M E6C2-CWZ1X
60P/R 2M E6C2-CWZ1X 720P/R 2M E6C2-CWZ3E-10 314P/R 5M E6C2-CWZ6C-12 500P/R 10M