Part Number 856963 875 MHz SAW Filter Data Sheet Features For ISM Band applications Usable bandwidth 10 MHz Low loss Single-ended operation Chip Scale Package (CSP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Surface Mount 2.00 x 1.50 x 0.69 mm CSP-8A Pin Configuration Bottom View m View CA 1 2 4 3 0.69 NOM. 0.73 MAX. 2.00 1.80 Pin No. 1 3 2,4 1.50 1.30 0.42 0.25x45 CHAMFER Description Input Output Case ground 0.56 Dimensions shown are nominal in millimeters All tolerances are 0.10mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0 m, over a 2 - 6 m Ni plating Subject to change or obsolescence without notice Rev - 09/10 (c) TriQuint Semiconductor Page 1 of 5 Part Number 856963 875 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 C to +85 C Parameter (3) Minimum Typical (4) Maximum Unit - 875 - MHz - 1.8 3 dB 40 35 35 40 30 52 42 48 52 39 - dB dB dB dB dB - 0.15 1.0 dB p-p - 8 50 ns p-p 10 - 14 50 50 - dB Center Frequency Maximum Insertion Loss 870 - 880 MHz Absolute Attenuation (5) 10 - 810 MHz 810 - 848 MHz 924 - 960 MHz 960 - 1110 MHz 1110 - 3000 MHz Amplitude Variation 870 - 880 MHz Group Delay Variation 870 - 880 MHz Input/Output Return Loss 870 - 880 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Notes: 1. All specifications are based on the test circuit below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to zero dB 6. This is the optimum impedance in order to achieve the performance Test Circuit: 1 50 Single-ended Input Subject to change or obsolescence without notice 50 3 50 2,4 Rev - 09/10 (c) TriQuint Semiconductor 50 Single-ended Output Page 2 of 5 Part Number 856963 875 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev - 09/10 (c) TriQuint Semiconductor Page 3 of 5 Part Number 856963 875 MHz SAW Filter Data Sheet Matching Schematics 1 50 Single-ended Input 50 3 50 Single-ended Output 50 2,4 Marking PCB Footprint MFG site Marking code EE M 0.31x45 CHAMFER WWY 1.50 0.62 ID dot 0.76 2.00 Date code The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 8.8 O330 4.0 ID dot 0.3 2.0 O1.5 A 1.75 3.5 8.0 2.34 O102 O20.2 O13.0 Direction of travel 2.0 1.09 Section A-A 1.83 4.0 O1.0 A Dimensions shown are nominal in millimeters Packaging quantity: 10000 units/reel Subject to change or obsolescence without notice Rev - 09/10 (c) TriQuint Semiconductor Page 4 of 5 Part Number 856963 875 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JEDEC J-STD-020C Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev - 09/10 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5