AU OPTRONICS CORPORATION
Product Specification
document version 1.0 1/29
G173HW01 V0
() Preliminary Specification
(V) Final Specification
Module 17.3” FHD Color TFT-LCD
Model Name G173HW01 V0
Customer Date
Approved by
Note: This Specification is subject to change without
notice.
Checked &
Approved by Date
Vito Huang 2011/5/30
Prepared by
Vivian Huang 2011/5/30
Audio Video Business Group /
AU Optronics corporation
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 2/29
G173HW01 V0
Contents
1. Handling Precautions ..................................................................................................................4
2. General Description.....................................................................................................................5
2.1 Display Characteristics ..........................................................................................................5
3. Functional Block Diagram.........................................................................................................10
4. Absolute Maximum Ratings......................................................................................................11
4.1 Absolute Ratings of TFT LCD Module ................................................................................. 11
4.2 Absolute Ratings of Environment ........................................................................................ 11
5. Electrical characteristics ..........................................................................................................12
5.1 TFT LCD Module..................................................................................................................12
5.2 Backlight Unit .......................................................................................................................14
6. Signal Characteristic .................................................................................................................15
6.1 Pixel Format Image..............................................................................................................15
6.2 The Input Data Format.........................................................................................................16
6.4 Interface Timing....................................................................................................................19
6.5 Power ON/OFF Sequence...................................................................................................20
7. Connector & Pin Assignment ...................................................................................................21
7.1 TFT LCD Module..................................................................................................................21
7.2 Backlight Unit .......................................................................................................................22
8. Reliability Test............................................................................................................................23
9. Shipping Label............................................................................................................................24
10. Packing Form............................................................................................................................25
10.1 Packaging material ............................................................................................................25
10.2 External packaging material required................................................................................25
10.3 Palletizing sequence..........................................................................................................26
10.4 Packing instruction.............................................................................................................27
11. Outline Drawing........................................................................................................................28
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 3/29
G173HW01 V0
Record of Revision
Version & Date
Page
Old Description New Description
0.0 2011/1/20 All First Edition for Customer
0.1 2011/1/31 12 IDD unit: A IDD unit: mA
14 VCC Max: 12.6V VCC Max: 13.4V
14 Operation Life LED life time
1.0 2011/5/30 5 White Luminance(cd/m2): 500(Typ.) White Luminance(cd/m2): 400(Typ.)
5 Optical Response Time(ms): 8(Typ.) Optical Response Time(ms): 40(Typ.)
5 Power Consumption(Watt): TBD(Typ.)
Power Consumption(Watt): 17(Typ.)
5 Weight(g): TBD(Typ.) Weight(g): 1080(Typ.)
6 Update Viewing Angle
6 Update Optical Response Time
6
Update Color / Chromaticity
Coordinates
6 Update White Luminance
12 IDD (mA): 350(Typ), 600(Max) IDD (mA): 1200(Typ), 1400(Max)
12 PDD (Watt): TBD(Typ), 2(Max) PDD (Watt): 5(Typ), 6(Max)
12 Update the diagram of Vin rising time
14 PVCC (Watt): 11.88(Typ), 13.39(Max) PVCC (Watt): 12(Typ), 15(Max)
14 Update LED Forward Voltage
14 Update Note6 description
25 Update Shipping Label
25 Update Packing Form
28 Update Outline Drawing
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 4/29
G173HW01 V0
1. Handling Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED light bar edge. Instead, press
at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be
damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 5/29
G173HW01 V0
2. General Description
G173HW01 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD panel, a LED driver
circuit, and a LED backlight system. The screen format is intended to support the FHD (1920(H) x 1080(V))
screen and 16.7M colors (RGB 6-bits + HiFRC data). All input signals are LVDS interface compatible.
Inverter card of backlight is not included.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 ℃ condition:
Items Unit Specifications
Screen Diagonal [mm] 17.3W (17.25)
Active Area [mm] 381.888 (H) x 214.812 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [mm] 0.1989 (per one triad) x 0.1989
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance [cd/m2] 400 (Typ.)
Contrast Ratio 600 : 1 (Typ)
Optical ResponseTime [msec] 40 (Typ, on/off)
Nominal Input Voltage VDD [Volt] 3.3 V
Power Consumption [Watt] 17 (Typ)
Weight [Grams] 1080 (Typ)
Physical Size (H x V x D) [mm] 403 (H) x 240 (V) x 12.5 (D) (Typ)
Electrical Interface Dual channel LVDS
Surface Treatment Hard-coating (3H), Glare treatment
Support Color 16.7M colors (RGB 6-bit data + HiFRC data)
Temperature Range (Ta)
Operating
Storage (Non-Operating)
[oC]
[oC]
0 to +70
-20 to +70
RoHS Compliance RoHS Compliance
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 6/29
G173HW01 V0
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature):
Item Unit Conditions Min.
Typ. Max. Note
Horizontal (Right)
CR = 10 (Left)
70
70
80
80 -
Viewing Angle [degree]
Vertical (Up)
CR = 10 (Down)
50
70
60
80 -
1
Luminance Uniformity [%] 13 Points 75 80 - 2, 3
Rising - 37 50
Falling - 3 10
Optical Response Time [msec]
Rising + Falling - 40 60
4, 5
Red x 0.590
0.640
0.690
Red y 0.296
0.346
0.396
Green x 0.264
0.314
0.364
Green y 0.574
0.624
0.674
Blue x 0.100
0.150
0.200
Blue y 0.004
0.054
0.104
White x 0.255
0.305
0.355
Color / Chromaticity
Coordinates
(CIE 1931)
White y 0.268
0.318
0.368
4
White Luminance
(At LED=100mA) [cd/m2 ] 320 400 - 4
Contrast Ratio 500 600 - 4
NTSC % 72
Optical Equipment: BM-5A, BM-7, PR880, or equivalent
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 7/29
G173HW01 V0
Note 1: Definition of viewing angle
Viewing angle is the measurement of contrast ratio≧10, or ≧5, at the screen center, over a 180° horizontal
and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows;
90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is
typically perpendicular to the display surface with the screen rotated about its center to develop the desired
measurement viewing angle.
Note 2: 13 points position
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 8/29
G173HW01 V0
Note 3:
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed after
lighting Backlight for 30 minutes in a stable, windless and dark room.
Center of the screen
TFT
-
LCD Module
50 cm
Photo detector
LCD Panel
Field=1°
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 9/29
G173HW01 V0
Note 5: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “Full Black” to
“Full White” (rising time), and from “Full White” to “Full Black” (falling time), respectively. The response time
is interval between the 10% and 90% of amplitudes. Please refer to the figure as below.
100
90
10
0
%
Optical
response
White
Black
White
Tr
F
Tr
R
100
90
10
0
%
Optical
response
White
Black
White
Tr
F
Tr
R
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 10/29
G173HW01 V0
3. Functional Block Diagram
The following diagram shows the functional block of the 17.3 inches Color TFT-LCD Module:
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 11/29
G173HW01 V0
4. Absolute Maximum Ratings
Absolute maximum ratings of the module are as following:
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit
Logic/LCD Drive
Voltage
Vin
-
0.3
+
3.6
[Volt]
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit
Operating Temperature
TOP 0 +70 [oC]
Operation Humidity HOP 5 95 [%RH]
Storage Temperature
TST -20 +70 [oC]
Storage Humidity HST 5 95 [%RH]
Note: Maximum Wet-
B
u
lb
s
h
ou
ldb
e
39
and no condensation.
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 12/29
G173HW01 V0
5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows:
Symble Parameter Min. Typ. Max.
Unit Condition
VDD Logic/LCD Drive
Voltage 3.0 3.3 3.6 [Volt] ±10%
IDD Input Current - 1200 1400 [mA] VDD= 5.0V, All Black Pattern
At 75Hz, +30%
PDD VDD Power - 5 6 [Watt] VDD= 5.0V, All Black Pattern
At 75Hz , Note 1
IRush Inrush Current - - 2000 [A] Note 2
VDDrp
Allowable
Logic/LCD Drive
Ripple Voltage
- - 100 [mV]
p-p
VDD= 3.3V, All Black Pattern
At 75Hz
Note 1: The variance of VDD power consumption is ±30%.
Note 2: Measurement conditions:
+5.0V
+12.0V
VCC
R1
47K
R2
1K
VR1
47K
SW1
SW MAG-SPST
1 2
F1
Q3
AO6402
G
D2S
D1
D5
D6
C1
1uF/16V
Q3
AO6402
G
D2 S
D1
D5
D6
C3
0.01uF/25V
C2
1uF/25V
(High to Low)
Control
Signal
(LCD Module Input)
90%
10%
Vin rising time
0
V
3.3
V
470 us
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 13/29
G173HW01 V0
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Note: LVDS Signal Waveform.
Symbol Item Min.
Typ.
Max.
Unit
Remark
VTH Differential Input High Threshold - - 100 [mV]
VCM=1.2V
VTL Differential Input Low Threshold -100
- - [mV]
VCM=1.2V
｜
｜
｜
｜VID｜
｜｜
｜ Input Differential Voltage 100 400 600 [mV]
VICM Differential Input Common Mode Voltage 1.125
- 1.375
[V] VTH/VTL=+-100mV
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 14/29
G173HW01 V0
5.2 Backlight Unit
Following characteristics are measured under a stable condition using a inverter at 25℃. (Room Temperature):
Symbol Parameter Min. Typ. Max. Unit Remark
VCC Input Voltage 10.8 12 13.4 [Volt]
IVCC Input Current - 0.99 - [A] 100% PWM Duty
PVCC Power Consumption - 12 15 [Watt]
100% PWM Duty
FPWM Dimming Frequency 200 - 20K [Hz]
Swing Voltage 3 3.3 5.5 [Volt]
Dimming duty cycle 5 - 100 %
IF LED Forward Current - 100 - [mA] Ta = 25oC
- (3.3) (3.7) [Volt] IF = 100mA, Ta = 0oC
- 3.2 3.6 [Volt] IF = 100mA, Ta = 25oC
VF LED Forward Voltage
- (3.1) (3.5) [Volt] IF = 100mA, Ta = 70oC
PLED LED Power Consumption - (10.24)
11.52 [Watt]
LED Life Time
50,000 - - Hrs IF=100mA, Ta= 25oC
Note 1: Ta means ambient temperature of TFT-LCD module.
Note 2: VCC, IVCC, PVCC are defined for LED backlight.(100% duty of PWM dimming)
Note 3: IF, VF are defined for one channel LED. There are four LED channel in back light unit.
Note 4: If G173HW01 V0 module is driven by high current or at high ambient temperature & humidity condition. The
operating life will be reduced.
Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated
data.
Note 6: LED lifetime is definition: brightness is decreased to 50% of the initial value. LED lifetime is restricted under
norma
l
con
di
t
i
on
,
am
bi
en
tt
empera
t
ure
=
25
an
dLED
opera
t
i
ng
IF
=
100
m
A
.
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 15/29
G173HW01 V0
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1st
Pixel
2nd
Pixel
1919th
Pixel
1920th
Pixel
1st
Line
R
G
B
R
G
B
R
G
B
R
G
B
1080th
Lin R
G
B
R
G
B
R
G
B
R
G
B
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 16/29
G173HW01 V0
6.2 The Input Data Format
Note1: Normally, DE, VS, HS on EVEN channel are not used.
Note2: 8-bit in
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 17/29
G173HW01 V0
6.3 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a
differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be
SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels
while the second LVDS port(RxExxx) transmits even pixels.
PIN #
SIGNAL NAME
DESCRIPTION
1 RxOIN0- Negative LVDS differential data input (Odd data)
2 RxOIN0+ Positive LVDS differential data input (Odd data)
3 RxOIN1- Negative LVDS differential data input (Odd data)
4 RxOIN1+ Positive LVDS differential data input (Odd data)
5 RxOIN2- Negative LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
6 RxOIN2+ Positive LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
7 VSS Power Ground
8 RxOCLKIN- Negative LVDS differential clock input (Odd clock)
9 RxOCLKIN+
Positive LVDS differential clock input (Odd clock)
10 RxOIN3- Negative LVDS differential data input (Odd data)
11 RxOIN3+ Positive LVDS differential data input (Odd data)
12 RxEIN0- Negative LVDS differential data input (Even data)
13 RxEIN0+ Positive LVDS differential data input (Even data)
14 VSS Power Ground
15 RxEIN1- Negative LVDS differential data input (Even data)
16 RxEIN1+ Positive LVDS differential data input (Even data)
17 VSS Power Ground
18 RxEIN2- Negative LVDS differential data input (Even data)
19 RxEIN2+ Positive LVDS differential data input (Even data)
20 RxECLKIN- Negative LVDS differential clock input (Even clock)
21 RxECLKIN+ Positive LVDS differential clock input (Even clock)
22 RxEIN3- Negative LVDS differential data input (Even data)
23 RxEIN3+ Positive LVDS differential data input (Even data)
24 VSS Power Ground
25 VSS Power Ground
26 VSS Power Ground
27 VSS Power Ground
28 VDD +3.3V Power Supply
29 VDD +3.3V Power Supply
30 VDD +3.3V Power Supply
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 18/29
G173HW01 V0
Note1: Start from left side
Note2: Input signals of odd and even clock shall be the same timing.
Note3: Please follow PSWG.
Connector
1
30
RxO
IN
0
-
VDD
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 19/29
G173HW01 V0
6.4 Interface Timing
6.4.1 Timing Characteristics
Basically, interface timings should match the 1920X1080 / 60Hz manufacturing guide line timing.
Note : DE mode only
6.4.2 Timing Diagram
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 20/29
G173HW01 V0
6.5 Power ON/OFF Sequence
VDD power and lamp on/off sequence is as follows. Interface signals are also shown in the chart. Signals
from any system shall be Hi-Z state or low level when VDD is off.
Power Sequence Timing
Power Sequence Timing
Value
Parameter
Min. Typ. Max.
Units
T1 0.5 - 10
T2 0 - 50
T3 200 - --
T4 0.5 - 10
T5 10 - -
T6 10 - -
T7 0 - -
T8 10 - -
T9 - - 10
T10 110 - -
T11 0 50
T12 0 10
T13 500 - -
ms
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 21/29
G173HW01 V0
7. Connector & Pin Assignment
Physical interface is described as for the connector on module.These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
7.1.1 Connector
Connector Name / Designation Interface Connector / Interface card
Manufacturer HRS
Type Part Number MDF76TW-30S-1H
Mating Type Part Number MDF76-30P-1C
7.1.2 Pin Assignment
Pin# Signal Name Pin# Signal Name
1 RxOIN0- 2 RxOIN0+
3 RxOIN1- 4 RxOIN1+
5 RxOIN2- 6 RxOIN2+
7 VSS 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 VSS
15 RxEIN1- 16 RxEIN1+
17 VSS 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 VSS
25 VSS 26 VSS
27 VSS 28 VDD
29 VDD 30 VDD
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 22/29
G173HW01 V0
7.2 Backlight Unit
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.2.1 Connector
Connector Name / Designation Lamp Connector / Backlight lamp
Manufacturer HRS
Type Part Number DF14A-6P-1.25H
Mating Type Part Number DF14-6S-1.25C
7.2.2 Pin Assignment
Pin No. Symbol Description
Pin1 VLED 12V input
Pin2 VLED 12V input
Pin3 GND GND
Pin4 GND GND
Pin5 On/OFF 3.3-5V:ON, 0V:OFF
Pin6 Dimming PWM
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 23/29
G173HW01 V0
8. Reliability Test
Environment test conditions are listed as following table.
Items Required Condition Note
Temperature Humidity Bias (THB) Ta= 50℃, 80%RH, 240hours
High Temperature Operation (HTO)
Ta= 70℃, 240hours
Low Temperature Operation (LTO) Ta= 0℃, 240hours
High Temperature Storage (HTS) Ta= 70℃, 240hours
Low Temperature Storage (LTS) Ta= -20℃, 240hours
Vibration Test
(Non-operation)
Acceleration: 1.5 G
Wave: Random
Frequency: 10 - 200 - 10 Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
Shock Test
(Non-operation)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
Drop Test Height: 60 cm, package test
Thermal Shock Test (TST) -20℃/30min, 60℃/30min, 50 cycles 1
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
8 points, 25 times/ point.
ESD (Electro-Static Discharge)
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
8 points, 25 times/ point.
2
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost.
Self-recoverable. No hardware failures.
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 24/29
G173HW01 V0
9. Shipping Label
Unit: mm
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 25/29
G173HW01 V0
10. Packing Form
10.1 Packaging material
FILM PROTECT
BAG ANTI-STATIC
TAPE
TAPE CREPED PAPER
PACKING CARTON
LABEL SPEC
LABEL CARTON.
CUSHION PACKING
10.2 External packaging material required
‧Carton : 524mm*321mm*360mm, weight (carton + cushion): 1250g
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 26/29
G173HW01 V0
‧Pallet : 1140mm*980mm*140mm
‧Stretch film : 500mm (W)*300M (L)
‧Corner angle : L type fiber board
‧PET band : 19mm (W)
‧ Label : 220mm*200mm
10.3 Palletizing sequence
pcs / box box / layer layer / pallet pcs / pallet
Shipping by air 10 2*3 3 180
Shipping by sea 10 2*3 3 180
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 27/29
G173HW01 V0
10.4 Packing instruction
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 28/29
G173HW01 V0
11. Outline Drawing
provided by
www.display-solution.com
info@display-solution.com
AU OPTRONICS CORPORATION
Product Specification
document version 1.0 29/29
G173HW01 V0
provided by
www.display-solution.com
info@display-solution.com
