Product Specification AU OPTRONICS CORPORATION G173HW01 V0 () Preliminary Specification (V) Final Specification Module 17.3" FHD Color TFT-LCD Model Name G173HW01 V0 Customer Date Approved by Checked & Approved by Date Vito Huang 2011/5/30 Prepared by Vivian Huang Note: This Specification is subject to change without notice. document version 1.0 provided by 2011/5/30 Audio Video Business Group / AU Optronics corporation 1/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 Contents 1. Handling Precautions .................................................................................................................. 4 2. General Description ..................................................................................................................... 5 2.1 Display Characteristics .......................................................................................................... 5 3. Functional Block Diagram.........................................................................................................10 4. Absolute Maximum Ratings......................................................................................................11 4.1 Absolute Ratings of TFT LCD Module ................................................................................. 11 4.2 Absolute Ratings of Environment ........................................................................................ 11 5. Electrical characteristics ..........................................................................................................12 5.1 TFT LCD Module..................................................................................................................12 5.2 Backlight Unit .......................................................................................................................14 6. Signal Characteristic .................................................................................................................15 6.1 Pixel Format Image ..............................................................................................................15 6.2 The Input Data Format .........................................................................................................16 6.4 Interface Timing....................................................................................................................19 6.5 Power ON/OFF Sequence...................................................................................................20 7. Connector & Pin Assignment ...................................................................................................21 7.1 TFT LCD Module..................................................................................................................21 7.2 Backlight Unit .......................................................................................................................22 8. Reliability Test ............................................................................................................................23 9. Shipping Label............................................................................................................................24 10. Packing Form............................................................................................................................25 10.1 Packaging material ............................................................................................................25 10.2 External packaging material required................................................................................25 10.3 Palletizing sequence..........................................................................................................26 10.4 Packing instruction.............................................................................................................27 11. Outline Drawing........................................................................................................................28 document version 1.0 provided by 2/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION Record of Revision Version & Date Page Old Description New Description 0.0 2011/1/20 All First Edition for Customer 0.1 2011/1/31 12 IDD unit: A IDD unit: mA 14 VCC Max: 12.6V VCC Max: 13.4V 14 Operation Life LED life time 5 White Luminance(cd/m2): 500(Typ.) White Luminance(cd/m2): 400(Typ.) 5 Optical Response Time(ms): 8(Typ.) Optical Response Time(ms): 40(Typ.) 5 Power Consumption(Watt): TBD(Typ.) Power Consumption(Watt): 17(Typ.) 5 Weight(g): TBD(Typ.) Weight(g): 1080(Typ.) 1.0 2011/5/30 6 Update Viewing Angle 6 Update Optical Response Time Update Color / Chromaticity 6 Coordinates Update White Luminance 6 12 IDD (mA): 350(Typ), 600(Max) IDD (mA): 1200(Typ), 1400(Max) 12 PDD (Watt): TBD(Typ), 2(Max) PDD (Watt): 5(Typ), 6(Max) Update the diagram of Vin rising time 12 14 PVCC (Watt): 11.88(Typ), 13.39(Max) 14 Update LED Forward Voltage 14 Update Note6 description 25 Update Shipping Label 25 Update Packing Form 28 Update Outline Drawing document version 1.0 provided by PVCC (Watt): 12(Typ), 15(Max) 3/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 1. Handling Precautions 1) Since front polarizer is easily damaged, please be cautious and not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. 6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. 7) Do not open nor modify the module assembly. 8) Do not press the reflector sheet at the back of the module to any direction. 9) In case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. 11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. 12) Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13) Severe temperature condition may result in different luminance, response time and lamp ignition voltage. 14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. 15) The data on this specification sheet is applicable when LCD module is placed in landscape position. 16) Continuous displaying fixed pattern may induce image sticking. It's recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen. document version 1.0 provided by 4/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 2. General Description G173HW01 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD panel, a LED driver circuit, and a LED backlight system. The screen format is intended to support the FHD (1920(H) x 1080(V)) screen and 16.7M colors (RGB 6-bits + HiFRC data). All input signals are LVDS interface compatible. Inverter card of backlight is not included. 2.1 Display Characteristics The following items are characteristics summary on the table under 25 condition: Screen Diagonal Items Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode Unit [mm] 381.888 (H) x 214.812 (V) [mm] 1920(x3) x 1080 0.1989 (per one triad) x 0.1989 [mm] R.G.B. Vertical Stripe 2 White Luminance [cd/m ] Optical ResponseTime [msec] Contrast Ratio Nominal Input Voltage VDD [Volt] Weight [Grams] Power Consumption Physical Size (H x V x D) Electrical Interface 400 (Typ.) 600 : 1 (Typ) 40 (Typ, on/off) 3.3 V 17 (Typ) [mm] 403 (H) x 240 (V) x 12.5 (D) (Typ) 1080 (Typ) Dual channel LVDS Hard-coating (3H), Glare treatment 16.7M colors (RGB 6-bit data + HiFRC data) Support Color RoHS Compliance Normally White [Watt] Surface Treatment Temperature Range (Ta) Operating Storage (Non-Operating) 17.3W (17.25) [oC] [oC] 0 to +70 -20 to +70 RoHS Compliance document version 1.0 provided by Specifications 5/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 (Room Temperature): Item Viewing Angle Luminance Uniformity Optical Response Time Unit [degree] [%] [msec] Color / Chromaticity Coordinates (CIE 1931) White Luminance (At LED=100mA) Conditions Typ. Max. (Right) (Left) 70 70 80 80 - Vertical CR = 10 (Up) (Down) 50 70 60 80 - 75 80 - Rising - 37 50 Falling - 3 10 Rising + Falling - 40 60 Red x 0.590 0.640 0.690 Red y 0.296 0.346 0.396 Green x 0.264 0.314 0.364 Green y 0.574 0.624 0.674 Blue x 0.100 0.150 0.200 Blue y 0.004 0.054 0.104 White x 0.255 0.305 0.355 White y 0.268 0.318 0.368 320 400 - 4 500 600 - 4 13 Points [cd/m2 ] 1 72 % Optical Equipment: BM-5A, BM-7, PR880, or equivalent document version 1.0 provided by Note Horizontal CR = 10 Contrast Ratio NTSC Min. 6/29 www.display-solution.com info@display-solution.com 2, 3 4, 5 4 Product Specification AU OPTRONICS CORPORATION G173HW01 V0 Note 1: Definition of viewing angle Viewing angle is the measurement of contrast ratio10, or 5, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). The 180 viewing angle range is broken down as follows; 90 () horizontal left and right and 90 () vertical, high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. Note 2: 13 points position document version 1.0 provided by 7/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 Note 3: Note 4: Measurement method The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and dark room. Photo detector Field=1 50 cm LCD Panel TFT-LCD Module Center of the screen document version 1.0 provided by 8/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION Note 5: Definition of response time: The output signals of photo detector are measured when the input signals are changed from "Full Black" to "Full White" (rising time), and from "Full White" to "Full Black" (falling time), respectively. The response time is interval between the 10% and 90% of amplitudes. Please refer to the figure as below. Tr F % Optical response Tr R 100 90 White Black 10 0 document version 1.0 provided by White 9/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 3. Functional Block Diagram The following diagram shows the functional block of the 17.3 inches Color TFT-LCD Module: document version 1.0 provided by 10/29 www.display-solution.com info@display-solution.com Bulbshode39 Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 4. Absolute Maximum Ratings Absolute maximum ratings of the module are as following: 4.1 Absolute Ratings of TFT LCD Module Item Logic/LCD Drive Voltage Symbol Vin Min -0.3 Max Unit +3.6 [Volt] 4.2 Absolute Ratings of Environment Symbol Min Max Unit Operation Humidity HOP 5 95 [%RH] Storage Humidity HST 95 [%RH] Item Operating Temperature Storage Temperature Note: Maximum Wet- TOP TST 0 -20 5 and no condensation. +70 +70 document version 1.0 provided by [oC] [oC] 11/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 5. Electrical characteristics 5.1 TFT LCD Module 5.1.1 Power Specification Input power specifications are as follows: Symble Parameter Min. Typ. Max. Unit 3.0 3.3 3.6 [Volt] 10% VDD= 5.0V, All Black Pattern At 75Hz, +30% VDD Logic/LCD Drive Voltage IDD Input Current - 1200 1400 [mA] PDD VDD Power - 5 6 [Watt] IRush Inrush Current - - 2000 [A] - - 100 [mV] p-p VDDrp Allowable Logic/LCD Drive Ripple Voltage Condition VDD= 5.0V, All Black Pattern At 75Hz , Note 1 Note 2 VDD= 3.3V, All Black Pattern At 75Hz Note 1: The variance of VDD power consumption is 30%. Note 2: Measurement conditions: +5.0V D6 D5 D2 D1 Q3 AO6402 2 C1 1uF/16V (LCD Module Input) D1 D2 D5 D6 R2 S C3 +12.0V SW MAG-SPST Q3 AO6402 G 1K SW1 VCC G R1 47K (High to Low) Control Signal F1 S VR1 0.01uF/25V 1 47K C2 1uF/25V 3.3V 90% 0V 10% 470 us Vin rising time document version 1.0 provided by 12/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION Symbol Item Min. Typ. Max. Unit Remark VTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold -100 - - [mV] VCM=1.2V Input Differential Voltage 100 400 600 [mV] 1.125 - 1.375 [V] VID VICM Differential Input Common Mode Voltage VTH/VTL=+-100mV 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Note: LVDS Signal Waveform. document version 1.0 provided by 13/29 www.display-solution.com info@display-solution.com bepratu=25 A. norm alcditn,m ndLED operatigIF=10m Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 5.2 Backlight Unit Following characteristics are measured under a stable condition using a inverter at 25. (Room Temperature): Symbol Parameter Min. Typ. Max. VCC Input Voltage 10.8 12 13.4 IVCC Input Current - 0.99 - PVCC Power Consumption - 12 15 FPWM Dimming Frequency 200 - 20K Swing Voltage 3 3.3 5.5 Dimming duty cycle 5 - 100 % LED Forward Current - 100 - [mA] - (3.3) (3.7) [Volt] IF = 100mA, Ta = 0 C - 3.2 3.6 [Volt] IF = 100mA, Ta = 25oC - (3.1) (3.5) [Volt] IF = 100mA, Ta = 70oC - (10.24) 11.52 [Watt] IF VF PLED LED Forward Voltage LED Power Consumption LED Life Time 50,000 - - Unit Remark [Volt] [A] 100% PWM Duty [Watt] 100% PWM Duty [Hz] [Volt] Ta = 25oC o IF=100mA, Ta= 25oC Hrs Note 1: Ta means ambient temperature of TFT-LCD module. Note 2: VCC, IVCC, PVCC are defined for LED backlight.(100% duty of PWM dimming) Note 3: IF, VF are defined for one channel LED. There are four LED channel in back light unit. Note 4: If G173HW01 V0 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced. Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data. Note 6: LED lifetime is definition: brightness is decreased to 50% of the initial value. LED lifetime is restricted under document version 1.0 provided by 14/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 6. Signal Characteristic 6.1 Pixel Format Image Following figure shows the relationship of the input signals and LCD pixel format. 1 2 st nd Pixel 1 st Line 1080 th Lin Pixel 1919 1920 th th Pixel Pixel R G B R G B R G B R G B R G B R G B R G B R G B document version 1.0 provided by 15/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 6.2 The Input Data Format Note1: Normally, DE, VS, HS on EVEN channel are not used. Note2: 8-bit in document version 1.0 provided by 16/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 6.3 Signal Description The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels. PIN # SIGNAL NAME DESCRIPTION 1 RxOIN0- Negative LVDS differential data input (Odd data) 3 RxOIN1- Negative LVDS differential data input (Odd data) 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 RxOIN0+ RxOIN1+ RxOIN2- RxOIN2+ VSS Positive LVDS differential data input (Odd data) Positive LVDS differential data input (Odd data) Negative LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG) Positive LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG) Power Ground RxOCLKIN- Negative LVDS differential clock input (Odd clock) RxOIN3- Negative LVDS differential data input (Odd data) RxOCLKIN+ RxOIN3+ RxEIN0- RxEIN0+ VSS Positive LVDS differential clock input (Odd clock) Positive LVDS differential data input (Odd data) Negative LVDS differential data input (Even data) Positive LVDS differential data input (Even data) Power Ground RxEIN1- Negative LVDS differential data input (Even data) VSS Power Ground RxEIN1+ Positive LVDS differential data input (Even data) RxEIN2- Negative LVDS differential data input (Even data) RxECLKIN- Negative LVDS differential clock input (Even clock) RxEIN2+ RxECLKIN+ RxEIN3- RxEIN3+ VSS VSS VSS VSS Positive LVDS differential data input (Even data) Positive LVDS differential clock input (Even clock) Negative LVDS differential data input (Even data) Positive LVDS differential data input (Even data) Power Ground Power Ground Power Ground Power Ground VDD +3.3V Power Supply VDD +3.3V Power Supply VDD +3.3V Power Supply document version 1.0 provided by 17/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 Note1: Start from left side Connector 1 30 VDD RxOIN0- Note2: Input signals of odd and even clock shall be the same timing. Note3: Please follow PSWG. document version 1.0 provided by 18/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 6.4 Interface Timing 6.4.1 Timing Characteristics Basically, interface timings should match the 1920X1080 / 60Hz manufacturing guide line timing. Note : DE mode only 6.4.2 Timing Diagram document version 1.0 provided by 19/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 6.5 Power ON/OFF Sequence VDD power and lamp on/off sequence is as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power Sequence Timing Power Sequence Timing Parameter Min. T1 0.5 T3 200 T5 10 T7 0 T2 0 T4 0.5 T6 10 T8 10 T10 110 T12 0 T9 - T11 0 T13 500 Value Typ. Max. - 50 - -- 10 - - - - - document version 1.0 provided by 10 - Units - - - ms 10 - 50 10 - 20/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 7. Connector & Pin Assignment Physical interface is described as for the connector on module.These connectors are capable of accommodating the following signals and will be following components. 7.1 TFT LCD Module 7.1.1 Connector Connector Name / Designation Interface Connector / Interface card Manufacturer HRS Type Part Number MDF76TW-30S-1H Mating Type Part Number MDF76-30P-1C 7.1.2 Pin Assignment Pin# Signal Name 1 RxOIN0- 5 RxOIN2- 3 7 9 RxOIN1VSS RxOCLKIN+ 11 RxOIN3+ 15 RxEIN1- 13 17 19 21 23 25 27 29 RxEIN0+ Pin# Signal Name 2 RxOIN0+ 6 RxOIN2+ 4 RxOIN1+ 8 RxOCLKIN- 12 RxEIN0- 10 14 16 RxOIN3- VSS RxEIN1+ VSS 18 RxEIN2- RxECLKIN+ 22 RxEIN3- VSS 26 VSS VDD 30 VDD RxEIN2+ RxEIN3+ VSS 20 24 28 RxECLKINVSS VDD document version 1.0 provided by 21/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 7.2 Backlight Unit Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components. 7.2.1 Connector Connector Name / Designation Lamp Connector / Backlight lamp Manufacturer HRS Type Part Number DF14A-6P-1.25H Mating Type Part Number DF14-6S-1.25C 7.2.2 Pin Assignment Pin No. Symbol Description Pin2 VLED 12V input Pin1 Pin3 Pin4 Pin5 Pin6 VLED GND GND On/OFF Dimming 12V input GND GND 3.3-5V:ON, 0V:OFF PWM document version 1.0 provided by 22/29 www.display-solution.com info@display-solution.com Product Specification G173HW01 V0 AU OPTRONICS CORPORATION 8. Reliability Test Environment test conditions are listed as following table. Items Temperature Humidity Bias (THB) High Temperature Operation (HTO) Low Temperature Operation (LTO) High Temperature Storage (HTS) Low Temperature Storage (LTS) Required Condition Note Ta= 50, 80%RH, 240hours Ta= 70, 240hours Ta= 0, 240hours Ta= 70, 240hours Ta= -20, 240hours Vibration Test (Non-operation) Acceleration: 1.5 G Wave: Random Frequency: 10 - 200 - 10 Hz Sweep: 30 Minutes each Axis (X, Y, Z) Shock Test (Non-operation) Acceleration: 50 G Wave: Half-sine Active Time: 20 ms Direction: X, Y, Z (one time for each Axis) Drop Test Height: 60 cm, package test Thermal Shock Test (TST) ESD (Electro-Static Discharge) 1 -20/30min, 60/30min, 50 cycles Contact Discharge: 8KV, 150pF(330 ) 1sec, 8 points, 25 times/ point. 2 Air Discharge: 15KV, 150pF(330 ) 1sec 8 points, 25 times/ point. Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change. A cycle of rapid temperature change consists of varying the temperature from -20 to 60, and back again. Power is not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. Note 2: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost. Self-recoverable. No hardware failures. document version 1.0 provided by 23/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 9. Shipping Label Unit: mm document version 1.0 provided by 24/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 10. Packing Form 10.1 Packaging material FILM PROTECT BAG ANTI-STATIC TAPE TAPE CREPED PAPER PACKING CARTON LABEL SPEC LABEL CARTON. CUSHION PACKING 10.2 External packaging material required Carton : 524mm*321mm*360mm, weight (carton + cushion): 1250g document version 1.0 provided by 25/29 www.display-solution.com info@display-solution.com Product Specification AU OPTRONICS CORPORATION G173HW01 V0 Pallet : 1140mm*980mm*140mm Stretch film : 500mm (W)*300M (L) Corner angle : L type fiber board PET band : 19mm (W) Label : 220mm*200mm 10.3 Palletizing sequence Shipping by air Shipping by sea pcs / box box / layer layer / pallet pcs / pallet 10 2*3 3 180 10 2*3 document version 1.0 provided by 3 180 26/29 www.display-solution.com info@display-solution.com provided by www.display-solution.com info@display-solution.com document version 1.0 10.4 Packing instruction AU OPTRONICS CORPORATION Product Specification 27/29 G173HW01 V0 provided by www.display-solution.com info@display-solution.com document version 1.0 11. Outline Drawing AU OPTRONICS CORPORATION Product Specification 28/29 G173HW01 V0 provided by www.display-solution.com info@display-solution.com document version 1.0 AU OPTRONICS CORPORATION Product Specification 29/29 G173HW01 V0