Ordering number:ENN575D PNP/NPN Epitaxial Planar Silicon Transistors 2SB764/2SD863 Voltage Regulator, Relay Lamp Driver Electrical Equipment Applications Package Dimensions unit:mm 2006B [2SB764/2SD863] 6.0 5.0 8.5 4.7 14.0 6.0 3.0 0.5 0.6 0.5 0.5 1 : Emitter 2 : Collector 3 : Base SANYO : MP 1 2 3 ( ) : 2SB764 Specifications 1.45 1.45 Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Symbol Conditions Ratings Unit VCBO VCEO (-)60 V (-)50 V VEBO IC (-)5 V (-)1 A Collector Current (Pulse) ICP (-)2 A Collector Dissipation PC 0.9 W 150 C -55 to +150 C Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Junction Temperature Tj Storage Temperature Tstg Electrical Characteristics at Ta = 25C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(-)50V, IE=0 (-)1 A Emitter Cutoff Current IEBO VEB=(-)4V, IC=0 (-)1 A DC Current Gain hFE1 hFE2 VCE=(-)2V, IC=(-)50mA 60* VCE=(-)2V, IC=(-)1A VCE=(-)10V, IC=(-)50mA 30 Gain-Bandwidth Product Output Capacitance fT Cob VCB=(-)10V, f=1MHz 320* 150 MHz (20) pF 12 pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 90503TN (KT)/91098HA (KT)/4107KI/3085MW, TS No.575-1/4 2SB764/2SD863 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) IC=(-)500mA, IB=(-)50mA Base-to-Emitter Saturation Voltage VBE(sat) IC=(-)500mA, IB=(-)50mA Collector-to-Base Breakdown Voltage Ratings Conditions Collector-to-Emitter Breakdown Voltage V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= Emitter-to-Base Breakdown Votage V(BR)EBO min typ Unit max (-0.2) (-0.7) V 0.15 0.5 V (-)0.85 (-)1.2 V (-)60 V (-)50 V (-)5 V IE=(-)10A, IC=0 * : The SB764/2SD863 are classified by 50mA hFE as follows : Rank D E F hFE 60 to 120 100 to 200 160 to 320 IC -- VCE IC -- VCE 1000 --6mA --600 --4mA --3mA --400 --2mA --200 --1mA IB=0 0 0 --2 --4 --6 --10 Collector Current, IC - mA --6mA --4mA --400 --2mA --200 IB=0 0 --0.6 8m 4 6 8 --1.0 2SD863 A 10mA 6mA 600 4mA 400 2mA 200 IB=0 0 0.2 0.4 0.6 0.8 1.0 Collector-to-Emitter Voltage, VCE - V ITR08347 VCE=2V 12 ITR08346 20m 800 --1.2 IC -- VBE 10 IC -- VCE 0 --0.8 Collector-to-Emitter Voltage, VCE - V 1.2 ITR08348 hFE -- IC 1000 VCE=2V 5 DC Current Gain, hFE 1000 800 764 400 2SB 863 600 2SD Collector Current, IC - mA IB=0 2 A 20m --600 1200 1mA Collector-to-Emitter Voltage, VCE - V -- --0.4 200 1000 --1 --0.2 2mA ITR08345 0mA 0 400 0 Collector Current, IC - mA mA --5 0 -- 3mA 2SB764 A --800 600 --12 IC -- VCE m 30 4mA 0 --8 Collector-to-Emitter Voltage, VCE - V --1000 A 6m 800 50mA Collector Current, IC - mA --8mA 2SD863 A 0 --1 --800 Collector Current, IC - mA mA A 10m A 2SB764 30m --1000 3 2 2SD863 2S 100 B7 64 5 3 200 2 (For PNP, minus sign is omitted.) 0 0 0.2 0.4 (For PNP, minus sign is omitted.) 0.6 0.8 Base-to-Emitter Voltage, VBE - V 1.0 1.2 ITR08349 10 1.0 2 3 5 10 2 3 5 100 2 3 Collector Current, IC - mA 5 1000 2 3 ITR08350 No.575-2/4 2SB764/2SD863 Cob -- VCB 100 Gain-Bandwidth Product, fT - MHz Output Capacitance, Cob - pF 7 5 3 2SB 764 2 2SD 863 10 7 5 VCE=10V 2 100 (For PNP, minus sign is omitted.) 3 1.0 2 3 5 7 3 5 3 2 2 10 3 5 7 100 2 ITR08352 Collector Current, IC - A D8 7 5 3 2 5 7 1000 Collector Current, IC - mA 2 3 ITR08353 IC=1A 1.0 7 5 DC 3 2 op era tio 0.1 7 5 n 3 2 0.01 7 5 (For PNP, minus sign is omitted.) Single pulse ICP=2A s 63 2S 0.1 3 7 0m 2S 2 5 10 6 B7 7 100 3 s 1m s m 10 4 3 2 2 1s 7 5 5 2 5 1.0 3 3 Collector Current, IC - mA 2 2 63 D8 2S 5 ASO 3 Collector-to-Emitter Saturation Voltage, VCE (sat) - V 100 ITR08351 IC / IB=10 5 7 10 7 10 1.0 7 VCE(sat) -- IC 0.01 64 B7 2S (For PNP, minus sign is omitted.) 2 10 Collector-to-Base Voltage, VCB -- V 5 f T -- IC 3 f=1MHz (For PNP, minus sign is omitted.) 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Emitter Voltage, VCE - V 7 100 ITR08354 PC -- Ta 1000 Collector Dissipation, PC - mW 2SB764 / 2SD863 800 600 400 200 0 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 ITR08355 No.575-3/4 2SB764/2SD863 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2003. Specifications and information herein are subject to change without notice. PS No.575-4/4