CURRENT 3.0 Amperes VOLTAGE 50 to 1000 Volts 1N5400 THRU 1N5408 Features * The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 * Construction utilizes void-free molded plastic technique * High surge current capability * 3.0A operation at TL=70 with no thermal runaway * Typical IR less than 0.1A * High temperature soldering guaranteed : 250/10 seconds, 0.375"(9.5mm) lead length, 5lbs.(2.3kg) tension DO-201AD 0.210(5.3) 0.188(4.8) DIA. 1.0(25.4) MIN. 0.375(9.5) 0.285(7.2) Mechanical Data * Case : JEDEC DO-201AD molded plastic body * Terminals : Lead solderable per MIL-STD-750, method 2026 * Polarity : Color band denotes cathode end * Mounting Position : Any * Weight : 0.042 ounce, 0.19 gram 1.0(25.4) MIN. 0.042(1.1) 0.037(0.9) DIA. Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols 1N 5400 1N 5401 1N 5402 1N 5404 1N 5406 1N 5407 1N 5408 Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage to TA=105 VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375"(9.5mm) lead length TL=105 I(AV) 3.0 Amps Peak forward surge current 8.3ms half sine wave superimposed on rated load (JEDEC method) IFSM 200.0 Amps Maximum instantaneous forward voltage at 3.0A VF 1.1 Volts Maximum reverse current at rated DC blocking voltage TA=25 TA=100 IR 10.0 300.0 A RJA 20.0 /W Typical junction capacitance (Note 1) CJ 35.0 pF Maximum DC Blocking Voltage Temperature TA +150.0 TJ TSTG -50 to +175 Typical thermal resistance (Note 2) Operating and Storage temperature Range Notes: (1) Measured at 1MHz and applied reverse voltage of 4.0V DC. (2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted RATINGS AND CHARACTERISTIC CURVES 1N5400 THRU 1N5408 FIG.2-TYPICAL INSTANTANEOUS FORWARD VOLTAGE.(V) 4 100 3 30 2 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) lead length 1 INSTANTANEOUS FORWARD CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 0 0 25 50 75 100 125 150 175 LEAD TEMPERATURE ( ) FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 10 3 1 0.1 TJ=25 PULSE WIDTH=300S 1% DUTY CYCLE 0.3 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 200 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) NON-REPETITIVE 50 FIG.4-TYPICAL REVERSE CHARACTERISTICS REPETITIVE 10 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE(pF) 100 INSTANTANEOUS REVERSE CURRENT (A) PEAK FORWARD SURGE CURRENT (AMPERES) 100 1.0 0.1 TJ=25 0.01 TJ=25 1 1 10 REVERSE VOLTAGE. VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 0.1 0 100 120 140