1N5400 THRU 1N5408
Features
Mechanical Data
· The plastic package carries Underwrites Laboratory
Flammability Classification 94V-0
· Construction utilizes void-free molded plastic technique
· High surge current capability
· 3.0A operation at T
L
=70℃with no thermal runaway
· Typical I
R
less than 0.1μA
· High temperature soldering guaranteed : 250℃/10 seconds,
0.375"(9.5mm) lead length, 5lbs.(2.3kg) tension
Maximum Ratings And Electrical Characteristics
· Case : JEDEC DO-201AD molded plastic body
· Terminals : Lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.042 ounce, 0.19 gram
(Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Notes:
(1) Measured at 1MHz and applied reverse voltage of 4.0V DC.
(2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted
CURRENT 3.0 Amperes
VOLTAGE 50 to 1000 Volts
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage to TA=105℃
Volts
Peak forward surge current 8.3ms half sine
wave superimposed on rated load
(JEDEC method)
VDC
Maximum average forward rectified current
0.375"(9.5mm) lead length TL=105℃
Maximum instantaneous forward voltage
at 3.0A
VRRM Volts
Symbols Units
1.1VF
VRMS
3.0
Amps
Amps
200.0IFSM
TJ
TSTG
300.0
-50 to +175 ℃
Volts
Maximum reverse current
at rated DC blocking voltage
Typical thermal resistance (Note 2)
Typical junction capacitance (Note 1)
Operating and Storage temperature Range
50
1N
5400
35
50
10.0
20.0
Volts
μA
℃/W
pF
I(AV)
IR
RθJA
TA=25℃
TA=100℃
35.0
CJ
Maximum DC Blocking Voltage Temperature ℃+150.0
TA
100
1N
5401
70
100
200
1N
5402
140
200
400
1N
5404
280
400
600
1N
5406
420
600
800
1N
5407
1N
5408
560
800
1000
700
1000
Dimensions in inches and (millimeters)
DO-201AD
1.0(25.4)
MIN.
1.0(25.4)
MIN.
0.375(9.5)
0.285(7.2)
0.042(1.1)
0.037(0.9)
DIA.
0.210(5.3)
0.188(4.8)
DIA.
FIG.1-FORWARD CURRENT DERATING CURVE
1000 25 1751501257550
4
0
1
3
2
LEAD TEMPERATURE ( ℃)
AVERAGE FORWARD CURRENT AMPERES
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
0.375"(9.5mm) lead length
FIG.3-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
101 100
100
0
50
200
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE
CURRENT (AMPERES)
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
NON-REPETITIVE
REPETITIVE
FIG.5-TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE. VOLTS
JUNCTION CAPACITANCE(pF)
10
1100
0.1
T
J
=25℃
1
10
100
200
TJ=25℃
PULSE WIDTH=300
μ
S
1% DUTY CYCLE
1.40.6 0.8 1.61.21.0 1.80.4
FIG.2-TYPICAL INSTANTANEOUS FORWARD
VOLTAGE.(V)
INSTANTANEOUS FORWARD CURRENT(AMPERES)
30
0.01
0.1
10
1
100
0.3
3
INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
FIG.4-TYPICAL REVERSE CHARACTERISTICS
0.01
0.1
10
1.0
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
INSTANTANEOUS REVERSE CURRENT (
μA
)
1000 20 140120806040
T
J
=25℃
RATINGS AND CHARACTERISTIC CURVES 1N5400 THRU 1N5408