3 Privacy Filter ALCF-P ABR0 Specifications
Description This document provides customer specifications for Advanced Light
Control Film ALCF-P ABR0
Applications ALCF-P ABR0 is a microreplicated film that controls the amount of
light that passes through the film at high angles. At small angles, close to perpendicular to
the surface of the privacy filter, the majority of the incident light is transmitted through the
privacy filter. At angles outside of the 60 degree viewing angle, light is absorbed by the
black louvers providing the user with privacy.
Material Outer Substrates: Polycarbonate
Louver Layer: Acrylic Resin and Carbon Black
Typical Properties
Property (Test Method) Typical Value
Viewing Angle 60° ± 4°
Louver Angle 0° ± 2°
Color 1931 CIE x Color Coordinate: 0.317 ± 0.02
1931 CIE y Color Coordinate: 0.335 ± 0.02
Nominal thickness 0.53 ± 0.08 mm
Heat resistance 60°C, 15% relative humidity, 7 days
Humidity resistance 40°C, 85% relative humidity, 7 days
Thermal shock resistance -35° to 60° C for 10 total cycles at 11 hours
per cycle
Unless otherwise noted, all tests are performed at room temperature
Viewing Angle Definition
• Viewing Angle – The sum of the angles (θ and φ), measured from the angle of
maximum transmission, at which only 5% of the maximum transmission is transmitted
through the film.
Data Sheet
December, 2011
Page 1 of 2
Protective Liners ALCF-P ABR0 Privacy Filter kits have protective liners on
both sides of the glossy privacy film to protect during shipping, handling, or laminating.
Availability For availability, please contact our customer service group at 1-800-
553-9215 or visit our website at 3mprivacyfilter.com
Important Notice
The following is made in lieu of all warranties, express or implied, including any implied warranties of merchantability or
fitness for a particular purpose.
3M warrants that, at the time of shipment, product will meet 3M’s published specification or that specification agreed in writing between
3M and purchaser. Should product not meet specifications at time of shipment, 3M will replace or refund the purchase price of such
quantity of the product found not to meet specifications. Purchaser shall determine the suitability of the 3M Product for purchaser’s
application. 3M shall not be liable under any legal theory, including in contract or in tort, for any injury, loss, or damage,
whether direct, indirect, incidental, special or consequential, arising out of the use of or the inability to use the product.
The warranties and remedies set forth herein are purchaser’s sole and exclusive warranties and remedies.
3M is a trademark of 3M Company
3
Mobile Interactive Solutions Division
Bldg. 235-1E-54/3M Center
St. Paul, MN 55144-1000
800-553-9215
www.3mprivacyfilter.com
Page 2 of 2
