e3
DS26014 Rev. 4 - 2 1 of 3 PR3001 - PR3005
www.diodes.com ã Diodes Incorporated
PR3001 - PR3005
3.0A FAST RECOVERY RECTIFIER
Features
DO-201AD
Dim Min Max
A25.40 ¾
B7.20 9.50
C1.20 1.30
D4.80 5.30
All Dimensions in mm
A A
B
C
D
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
·Diffused Junction
·Fast Switching for High Efficiency
·Surge Overload Rating to 150 A Peak
·Low Reverse Leakage Current
·Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
·Case: DO-201AD
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish - Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
·Polarity: Cathode Band
·Marking: Type Number
·Ordering Information: See Page 3
·Weight: 1.12 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol PR
3001
PR
3002
PR
3003
PR
3004
PR
3005 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
VRRM
VRWM
VR
50 100 200 400 600 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 V
Average Rectified Output Current
(Note 1) @ TA = 90°CIO3.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM 150 A
Forward Voltage @ IF = 3.0A VFM 1.2 V
Peak Reverse Current @ TA = 25°C
at Rated DC Blocking Voltage (Note 5) @ TA = 100°CIRM 5.0
100 mA
Reverse Recovery Time (Note 3) trr 150 250 ns
Typical Total Capacitance (Note 2) CT50 pF
Typical Thermal Resistance Junction to Ambient RqJA 15 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF =0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
5. Short duration pulse test used to minimize self-heating effect.
DS26014 Rev. 4 - 2 2 of 3 PR3001 - PR3005
www.diodes.com
0
1
2
3
4
0 25 50 75 100 125 150 175
I , AVERAGE FORWARD RECTIFIED
(AV)
CURRENT (A)
T , AMBIENT TEMPERATURE (°C)
A
Fig. 1 Forward Derating Curve
Single phase half wave
Resistive or Inductive load
0.01
0.1
1.0
10
0.6 0.8 1.0 1.2
I , INSTANTANEOUS FOWRARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
Fig. 2 Typical Forward Characteristics
o
T = 25 C
j
10
100
200
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
50V DC
Approx
Oscilloscope
(Note 1)
Pulse
Generator
(Note 2)
Device
Under
Test
trr
Set time base for 50/100 ns/cm
+0.5A
0A
-0.25A
-1.0A
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
(+)
(+)
(-)
(-)
1
10
100
1 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
R
Fig. 4 Typical Total Capacitance
T = 25°C
j
f = 1.0MHz
PR3001 - PR3004
PR3005
Notes: 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf.
DS26014 Rev. 4 - 2 3 of 3 PR3001 - PR3005
www.diodes.com
Ordering Information
Device Packaging Shipping
PR3001-B DO-201AD 500/Bulk
PR3001-T DO-201AD 1.2K/Tape & Reel, 13-inch
PR3002-B DO-201AD 500/Bulk
PR3002-T DO-201AD 1.2K/Tape & Reel, 13-inch
PR3003-B DO-201AD 500/Bulk
PR3003-T DO-201AD 1.2K/Tape & Reel, 13-inch
PR3004-B DO-201AD 500/Bulk
PR3004-T DO-201AD 1.2K/Tape & Reel, 13-inch
PR3005-B DO-201AD 500/Bulk
PR3005-T DO-201AD 1.2K/Tape & Reel, 13-inch
(Note 6)
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.