KR series Power rocker switches Distinctive features Attractive rugged rocker switch Removable actuator Up-to-date rocker design Easy to stock Easy to customize Smooth curves Wide choice of colours and symbols Laser etched symbols on illuminated versions High performance LEDs Long life expectancy An array of colours and voltages Optional panel seal High performance ultrasonic welding Protection against dust and the effects of continuous immersion under pressure. Integrated resistors Easy electrical connection Robust roller contact Very long life expectancy Many electrical functions available Large variety of terminal options Up to 10 terminals Screw, solder lug and quick-connect APEM will be happy to develop custom product solutions. Please contact us with your requirements. APEM www.apem.com 3 KR series Power rocker switches Specifications Unique rocker design Wide choice of colours Laser etched symbols Illuminated or non-illuminated Optionally sealed to IP68 ELECTRICAL SPECIFICATIONS MATERIALS * Currrent/voltage rating with resistive load : - Silver contacts (A) : 5A 24VDC, 100.000 cycles 10A 24VDC, 10.000 cycles (terminals 6.35 x 0.8 only) - Gold plated contacts (D) : 20mA 12V, 150.000 cycles * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals * Mechanical life :150.000 cycles min. * Case : PA 6-6 * Actuator : ABS * Bezel : PA 6-6 * Terminals : brass, silver plated * Contacts : silver (A) or silver, gold plated (D) * Contact roller : brass, nickel plated SEALING ENVIRONMENTAL SPECIFICATIONS * Degree of protection of sealed versions : frontal sealing to IP68 according to IEC 60529 (submersion under 1 meter of water for more than 30 minutes) * Salt spray resistance : 96 hours according to IEC 512-6, test 11f * Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6 * Operating temperature : -40C to +85C Sealing is optional. To order a sealed product, complete the appropriate box of ordering format on the following pages. DIMENSIONS Flat seal 46.50 (1.830) 12.00 (.472) 50.00 Max (1.969 Max) 35.50 (1.398) 24.00 (.944) Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. 11.00 (.433) U2282 25.00 (.984) Tolerance : The general tolerance for dimensions in this brochure is 0,3 (.012). Overall dimension tolerance is 0,5 (.020). 47.00 (1.850) Packaging unit : 40 pieces Dimensions, specifications and data shown in this brochure are subject to change without notice. 4 www.apem.com FICHIER: CKR46DT-P4 ECHELLE: 0.625 APEM KR series Power rocker switches Selection guide HOW TO ORDER * To order a complete product, fill in all the boxes of the following order guide. * To order case only (without actuator), finish your order number with the LED wiring code. * To order actuator only (without case), begin the order number with code KRR, then follow the order format from "actuator type" until the end of the options. + LEDS CASE KR Side A Electrical functions SERIES 1 4 4-1R 5 6 7 8 9 Poles 3 Single pole 4 Double pole ON ON ON MOM ON MOM ON ON Sealing Contacts OFF ON ON ON MOM ON ON OFF MOM OFF MOM OFF ON Silver Gold plated A D Terminals Terminals (continued) Screw 0 6 terminals with barrier Solder lug/quick-connect 2 6 terminals with barrier 4 6 terminals w/o barrier A 10 term. with barrier B 10 term. w/o barrier C 10 terminals for use with connector U2292 Quick-connect 6,35x0,8 3 6 terminals with barrier Quick-connect 6,35x0,8 5 6 terminals w/o barrier D 10 term. with barrier E 10 term. w/o barrier F 10 term. for use with connector U2292 Quick-connect 2,8x0,8 G 10 term. with barrier H 10 term. w/o barrier J 10 terminals for use with connector U2282 ACTUATOR Type Colour 2 Blue Dark blue Black Green Grey Yellow Red ON Ivory OFF Orange Aluminium ONbright OFF 3 4 1 1/4 2 3 4 5 6 7 9 A 4 5 6 4 ON 5 1 NOTICE None LED 6V red LED 6V green LED 6V yellow LED 6V blue LED 6V white LED 12V red LED 12V green LED 12V yellow LED 12V blue LED 12V white LED 24V red LED 24V green LED 24V yellow LED 24V blue LED 24V white 1 2 4 N 5 See diagrams page 9. 4 ON O 5 1 1 2 ON 3 4 2 3 1 1 2 ON 3 4 2 3 3 1 ON 3 4 3 2 OFF 3 E 5 3 5 2 6 6 1 6 5 OFF 4 5 ON 3 4 ON 2 CKRMA1-A 1 4 OFF OFF 2 6 5 3 SOFF 5 6 6 OFF 5 OFF 6 Area B Symbols OFF 2 6 ON 5 6 1 3 Area M Orientation ON 1 6 6 5 4 4 OFF 2 6 5 1 6 ON 4 5 4 6 OFF 3 ON 2 OFF 3 ON 2 CKRMA1-A 1 Symbols : see page 31. Accessories : see page 34. CKRMA1-A 1 OFF 2 OFF 6 X A B C M R D E F N S J K L P T Wiring ACTUATOR MARKING Area A 1 For non-illuminated application 2 For illuminated application LEDS No Yes X K Side B 1 5 ON 4 OFF 3 ON 2 CKRMA1-A 1 : please note that not all combinations of above numbers are available. Refer to the following pages for further information. FICHIER: CKRMA ECHELLE: 0.625 indice A le 17/07/06 APEM www.apem.com 5 FICHIER: CKRMA ECHELLE: 0.625 indice A le 17/07/06 KR series Power rocker switches Case * To order case only (without rocker), finish your order number with the LED wiring code. CASE + LEDS MODEL STRUCTURE 2-3 5-6 Single pole KR31 Double pole KR41 KR44* KR44-1R* KR45 KR46 KR47 KR48 KR49 KR35 KR36 KR37 KR38 KR39 Contact area 1-2 4-5 ON ON ON MOM ON MOM ON ON OFF ON ON ON MOM ON ON OFF MOM OFF MOM OFF ON Bottom view Contact & LED area LED area * Function 4 : single pole in double pole case 10 terminal version 6 terminal version ELECTRICAL FUNCTIONS AND CONNECTIONS In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is represented. For single pole models, only terminals 1, 2 and 3 are to be considered (not terminals 6, 5, 4). Positions 3 Function 1 * KR31-KR41 Function 5 KR35-KR45 Function 6 KR36-KR46 Function 7 KR37-KR47 2 1 3 2 1 6 5 3 3 2 Positions 1 3 2 1 3 2 1 4 6 5 4 2 1 3 2 1 6 5 4 6 5 4 3 2 1 3 2 1 6 5 4 6 5 4 3 2 1 3 2 1 3 2 1 6 5 4 6 5 4 6 5 4 CKRFUN1-A 3 Function 8 KR38-KR48 Function 9 KR39-KR49 Function 4 KR44 Function 4-1R KR44-1R * Function 1 only available for 6 terminal versions. CKRFUN1567-A 6 x = w/o terminal o = with terminal = momentary www.apem.com 2 1 3 2 3 2 1 3 6 5 4 6 5 3 2 1 3 6 5 4 3 2 6 1 3 2 1 CKRFUN1-A 2 1 3 2 1 4 6 5 4 2 1 3 2 1 6 5 4 6 5 4 1 3 2 1 3 2 1 5 4 6 5 4 6 5 4 3 2 1 3 2 1 3 2 1 6 5 4 6 5 4 6 5 4 CKRFUN894-A APEM KR series Power rocker switches Case TERMINALS CASE + LEDS Solder lug / quick-connect Screw Normalized quick-connect 6,35x0,8 O3.00x0.50 SI (.118DIAx0.50 IS) o1.50 (.059DIA) O3.10 (.122DIA) 2.80x0.80 (.110x.031) 3 5 6 terminals with barrier 6 terminals w/o barrier D E F 10 terminals with barrier 10 terminals w/o barrier 10 terminals for use with connector U2292 G 10 terminals with barrier H 10 terminals w/o barrier J 10 terminals for use with connector U2282 6 Terminals are marked on the case. The drawings show the maximum possible number of terminals. 3 5.85 (.230) 7.10 (.280) 11.30 (.445) 11.30 (.445) 9.10 (.358) 1 5 6 terminals with barrier 6 terminals w/o barrier 10 terminals with barrier 10 terminals w/o barrier 10 terminals for use with connector U2292 6.85 (.269) O1.20 (.047DIA) 6.35x0.80 (.250x.031) 6.35x0.80 (.25x.031) 2 2 4 A B C 6 term. with barrier 4 0 0.80 (.031) 4.50 (.177) 6.35 (.25) Normalized quick-connect 2,8x0,8 6 terminal version 10 terminal version CONTACT MATERIALS CASE A D APEM + LEDS Silver Silver, gold plated www.apem.com 7 KR series Power rocker switches Case - LEDs SEALING CASE + LEDS Optional seal (K version) X No sealing K IP68 (switch assembled on panel) Ultrasonic welding of frame to case is standard on all versions. The ultrasonic welding and the optional panel seal prevent water and dust from introducing into the switch housing. Optional seal (K version) The product shall be installed professionally. Test conditions available on request. LEDS CASE + LEDS Side A Side B Complete each enlarged box with one of the codes listed below. X Without LED Side A Red Green Yellow Blue White 6VDC A B C M R 7 8 7 8 7 8 7 8 12VDC D E F N S 4 1 4 1 4 1 4 1 24VDC J K L P T 5 2 5 2 5 2 5 2 6 3 6 3 6 3 6 3 9 10 9 10 9 10 9 10 LED consumption : 20mA @ nominal voltage (25C) Other illumination solutions : on request. Side B CKRIL-B FICHIER: CKRIL-P8 ECHELLE: 0.625 indice B le 26/07/07 8 www.apem.com APEM KR series Power rocker switches Case - LEDs The LED wiring diagram is shown on the case. WIRING + LEDS CASE * For 6 terminal versions 1 4 1 + 2 5 2 3 6 3 4 LED connected to the load 1 - 5 + 6 4 2 5 3 6 1 + 4 5 2 - + 1 - - 6 3 A (standard) 4 2 5 3 6 - + 1 4 5 2 + - + 2 6 3 1 B 1 4 5 3 6 1 4 - + 4 2 5 3 6 - C CKGRLA-B 1 Note : If not available, terminals are added to connect the LED. 5 2 + 1 4 6 3 - D - for function 1 (on-off) with LED on side A 4 2 5 3 6 - + 1 4 2 + - 3 - 5 2 5 6 3 6 1 4 2 + - 3 + 5 6 CKRRLF-A E F CKGRLD-B * For 10 terminal versions + 8 7 1 4 - Independent LED or integrated functions 8 7 1 4 + 8 7 1 4 2 5 2 5 2 5 3 6 3 6 3 6 10 9 + 10 9 - + 10 9 To have independent LEDs. - G (standard) CKRRLG-A R1 R2 + 8 7 1 4 - + R1 8 7 8 7 1 4 1 4 2 5 2 5 2 5 3 6 3 6 3 6 10 9 10 R2 9 - R2 10 - To obtain 2 symbol illumination levels (night illumination when OFF and higher illumination when ON). + Dotted line = external wiring, continuous line = internal wiring 9 R1 H Available in Single Pole only, with H and J quick-connect terminals. CKRRLH-A 8 7 1 4 2 5 3 6 10 9 To have a polarity inversion (typical application : fan motor). Dotted line = internal wiring, continuous line = internal wiring I Power supply betweeen 2 and 5 - Load between 1 and 4 or 3 and 6. CKRRLI-Aterminals. Available with H and J quick-connect APEM Please contact us for other wiring solutions. www.apem.com 9 KR series Power rocker switches Actuator - Marking To order actuator only (without case), begin the order number with code KRR, then follow the order format from "actuator type" until the end of the options. ACTUATOR TYPE ACTUATOR 1 2 For non-illuminated application For illuminated application Other rocker design : on request. ACTUATOR COLOUR ACTUATOR Code Colour Code Colour Code Colour Blue 4 Grey 9 Orange Dark blue 5 Yellow 2 Black 6 Red A Aluminium bright 3 Green 7 Ivory 1 1/4 Note : colour 7 not available on illuminated versions. A soft-touch varnish can be added. Consult us. If no marking required, leave box blank. MARKING ORIENTATION ACTUATOR MARKING 4 ON 5 1 1 2 ON 3 4 2 3 3 N 6 5 4 OFF OFF 2 OFF 6 6 6 5 O 1 5 ON S 4 OFF 3 ON 2 CKRMA1-A 1 E Other orientations : on request 10 www.apem.com APEM KR series Power rocker switches Marking - Mounting SYMBOLS ACTUATOR MARKING A M B Available symbols : see page 31. Marking colour White marking for illuminated rockers (laser etching) and non-illuminated black rockers (pad printing). Black marking for non-illuminated colour rockers (pad printing). Other : on request. Laser etching resistance - Water and petrol resistant acccording to EN61058-1 - Tear resistant (cross-cut test) according to NF ISO 2409 : class 0 - UV resistant according to ISO 4892-2 14.00 (.551) R:20.00 (.787 R) R:6.00 (.236 R) 7.70 (.303) 20.30 (.799) 87 .00 20.20 (.795) 6.40 (.252) Marking area For illuminated versions. The symbol will be included in the hatched area. Marking in M are : on request. CKRZL1-A SWITCH PANEL CUT-OUT MATRIX MOUNTING Panel thickness : 0,8 mm to 4,6 FICHIER: mm CKRZL-P11 25.00 mini (.984 min.) 4.00 (.157) ECHELLE: 0.625 Recommended panel thickness : indice A between 2 mm and 3,5 mm le 26/07/07 47.00 mini (1.850 min.) 10.20 (.402) 36.80 0/+0.3 (1.449 0/+.012) 21.08 0/+0.3 (.830 0/+.012) CKRDE3-C APEM www.apem.com 11