AZ420
1/28/14
B. SENSITIVE DC VOLTAGE VERSION (Pickup 250 mW)
COIL SPECIFICATIONS ORDER NUMBER
Nominal Max. Coil Must Plug-in/
Coil Continuous Resistance Operate Solder PC Terminals
VDC VDC ± 10% VDC Terminals
3 6 20 2.25 AZ431–V19–*— AZ439–V19–*—
6 13 80 4.5 AZ431–V13–*— AZ439–V13–*—
12 26 320 9.0 AZ431–V09–*— AZ439–V09–*—
24 50 1,200 18.0 AZ431–V60–*— AZ439–V60–*—
48 68 5,200 36.0 AZ431–V045–*— AZ439–V045–*—
RELAY ORDERING DATA — SIX POLE
A. STANDARD DC COIL VOLTAGE VERSION
COIL SPECIFICATIONS ORDER NUMBER
Nominal Max. Coil Must Plug-in/
Coil Continuous Resistance Operate Solder PC Terminals
VDC VDC ± 10% VDC Terminals
3 4.5 11 2.25 AZ431–22–*— AZ439–22–*—
6 7 25 4.5 AZ431–18–*— AZ439–18–*—
12 14 90 9.0 AZ431–13–*— AZ439–13–*—
18 22 230 13.0 AZ431–10–*— AZ439–10–*—
20 26 360 16.0 AZ431–09–*— AZ439–09–*—
24 29 430 18.0 AZ431–80–*— AZ439–80–*—
26 34 600 21.0 AZ431–08–*— AZ439–08–*—
48 59 1,800 36.0 AZ431–06–*— AZ439–06–*—
72 83 3,600 54.0 AZ431–05–*— AZ439–05–*—
115 130 9,000 86.0 AZ431–04–*— AZ439–04–*—
C. SENSITIVE DC CURRENT VERSION (Pickup 250 mW)
COIL SPECIFICATIONS ORDER NUMBER
Nominal Max. Coil Must Plug-in/
Coil Continuous Resistance Operate Solder PC Terminals
VDC VDC ± 10% (mA) Terminals
23 44 1,000 16.0 AZ431–C07–*— AZ439–C07–*—
36 70 2,500 10.0 AZ431–C56–*— AZ439–C56–*—
51 102 5,000 7.2 AZ431–C045–*— AZ439–C045–*—
71 144 10,000 5.0 AZ431–C408–*— AZ439–C408–*—
90 170 15,000 4.2 AZ431–C035–*— AZ439–C035–*— * Contact for Standard DC Voltage version only
(Table A).
** Contact code for Sensitive DC Voltage version only
(Table B) and sensitive DC current version.
† If switching voltage is greater than 30 VDC, special
precautions must be taken. Contact the factory.
Contact Maximum Switching
Material Switched Range at 28
Load VDC or 115
VAC
(Typical)
10LUS
Bifurcated Max. Power:
crossbar contact 56 W or 230 VA
Fine silver/ Max. current: Dry circuit
gold plated 2 Amps to 2 Amps
Max. voltage: 150†
VDC or 300 VAC
1LUS *
Single Max. power:
crossbar contact 100 W or 350 VA
Moveable: Max. current: 1 mA to
fine silver/ 2 Amps 2 Amps
gold plated
Max. voltage: 150†
VDC or 300 VAC
1LUS **
Single contact Max. power:
button 56 W or 230 VA
Fine silver/ Max. current: Low level
gold plated 2 Amps to 2 Amps
Max. voltage: 150†
VDC or 300 VAC
1HUS *
Single Max. power:
crossbar contact 225 W or 870 VA
Moveable: Max. current: 100 mA to
silver cadmium 5 Amps 5 Amps
oxide/gold Max. voltage: 150†
plated VDC or 300 VAC
1HUS **
Single contact Max. power:
button 140 W or 575 VA
Silver cadmium Max. current: 100 mA to
oxide 5 Amps 5 Amps
Max. voltage: 150†
VDC or 300 VAC
CONTACT DATA TABLE
*ORDERING PROCEDURE:
To specify an AZ 431 series relay, combine the basic
part number found in the Order Number section with a
contact code found in the Contact Data Table.
EXAMPLE: AZ431–22–10LUS:
A. Basic number: AZ431–22– indicates six pole, plug-
in/ solder terminals, standard coil, 3 VDC, 11 ohms.
B. Contact code: 10LUS indicates bifurcated crossbar
fine silver/gold plated contacts, Form C, UL and CUR
approved.