date 07/13/2017
page 1 of 4
cui.com
MODEL: PJ-002BH-SMT │ DESCRIPTION: DC POWER JACK
FEATURES
•designed for pick and place
•5 A current rating
•narrow footprint
SPECIFICATIONS
parameter conditions/description min typ max units
rated input voltage 24 Vdc
rated input current 5 A
contact resistance1between terminal and mating plug
between terminal in a closed circuit
50
30
mΩ
mΩ
insulation resistance at 500 Vdc 100 MΩ
voltage withstand at 50/60Hz for 1 minute 500 Vac
insertion/withdrawal force 0.3 3 kg
terminal strength any direction for 10 seconds 500 g
operating temperature -25 85 °C
life 5,000 cycles
ammability rating UL94V-0
RoHS 2011/65/EU
Notes: 1. When measured at a current of less than 100 mA / 1 kHz
2. Add sufx “-TR” to the model number for tape & reel packaging
SOLDERABILITY
parameter conditions/description min typ max units
reel storage at relative humidity <80% 40 °C
reow soldering3see reow prole 255 260 265 °C
drying conditions4parts in reel: bake at 40°C ±5°C for 72 hours
parts removed from reel: bake at 40°C ±5°C for 10 hours
Note: 3. Must reow solder within 72 hours from opening vacuum packaging at a temperature <30°C & relative humidity <60%.
4. When exceeding oor life by >72 hours.
120
50
270
260
250
240
217
180
120
60
70 140 250 340 380 430
60 120 180 240 300 360 420 480
°C
Time (second)
RoHS
For more information, please visit the product page | For information on related products, view External Power Supplies
cui.com
CUI Inc │ MODEL: PJ-002BH-SMT │ DESCRIPTION: DC POWER JACK date 07/13/2017│ page 2 of 4
1
2
3
SCHEMATIC
PCB LAYOUT
TOP VIEW
9.0 0.354
13.8 0.543
1.6 0.063
1.800 0.071
5.00 0.197
9.5 0.374
6.1 0.240
2
11
2.80X2.40
(4 PLCS)
3
5.00 0.197 4.50 0.177
11.0 0.433
0.58314.8
0.0591.50
11.9 0.469
6.5 0.256
+0.03
0.008
-0.1
0.0982.5
0.2566.50
0.3549.00
11.0 0.433
0.2
1.2 0.047
(2 PLCS)
11.1 0.437
6.1 0.240
1
3
1
1.500X1.200
2
9.5
1.7 0.067
0.059
0.374
1.5
12.6 0.496
MATING PLUG
Model
PJ-002BH-SMT ø2.5 mm
Center Pin
Jack Insertion Depth: 8.9 mm
MECHANICAL DRAWING
MATERIAL PLATING
center pin copper nickel
terminal 1 brass silver
terminal 2 copper alloy silver
terminal 3 brass silver
plastic PA6T
(or equivalent)
units: mm[inches]
TOLERANCE:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
For more information, please visit the product page | For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-002BH-SMT │ DESCRIPTION: DC POWER JACK date 07/13/2017│ page 4 of 4
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
techsupport@cui.com
rev. description date
1.0 initial release 10/19/2005
1.01 updated operating temperature 06/20/2011
1.02 updated spec, added jack insertion depth 10/12/2012
1.03 added TR package option 11/28/2012
1.04 updated spec 07/03/2013
1.05 increased voltage rating 05/17/2016
1.06 added storage & drying conditions, and tape & reel packaging 07/13/2017
The revision history provided is for informational purposes only and is believed to be accurate.
REVISION HISTORY
For more information, please visit the product page | For information on related products, view External Power Supplies
