TPD4S009 TPD4S010 www.ti.com................................................................................................................................................................. SLVS817C - MAY 2008 - REVISED MAY 2009 4-CHANNEL ESD SOLUTION FOR HIGH-SPEED DIFFERENTIAL INTERFACE FEATURES 1 * Supports High-Speed Differential Data Rates (3-dB Bandwidth > 4 GHz) * Ultra-low Matching Capacitance Between Differential Signal Pairs * Low 0.8-pF Line Capacitance for Each Data Line to GND * Flow-Through Single-in-Line Pin Mapping for High-Speed Lines Ensures No Additional Board Layout Burden While Placing ESD Protection Chip Near Connector * 2 1 6 D1- D1+ D1- GND D2+ 2 3 5 4 VCC D2- * TPD4S009...DGS PACKAGE (TOP VIEW) TPD4S009...DBV OR DCK PACKAGE (TOP VIEW) D1+ * * * IEC 61000-4-2 (Level 4) System-Level ESD Compliance 2.5-A Peak Pulse Current (8/20-s Pulse) Ioff Feature for the TPD4S009 Industrial Temperature Range: -40C to 85C Space-Saving Package Options GND 1 10 2 3 9 8 TPD4S010...DQA PACKAGE (TOP VIEW) N.C. D1+ 1 10 TPD4S009...DRY PACKAGE (TOP VIEW) N.C. D1+ 1 6 5 VCC 4 D2- N.C. D1- 2 9 N.C. GND 2 VCC GND 3 8 GND D2+ 3 4 7 N.C. 5 6 N.C. D2+ 4 7 N.C. D2+ D2- 5 6 N.C. D2- D1- DESCRIPTION/ORDERING INFORMATION The TPD4S009 and TPD4S010 provide system level electrostatic discharge (ESD) solution for high-speed differential lines. These devices offer four ESD clamp circuits for dual pair differential lines. The TPD4S009 offers an optional VCC supply pin which can be connected to system supply plane. There is a blocking diode at the VCC pin to enable the Ioff feature for the TPD4S009. The TPD4S009 can handle live signal at the D+, D- pins when the VCC pin is connected to zero volt. The VCC pin allows all the internal circuit nodes of the TPD4S009 to be at known potential during start up time. However, connecting the optional VCC pin to board supply plane doesn't affect the system level ESD performance of the TPD4S009. The TPD4S010 does not offer the VCC pin. The TPD4S009 is offered in DBV, DCK, DGS, and DRY packages. The TPDS4010 is offered in DQA package. The TPD4S009DRYR is the most space saving package option available for dual pair high-speed differential lines. The TPD4S009DGSR and TPD4S010DQAR offer flow-through board layout option to reduce signal glitches due to mismatch between the D+ and D- signal pair routing. The monolithic silicon technology allows matching between the differential signal pairs. The excellent matching between the differential pair signal lines (0.05-pF line-line capacitance for the TPD4S009DRY) enables this device to operate at high-speed differential data rates (3-dB bandwidth > 4 GHz). The TPD4S009 and TPD4S010 are suitable for high-speed differential applications, such as high-definition multimedia interface (HDMI), low-voltage differential signaling (LVDS), serial advanced technology attachment (SATA), Ethernet, 1394 (FireWire(R)), etc. TPD4S009/TPD4S010 comply with IEC 61000-4-2 (Level 4) ESD. TPD4S009/TPD4S010 are characterized for operation over the ambient air temperature range of -40C to 85C. 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. FireWire is a registered trademark of Apple Inc. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2008-2009, Texas Instruments Incorporated TPD4S009 TPD4S010 SLVS817C - MAY 2008 - REVISED MAY 2009................................................................................................................................................................. www.ti.com ORDERING INFORMATION PACKAGE (1) (2) TA -40C to 85C (1) (2) (3) NOMINAL DIMENSIONS (mm) ORDERABLE PART NUMBER TOP-SIDE MARKING (3) MSOP - DGS Reel of 3000 W = 4.9, L = 3, H < 1.1, Pitch = 0.5 TPD4S009DGSR 3HR SON - DQA Reel of 3000 W = 1, L = 2.5, H < 1.1, Pitch = 0.5 TPD4S010DQAR 4UR SON - DRY Reel of 5000 W = 1, L = 1.45, H = 0.55, Pitch = 0.5 TPD4S009DRYR 3H SOT (SC-70) - DCK Reel of 3000 W = 2.1, L = 2, H = 0.95, Pitch = 0.65 TPD4S009DCKR 3H_ SOT (SOT-23) - DBV Reel of 3000 W = 2.9, L = 2.8, H < 1.45, Pitch = 0.95 TPD4S009DBVR NFJK Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. DCK: The actual top-side marking has one additional character that designates wafer fab/assembly site. CIRCUIT DIAGRAMS TPD4S009 VCC D2+ D1+ D1- D2- GND TPD4S010 D1+ D2+ D1- D2- GND 2 Submit Documentation Feedback Copyright (c) 2008-2009, Texas Instruments Incorporated Product Folder Link(s): TPD4S009 TPD4S010 TPD4S009 TPD4S010 www.ti.com................................................................................................................................................................. SLVS817C - MAY 2008 - REVISED MAY 2009 TERMINAL FUNCTIONS DBV, DCK, OR DRY PIN NO. DGS PIN NO. DQA PIN NO. NAME I/O 1, 3, 4, 6 1, 2, 4, 5 1, 2, 4, 5 D1+, D1-, D2+, D2- ESD port 2 3 3, 8 GND GND - 6, 7, 9, 10 6, 7, 9, 10 N.C. - 5 8 - VCC Power DESCRIPTION High-speed ESD clamp provides ESD protection to the high-speed differential data lines. Ground Not internally connected Supply Copyright (c) 2008-2009, Texas Instruments Incorporated Product Folder Link(s): TPD4S009 TPD4S010 Submit Documentation Feedback 3 TPD4S009 TPD4S010 SLVS817C - MAY 2008 - REVISED MAY 2009................................................................................................................................................................. www.ti.com ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) MIN MAX -0.3 6 V 0 VCC V Storage temperature range -65 125 C Characterized free-air operating temperature range -40 85 C 260 C IEC 61000-4-2 Contact Discharge 8 kV IEC 61000-4-2 Air-Gap Discharge 9 kV Peak pulse power (tp = 8/20 s) 25 W Peak pulse current (tp = 8/20 s) 2.5 A VCC Supply voltage range for TPD4S009 VIO IO signal voltage range Tstg TA Lead temperature, 1.6 mm (1/16 in) from case for 10 s) UNIT ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP VRWM Reverse standoff voltage Any IO pin to ground VBR Breakdown voltage IIO = 1 mA Any IO pin to ground IIO IO port current VIO = 3.3 V, VCC = 5 V Any IO pin Ioff Current from IO port to supply pins VIO = 3.3 V, VCC = 5 V Any IO pin VD Diode forward voltage IIO = 8 mA Lower clamp diode RDYN Dynamic resistance I=1A Any IO pin 1.1 CIO IO capacitance VCC = 5 V, VIO = 2.5 V Any IO pin 0.8 ICC Operating supply current VIO = Open, VCC = 5 V VCC pin 0.1 4 Submit Documentation Feedback MAX UNIT 5.5 V 0.1 A 0.01 0.1 A 0.8 0.95 9 V 0.01 0.6 V pF 1 A Copyright (c) 2008-2009, Texas Instruments Incorporated Product Folder Link(s): TPD4S009 TPD4S010 TPD4S009 TPD4S010 www.ti.com................................................................................................................................................................. SLVS817C - MAY 2008 - REVISED MAY 2009 TYPICAL CHARACTERISTICS 2 70 D1+ Leakage Current (pA) Insertion Loss (dB) 0 D2+ -2 -4 -6 -8 60 50 40 30 20 10 -10 100k 1.E+05 1M 1.E+06 10M 1.E+07 100M 1.E+08 1G 1.E+09 0 10G 1.E+10 55 25 Temperature, TA (C) -40 Frequency (Hz) Figure 1. Insertion Loss S21 - I/O to GND 85 Figure 2. Leakage Current vs Temperature (VIO = 2.5 V) 220 5.0 200 180 160 140 3.0 Amplitude (V) IO Capacitance (pF) 4.0 2.0 1.0 120 100 80 60 40 20 0 0.0 1 3 2 -20 5 4 0 25 50 IO Voltage (V) 3.0 30 2.5 25 2.0 20 Current (A) 1.5 15 1.0 10 100 125 150 175 200 225 250 Time (nS) Figure 4. IEC Clamping Waveforms (8-kV Contact, Average of Ten Waveforms) PPP (W) IPP (A) Figure 3. IO Capacitance vs Input Voltage (VCC = 5 V) 75 Power (W) 5 0.5 0.0 0 0 5 10 15 20 25 30 35 Time (s) 40 45 50 Figure 5. Pulse Waveform (8/20 s Pulse) Copyright (c) 2008-2009, Texas Instruments Incorporated Product Folder Link(s): TPD4S009 TPD4S010 Submit Documentation Feedback 5 TPD4S009 TPD4S010 SLVS817C - MAY 2008 - REVISED MAY 2009................................................................................................................................................................. www.ti.com TYPICAL CHARACTERISTICS (continued) Figure 6. Eye Diagram Without TPD4S009 6 Submit Documentation Feedback Figure 7. Eye Diagram With TPD4S009 Copyright (c) 2008-2009, Texas Instruments Incorporated Product Folder Link(s): TPD4S009 TPD4S010 PACKAGE OPTION ADDENDUM www.ti.com 26-May-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TPD4S009DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPD4S009DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPD4S009DCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPD4S009DCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPD4S009DGSR ACTIVE MSOP DGS 10 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPD4S009DRYR ACTIVE SON DRY 6 5000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPD4S010DQAR ACTIVE SON DQA 10 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 21-May-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) TPD4S009DBVR SOT-23 DBV 6 3000 180.0 TPD4S009DCKR SC70 DCK 6 3000 TPD4S009DRYR SON DRY 6 5000 TPD4S010DQAR SON DQA 10 3000 9.2 3.23 3.17 1.37 4.0 8.0 Q3 180.0 8.4 2.55 2.34 1.22 4.0 8.0 Q3 179.0 8.4 1.2 1.65 0.7 4.0 8.0 Q1 180.0 8.4 1.3 2.83 0.65 4.0 8.0 Q1 Pack Materials-Page 1 W Pin1 (mm) Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 21-May-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPD4S009DBVR SOT-23 DBV 6 3000 205.0 200.0 33.0 TPD4S009DCKR SC70 DCK 6 3000 202.0 201.0 28.0 TPD4S009DRYR SON DRY 6 5000 220.0 205.0 50.0 TPD4S010DQAR SON DQA 10 3000 202.0 201.0 28.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP(R) Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2009, Texas Instruments Incorporated