Crystal Oscillators - KSS Kinseki CMOS PROGRAMMABLE FREQUENCY DIVIDER KSS-EXO-3 Series Features * * * * * * * * * * * Frequency range 46.875kHz-20MHz Supply voltage range 3 to 6V Starting time <1.5mS Ultrasonic cleaning is available Suitable for various automatic assembly machines Low current consumption (CMOS IC structure) Standby function included High in noise margin Usable with no adjustment Most frequencies held ex-stock SMD version, see Seiko Epson Dimensions (mm) Description The KSS-EXO-3 is a super-small CMOS crystal clock oscillator in an 8-pin dip package equipped with a Programmable Frequency Divider. Division 1/2 to 1/28 simultaneously with the original frequency can be achieved at the user's freedom with this revolutionary device. Composed of an AT-cut oscillator and a specially designed CMOS IC divider, this device realises a wide range of supply voltage, lower power consumption, high speed operation and provides a standby function to meet most of the user's needs. This extraordinary device can utilise various pick & place machinery, replacing traditional oscillators. Pin Connections Standard Frequencies Ex-Stock (MHz) 1.F Outputs the original frequency (fo) of the internal quartz crystal. 2.D Outputs the frequency of programmed dividing ratio (fo/2n). 3.ST Possible to be oscillated when set to HIGH level and stopped in oscillation when set to LOW level. When this function is not needed, be sure to set the STANDBY pin to the HIGH level. EXO-3C/12.00 EXO-3C/12.288 EXO-3C/12.80 EXO-3C/14.31818 EXO-3C/14.7456 EXO-3C/16.00 EXO-3C/16.384 EXO-3C/17.73447 EXO-3C/19.6608 EXO-3C/20.00 EXO-3C/24.00 4. Gnd 5.A, 6.B & 7.C Used to program the dividing ratio for the original frequency. 8.VDD T E L : + 4 4 1 6 3 5 5 2 8 5 2 0 FA X : + 4 4 1 6 3 5 5 2 8 4 4 3 Crystal Oscillators CMO-S PROGRAMMABLE FREQUENCY DIVIDER KSS-EXO-3 Series Absolute Maximum Ratings Parameter Symbol Operating Conditions Specification Parameter Symbol Dividing ratio Power supply (V) Input voltage (V) Output current (mA) Storage Temp. range (C) VDD VI I0 TSTG -0.5 to +7.0V -0.3 to VDD +0.3V 25mA -55 to +125C Supply voltage (V) Operating temp. range VDD TOPR Specification Min. Typ. Max. 3.0V -10C 5.0V 25C 6.0V 70C Characteristics (VDD =5.0V, CL =50pF, Ta = 25C) Parameter Symbol "H" Input voltage (V) "L" Input voltage (V) "H" Output voltage (V) VIH VIL VOH "L" Output voltage (V) VOL Output rise time (Sec.) Output fall time (Sec.) Input leakage current (A) VDD set up time ST set up time (Sec.) Duty ratio (%) Power supply current Standby current TTLH TTLH II TVU TSTU T1/T2 IDD IST Condition Min. Typ. Max. 3.6V 0.8V IOUT =-20A IOUT =4mA IOUT=-20A IOUT =4mA 4.75V 4.5V 10nS 10nS VIN = VDD or Gnd 40/60% 15nS 15nS 1.0A 1.5mS 1.5mS 60/40% 20.0mA 10A Frequency Accuracy * ACT-EXO-3C = 100ppm * ACT-EXO-3D = 500ppm * ACT-EXO-3E = 1000ppm Handling Notes Since this KSS-EXO type crystal clock oscillator employs a CMOS IC integrated with a protection circuit for static electricity, please handle only in an anti static environment. No by-pass capacitor is inserted between the power supply stage (VDD-Gnd). To protect from overvoltage and overcurrent due to power supply noise, provide a capacitor (above 0.01F) as close as possible to the VDD-Gnd pin. If VDD is applied to Pin 4, a Gnd pin, mistaken as Pin 8 (VDD), ot an inverse current is applied to the device, it casuses an internal destruction or no oscillation in some cases. To avoid this, strict care should be taken over correct pin connection. T E L : + 4 4 1 6 3 5 5 2 8 5 2 0 FA X : + 4 4 1 6 3 5 5 2 8 4 4 3 Crystal Oscillators CMOS PROGRAMMABLE FREQUENCY DIVIDER KSS-EX0-3 Series Standard Frequencies 0 0/2n (Divided Waveform) (Original Frequency) 1 0 /2 (MHz) 12.00 12.288 12.80 14.31818 14.7456 16.00 17.734476 18.432 19.6608 20.00 1 /2 (MHz) 6.00 6.144 6.40 7.15909 7.3728 8.00 8.867238 9.216 9.8304 10.00 1 2 /2 (MHz) 3.00 3.072 3.20 3.579545 3.6864 4.00 4.433619 4.608 4.9152 5.00 1 3 /2 (MHz) 1.50 1.536 1.60 1.789772 1.8432 2.00 2.216809 2.304 2.4576 2.50 1 4 /2 (kHz) 750.00 768.00 800.00 894.88 921.60 1000.00 1108.40 1152.00 1228.80 1250.00 1 5 /2 (kHz) 375.00 384.00 400.00 447.44 460.80 500.00 554.20 576.00 614.40 625.00 1 6 /2 (kHz) 187.50 192.00 200.00 223.72 230.40 250.00 227.10 228.00 307.20 312.50 1 7 /2 (kHz) 93.75 96.00 100.00 111.875 115.20 125.00 138.55 144.00 153.60 156.25 1 8 /2 (kHz) 46.875 48.00 50.00 55.9375 57.60 62.50 69.275 72.00 76.80 78.125 Setting of Dividing Output Input C X L L L L H H H H Select B X L L H H L L H H Output ST A X L H L H L H L H L H H H H H H H H F (Original frequency) L f0 clock D (Divided waveform) L Fo/21 Fo/22 Fo/23 Fo/24 Fo/25 Fo/26 Fo/27 Fo/28 T E L : + 4 4 1 6 3 5 5 2 8 5 2 0 FA X : + 4 4 1 6 3 5 5 2 8 4 4 3 Crystal Oscillators CMOS PROGRAMMABLE FREQUENCY DIVIDER KSS-EX0-3 Series Environmental and Mechanical Characteristics Parameter Description Shock 100G, 1/2 sine wave, 0.35mS shock pulse, one each to three directions. Vibration (1) 10 to 55Hz, amplitude 1.5mm one hour each to three directions (2) 50 to 2000Hz, acceleration 20G one hour each to three directions. Solder heat resistance 260C, dip to 1mm from the bottom of mold in soldering tank for 10 secs. Solvent resistance Free from problems of appearance and sealing after dipping into Fronsolve for 90 secs. T E L : + 4 4 1 6 3 5 5 2 8 5 2 0 FA X : + 4 4 1 6 3 5 5 2 8 4 4 3