DM74ALS1008AMX - Fairchild Semiconductor

September 1986

Revised February 2000

DM74ALS1008A Quadruple 2-Input AND Buffer

DM74ALS1008A

Quadruple 2-Input AND Buffer

General Descript ion

These devices contain four independent 2-input buffers,

each of which performs the logic AND function. The

DM74AL S1008A i s a buff er versi o n of the DM 74ALS08.

Features

■Switching specifications at 50 pF

■Switching specifications guaranteed over full tempera-

ture and VCC range

■Advanced oxide-isolated, ion-implanted Schottky TTL

process

■Improved line receiving characteristics

Ordering Code:

Devices also available in Tape and R eel. Speci fy by appending the s uffix let t er “X” to the o rdering c ode.

Connection Diagram Function Table

Y = AB

L = LOW Logic Lev el

H = HIGH Logic Level

Order Number Packag e Num b er Packag e Desc rip ti on

DM74ALS1008AM M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow

DM74ALS1008AN N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Inputs Output

ABY

LLL

LHL

HLL

HHH

www.fairchildsemi.com 2

DM74ALS1008A

Absolute Maximum Ratings(Note 1)

Note 1: The “Absolute Maximum Ratings” are those values beyond which

the saf ety of the device cannot be guarante ed. The device s hould not be

operated at these limits. The parametric values defined in the Electrical

Characteristics tables are no t gua rant eed at the absolute maximum rati n gs.

The “Re comme nded Operat ing Co ndition s” table will define the cond itions

for actu al device operation.

Recommended Operating Conditions

Electrical Characteristics

over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C.

Switching Characteri stics

over recommended operating free air temperature range.

Supply Voltage 7V

Input Voltage 7V

Operating Free Air Temperature Range 0°C to +70°C

Storage Temperature Rang e −65°C to +150°C

Typical θJA

N Package 83.0°C/W

M Package 114.0°C/W

Symbol Parameter Min Nom Max Units

VCC Supply Voltage 4.5 5 5.5 V

VIH HIGH Level Input Voltage 2 V

VIL LOW Level Input Voltage 0.8 V

IOH HIGH Level Output Current −2.6 mA

IOL LOW Level Output Current 24 mA

TAFree Air Operating Temperature 0 70 °C

Symbol Parameter Conditions Min Typ Max Units

VIK Input Clamp Voltage VCC = 4.5V, II = −18 m A −1.5 V

VOH HIGH Level VCC = 4.5V IOH = Max 2.4 3.2 V

Output Voltage VIH = 2V

VCC = 4.5V to 5.5V IOH = −400 µAV

CC − 2V

VOL LOW Level VCC = 4.5V IOL = 12 mA 0.25 0.4 V

Output Voltage VIL = VIL Max IOL = 24 mA 0.35 0.5 V

IIInput Current @ Maximum Input Voltage VCC = 5.5V, VIH = 7V 0.1 mA

IIH HIGH Level Input Current VCC = 5.5V, VIH = 2.7V 20 µA

IIL LOW Level Input Current VCC = 5.5V, VIL = 0.4V −0.1 mA

IOOutput Drive Current VCC = 5.5V, VO = 2.25V −30 −112 mA

ICCH Supply Current with Outputs HIGH VCC = 5.5V, VI = 4.5V 1.8 3 mA

ICCL Supply Current with Outputs LOW VCC = 5.5V, VI = 0V 5.7 9.3 mA

Symbol Parameter Conditions Min Max Units

tPLH Propagation Delay Time VCC = 4.5V to 5.5V 29ns

LOW-to-HIGH Level Output RL = 500Ω

tPHL Propagation Delay Time CL = 50 pF 39ns

HIGH-to-LOW Level Output

3 www.fairchildsemi.com

DM74ALS1008A

Physical Dimensions inches (millimeters) unless otherwise noted

14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow

Package Number M14A

www.fairchildsemi.com 4

DM74ALS1008A Quadruple 2-Input AND Buffer

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Package Number N14A

Fairchild does no t assume any responsibility for use of any circuitry describ ed, no circuit patent licenses are implied a nd

Fairchild reserves the right at any time without notice to change said circuitry and specifications.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life suppor t de vices o r systems a re devices or syste ms

which, (a) are intended for surgical implant into the

body, or (b) support or sustain life, and (c) whose failure

to perform when properly used in accordance with

instructions for use provided in the labeling, can be rea-

sonably expected to result in a significant injury to the

user.

2. A critical compon ent i n any compon ent of a life su pport

device or system whose failure to perform can be rea-

sonabl y ex pect ed to ca use the fa i lure of the life su pp ort

device or system, or to affect its safety or effectiveness.