BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 1
March 2010
BS170 / MMBF170
N-Channel Enhancement Mode Field Effect Transistor
General Description
These N-Channel enhan ce me nt mode field effec t
transist ors are pro duced using Fairchild's proprietary, high
cell density, DMOS technology. These products have been
designed to minimize on-state resistance while provide
rugged, reliable, and fast switching performance. They can
be used in most applications requiring up to 500mA DC.
These products are particularly suited for low volt ag e, low
current applications such as small servo motor control,
power MOSFET gat e drivers, and other switching
applications.
Absolute Maximum Ratings TA = 25°C unless otherwise not ed
Thermal Characteristics TA = 25°C unless otherwise noted
Symbol Parameter BS170 MMBF170 Units
VDSS Drain-Source Voltage 60 V
VDGR Drain-Gate Voltage (RGS 1MΩ)60V
VGSS Gate-Source Voltage ± 20 V
IDDrain Current - Continuous 500 500 mA
- Pulsed 1200 800
TJ, TSTG Operating and Storage Temperature Range - 55 to 150 °C
TLMaximum Lea d Temperature for Solderin g
Purposes, 1/16" from Case for 10 Seconds 300 °C
Symbol Parameter BS170 MMBF170 Units
PDMaximum Power Dissi pation
Derate above 25°C830
6.6 300
2.4 mW
mW/°C
RθJA Thermal Resistance, Junction to Ambient 150 417 °C/W
G
S
D
DGS
TO-92 SOT-23
BS170 MMBF170
Features
High density cell design for low RDS(ON).
Voltage controlled small signal switch.
Rugged and reliable.
High saturation current capability.
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 2
Electrical Characteristics TA=25°C unless otherwise noted
Note:
1. Pulse Test: Pulse Width 300μs, Duty Cycle 2.0%.
Ordering Information
Symbol Parameter Conditions Type Min. Typ. Max. Units
OFF CHARACTERISTICS
BVDSS Drain-Source Breakdown Voltage VGS = 0V, ID = 100μAAll60 V
IDSS Zero Gate Vo ltage Drain Current VDS = 25V, VGS = 0V All 0.5 μA
IGSSF Gate - Body Leakage, Forward VGS = 15V, VDS = 0V All 10 nA
ON CHARACTERISTICS (Notes 1)
VGS(th) Gate Thre sh ol d Voltage VDS = VGS, ID = 1mA All 0.8 2.1 3 V
RDS(ON) Static Drain-Source On-Resistance VGS = 10V, ID = 200mA All 1.2 5 Ω
gFS Forward Transco ndu ctance VDS = 10V, ID = 200mA BS170 320 mS
VDS 2 VDS(on),
ID = 200mA MMBF170 320
Dynamic Characteristics
Ciss Input Capacitance VDS = 10V, VGS = 0V,
f = 1.0MHz All 24 40 pF
Coss Output Capacitance All 17 30 pF
Crss Reverse Transfer Capacitance All 7 10 pF
Switching Characteristics (Notes 1)
ton Turn-On Time VDD = 25V, ID = 200mA,
VGS = 10V, RGEN = 25Ω
BS170 10 ns
VDD = 25V, ID = 500mA,
VGS = 10V, RGEN = 50Ω
MMBF170 10
toff Turn-Off Time VDD = 25V, ID = 200mA,
VGS = 10V, RGEN = 25Ω
BS170 10 ns
VDD = 25V, ID = 500mA,
VGS = 10V, RGEN = 50Ω
MMBF170 10
Part Number Package Package Type Lead Frame Pin array
BS170 TO-92 BULK STRAIGHT D G S
BS170_D26Z TO-92 Tape and Reel FORMING D G S
BS170_D27Z TO-92 Tape and Reel FORMING D G S
BS170_D74Z TO-92 AMMO FORMING D G S
BS170_D75Z TO-92 AMMO FORMING D G S
MMBF170 SOT-23 Tape and Reel
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 3
Typical Electrical Characteristics
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 4
Typical Electrical Characteristics (continued)
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 5
Typical Electrical Characteristics (continued)
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 6
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 7
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 8
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 9
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 10
Mechanical Dimensions ( TO-92 )
TO-92
Dimensions in Millimeters
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 11
SOT23-3L Packaging
Configuration: F igure 1.0
C omponents Leade r T ape
500mm minimum or
125 em pty pock ets
Trailer Ta pe
300mm minimum or
75 em pty pock ets
SOT23-3L Tape Leader and Trailer
Configuration: F igure 2.0
C over T ape
C arrier Tape
Note/Comments
Packaging Option
SOT23-3L Packaging Information
S tandar d
(no flow code) D87Z
Packaging type
Reel Size
TN R
7" D ia
TN R
13"
Qty per Reel/Tube/Bag 3, 000 10, 000
Box Dimension (mm) 193x 183 x80 355x 333x40
Max qty per Box 15, 000 30, 000
Weight per unit (gm) 0. 0082 0. 0082
Weight per Reel (kg) 0. 1175 0. 4006
SOT23-3L Unit Orientation
3P 3P 3P 3P
F63TNR Lab el
Cus tomized Lab el
E mbosse d
Carri er Tape
Antistatic Cover Tape
Packaging Description:
S OT 23-3L par ts ar e s hipped i n tape. T he carrier tape is
made from a d is sipative (carbon filled) polycar bonate
resin. T he cover tape i s a m ultilayer film (Hea t Activated
Adhes ive in nature) primarily c ompos ed o f polyes ter film,
adhes ive l ayer, seal ant, and anti-static s prayed ag ent.
T hes e reeled parts i n s tandard op tion ar e s hipped with
3, 000 units per 7" or 177mm diameter reel. T he r eels ar e
dark blue in color and is ma de of polystyrene plas tic ( anti-
static coated). O ther option c omes in 10,000 units per 13"
or 330c m diameter reel. T his and s ome other options ar e
des cribed in the P ackaging Information table.
T hes e f ull reel s are i ndividually labeled and placed inside
a s tandar d immediate bo x made o f recyclable corrugated
brown paper w ith a F airchild logo p rinting. O ne box
contains f ive r eel s maximum. And thes e immediate boxes
are plac ed ins ide a labeled s hipping box which c omes i n
different sizes depending on the number of parts s hipped.
LO T: CB VK 741B 019
F S ID: MMS Z5221B
D/C1: D9842AB QT Y 1: SPEC REV:
SPEC :
QT Y : 3000
D/C2: Q T Y 2: CP N:
193m m x 183m m x 80m m
P izza B ox for S tandard O ption
B arc ode
Lab el
B arcode L abel
355m m x 333m m x 40m m
Intermediate c ontainer f or 13" re el option
B arcode
Lab el
B arcode L abel s ample
F AIRCHI LD S E MIC ONDUCT O R C ORP OR AT ION (F 63T NR)
SOT-23 Std Tape and Reel Data
©2001 Fairchild Semiconductor Corporation October 2004, Rev. D1
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 12
SOT-23 Std Tape and Reel Data, continued
Dimensions are in millimeter
Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
SOT-23
(8mm)
3.15
+/-0.10
2.77
+/-0.10
8.0
+/-0.3
1.55
+/-0.05
1.125
+/-0.125
1.75
+/-0.10
6.25
min
3.50
+/-0.05
4.0
+/-0.1
4.0
+/-0.1
1.30
+/-0.10
0.228
+/-0.013
5.2
+/-0.3
0.06
+/-0.02
Dimensions are in inches and millimeters
Tape Size Reel
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
8mm 7" Dia 7.00
177.8
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
2.165
55
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 - 0.429
7.9 - 10. 9
8mm 13" Dia 13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
4.00
100
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 - 0.429
7.9 - 10. 9
See detail AA
Dim A
max
13" Diameter Option
7" Diameter Option
Dim A
Max
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim D
min
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
center line
20 deg maximum
Typical
component
center line
B0
A0
Sketch B (Top View)
Component Rotation
Sketch A (Side or Front Sectional View)
Component Rotation
User Direction of Feed
SOT23-3L Embossed Carrier Tape
Configuration: Figure 3.0
SOT23-3L Reel Configuration: Figure 4.0
P1 A0
D1
FW
E1
E2
Tc
Wc
K0
T
B0
D0P0 P2
October 2004, Rev. D1
BS170 / MMBF170 — N-Channel Enhancement Mode Field Effect Transistor
© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
BS170 / MMBF170 Rev. E2 13
Mechanical Dimensions ( SOT-23 )
SOT-23
Dimensions in Millimeters
© Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower¥
Auto-SPM¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED
®
Dual Cool™
EcoSPARK
®
EfficientMax¥
®
Fairchild
®
Fairchild Semiconductor
®
FACT Quiet Series¥
FACT
®
FAST
®
FastvCore¥
FETBench¥
FlashWriter
®
*
FPS¥
F-PFS¥
FRFET
®
Global Power Resource
SM
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
Motion-SPM¥
OptoHiT™
OPTOLOGIC
®
OPTOPLANAR
®
®
PDP SPM™
Power-SPM¥
PowerTrench
®
PowerXS™
Programmable Active Droop¥
QFET
®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
SPM
®
STEALTH¥
SuperFET¥
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS¥
SyncFET¥
Sync-Lock™
®
*
The Power Franchise
®
TinyBoost¥
TinyBuck¥
TinyCalc¥
TinyLogic
®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TriFault Detect¥
TRUECURRENT¥*
PSerDes¥
UHC
®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHI LD SEM ICONDUCTOR RESERVES THE RIG HT TO MAKE CHANGES WITHOUT FURTHER NOTI CE TO ANY PRODUCTS HEREIN TO I MPROVE
RELIABI LITY , FUNCTION, O R DESIGN. FAI RCHILD DO ES NOT ASSUME ANY L IABIL ITY ARI SING OUT OF THE APPL ICATION O R USE OF ANY PRODUCT OR
CIRCUI T DESCRIBED HEREIN; NEI THER DOES IT CONVEY ANY LICENSE UNDER I TS PATENT RIGHTS, NOR THE RIG HTS OF OTHERS. THESE
SPECIFI CATIONS DO NOT EX PAND THE TERMS OF FAIRCHI LD’S WORLDWIDE TERMS AND CONDI TIONS, SPECI FICAL LY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHI LD’S PRODUCTS ARE NOT AUTHORIZED F OR USE AS CRITI CAL COM PONENTS IN LI FE SUPPORT DEVICES OR SY STEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAI RCHI LD SEM ICONDUCTOR CO RPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical im plant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, w ww.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all w arranties and will appropriately address any warranty issues t hat may arise. Fairch ild will not p rovide
any w arranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buy ing direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I47