Description
Named for Paul Neill of Bell Labs and developed in
the 1940’s. The Type N offered the first true
microwave performance.
Type N connector was developed to satisfy the
need for a durable, weatherproof medium size RF
connector with consistent performance through
11 GHz.
There ar e two families of Type N connectors:
• Standard N (Coaxial Cable)
• Helical N (Corrugated Cable)
Primary applications are the termination of medium
to miniature size coaxial cable:
RG-8 and RG-225
RG-58 and RG-141
Features/Benefits
• Accommodates a wide range of medium to
miniature sized RG coaxial cables in a rugged
medium size design. Provides customer flexibility
in their design and manufacturing with a durable
connector.
• Broad line of Military (M39012 pr efix), Industrial
(UG prefix), and Commercial Grade (RFX suffix)
products available. Gives customer choices in
weighing cost versus performance benefits.
• Available in many styles: Plugs (Straight and
Right Angle) and Jacks (Panel Mount, Bulkhead
Mount, Receptacle). Meets many customer
application demands.
Type N Amphenol®
Type N
Specifications 226
Cable Plugs 227
Right Angle Plugs 228
Jacks 229-232
Receptacles, Accessories 234-235
Adapters 236
Helical N Corrugated
Cable Connectors
Specifications 239
Plugs 240-241
Jacks 242-243
225
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Type N
Application
• Antennas
• Base Stations
• Broadcast
• Cable Assemblies
• Components
• Instrumentation
• Mil-Aero
• Radar
• Radios
• Satcom
• Surge Protection
• WLAN
Type N Amphenol®
Specifications
226
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
ELECTRICAL
Impedance 50 ohms
Frequency range 0-11 GHz
Voltage rating 1,500 volts peak
Dielectric 2,500 volts rms.
withstanding voltage
VSWR (MIL-C-39012 M39012 straight
cable connectors) connectors:
1.3 max. 0-11 GHz
M39012 right angle:
1.35 max. 0-11 GHz
Other Contact resistance:
center contact 1.0
milliohm
outer contact 0.2
milliohm
RF leakage: -90 dB
minimum at 3 GHz
Insertion loss: .15 dB
maximum at 10 GHz
Insulation resistance:
5000 megohms
minimum
MECHANICAL
Mating 5/8-24 threaded
coupling
Cable affixment All crimps: hex braid
(braid or jacket) crimp.
Clamps: screw-
thread nut and braid
clamp
Cable affixment Crimp: crimp or solder
(center conductor) All others: solder only
Captivated All crimps. Others,
contact where specified.
Cable retention Crimps: 60-120 lbs.
Clamps: 30-70 lbs.
MILITARY SPECIFICATIONS
MIL-C-39012 & Where applicable
MIL-A-55339
MATERIAL
Contacts Male: brass; Female:
phosphor bronze or
beryllium copper. Silver
or gold plated
Other metal parts Brass:
ASTROplate® finish
except M39012 silver.
Insulators TFE, copolymer of
styrene or glass-TFE
(hermetic seal)
Weatherproof Silicone rubber or
gaskets synthetic rubber
Crimp ferrule Copper
ENVIRONMENTAL
Temperature range TFE -65°C to + 165°C
Copolymer of Styrene:
- 55°C to + 85°C
Weatherproof All series N with gaskets
are weatherproof
Hermetic seals Pass helium leak test of
2 X 10-8 cc/sec
Pressurized Compression seal
Shock MIL-Std. 202 method
213
Vibration MIL-Std. 202 method
204 (test cond. B)
Moisture resistance MIL-Std. 202 method
106
Corrosion MIL-Std. 202 method
101 (test cond. B)
Temperature MIL-Std. 202 method
cycling 102 (test cond. C)
Altitude MIL-Std. 202 method
105 (test cond. C)
.066/.063
.210
.140/.110
.003 MIN
.412/.398
.230/.210
.060/.016
.177 MIN FULL THD.
.168/.158
Å.630 MINÅ.330 MAXÅ.827 MAX
(FILE: NPIN.DWG)
"N" PIN MIN REF PLANE
REF PLANE
SEALING GASKET
.625-24UNEF-2B
.210
.207/.187
.362/.356
.422 MIN
.077/.047
.202/.172 FULL THD.
.077/.047
Å.344/.336 Å.320/.316 Å.627 MAX
REF PLANE
(FILE: NSOC.DWG)
"N" SOCKET
.625-24UNEF-2A MIN
NOTE: These characteristics are typical and may not
apply to all connectors.
PLUG JACK
Type N Type N
Type N Amphenol®
Cable Attachment Method
227
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
b
c•
a ■a
Fig. 1
Fig. 3
Cable RG-/U Cable Attachment Dimensions, inches (millimeters) Construction Notes Military Amphenol Fig.
Outer Inner a b c ●CAI Plt. Ins. Number Number
8, 213 Crimp Crimp 1.48(37.7)■.827(21.0) .418(10.6) C11 P33 D1 Lockwire Holes M39012/01B0007 82-340 1
8, 9, 144, 165, 213 Clamp Solder 1.50(38.1) .827(21.0) .444(11.3) C8 P1 D9 Lockwire Holes UG-21E/U 82-3202 2
Clamp Solder 1.50(38.1) .827(21.0) .444(11.3) C8 P1 D1 Captivated Cont. UG-1185/U 82-312 2
8, 9, 144, 165, 213, Clamp Solder 1.50(38.1) .827(21.0) .444(11.2) C8 P1 D1 Lockwire Holes UG-21D/U 82-202 2
214, 216, 225 Clamp Solder 1.50(38.1) .827(21.0) .437(11.1) C8 P7 D1 — 82-202-RFX 2
9, 214 Crimp Crimp 1.48(37.7)■.827(21.0) .438(11.1) C11 P34 D1 Lockwire Holes M39012/01B0008 82-332 1
9, 214, 225, 393 Crimp Crimp 1.54(39.1)■.827(21.0) .438(11.1) C11 P15 D1 —
—
82-4425-1003 1
55, 142, 223
Crimp Crimp 1.37(34.9)■.827(21.0) .220(5.6) C11 P15 D1 Lockwire Holes
—
82-5370 1
58, 141
Crimp Crimp 1.48(37.7)■.827(21.0) .206(5.2) C11 P17 D1 Lockwire Holes
—
82-5375 1
Crimp Crimp 1.36(34.6)■.827(21.0) .210(5.3) C11 P7 D1 —
—
82-5375-RFX 1
58, 141, 142A, 400 Clamp Solder 1.38(34.9) .827(21.0) .219(5.4) C8 P1 D1 Lockwire Holes UG-536B/U 34025 2
Clamp Solder 1.31(33.2) .827(21.0) .212(6.4) C8 P7 D1 — — 34025-RFX 2
142, 142B, 400 Crimp Crimp 1.38(35.0)■.827(21.0) .220(5.6) C11 P15 D1 —
—
82-4427-1006 1
142, 400 Crimp Crimp 1.45(36.9)■.827(21.0) .220(5.6) C11 P34 D1 Lockwire Holes
M39012/01-0503
82-4427 1
213 Crimp Crimp 1.45(36.9)■.827(21.0) .418(10.6) C11 P34 D1 Lockwire Holes M39012/01-0502 82-4426 1
214, 225, 393 Crimp Crimp 1.45(36.9)■.827(21.0) .438(11.1) C11 P33 D1 Lockwire Holes
M39012/01-0501
82-4425 1
Belden 9913, 9914 Crimp Crimp 1.48(37.7)■.827(21.0) .418(10.6) C11 P15 D1 —
—
82-340-1052 1
B9913, Amph TWB 4001
Clamp Solder 1.50(38.1) .827(21.0) .443(11.2) C8 P1 D1 — — 82-202-1006 2
LMR400, TWB 4001 Crimp Crimp 1.49(37.8)■.850(21.6) .418(10.6) C11 P1 D9 Hex Coupling — 82-6142-1000 3
LMR600, TWB 6001 Crimp Crimp 1.98(50.3)■.930(23.6) .625(15.9) C11 P34 D9 Hex Coupling — 82-5993 3
LMR240, TWB 2401 Crimp Crimp 1.41(35.8)■.850(21.6) .261(6.6) C11 P15 D1 Hex Coupling — 82-6106 3
LMR240, TWB 2401 Crimp Preassy 1.41(35.8)■.850(21.6) .261(6.6) C11 P34 D1 Hex Coupling — 82-6010 3
59, 62 Crimp Crimp 1.36(34.6)■.827(21.0) .261(6.6) C11 P7 D1 — — 82-5380-RFX 1
174, 188, 316 Crimp Crimp 1.41(35.8)■.827(21.0) .125(3.2) C11 P7 D1 — — 82-6034 3
LMR 240, TWB2401 Crimp Crimp 1.17(29.8) .827(21.0) .220(5.6) C11 P7 D1 — — 82-6152 1
402 (.141 S/R) Solder Solder 1.19(30.3) .826(21.0) .141(3.6) C9 P7 D1 — — 82-5955-RFX 4
405 (.086 S/R) Solder Solder 1.19(30.3) .826(21.0) .086(2.2) C9 P7 D1 — — 82-5956-RFX 4
401 (.250 S/R) Solder Solder 1.19(30.3) .826(21.0) .250(6.35) C9 P7 D1 — — 82-6124 4
Ethernet
®
▼
Cables
Times AA4478(FEP),
AA4479(PVC); Belden
Crimp Crimp 1.48(37.7)■.827(21.0) .437(11.1) C11 P7 D1 —
—
82-4426-11RFX 1
89880(FEP), 9880(PVC)
●accommodates cable diameter ■ includes outer ferrule ▼ Ether net = Xerox Trademark ▲ Distributor stocked
N CABLE PLUGS
Crimp-Crimp N Plugs
Crimp-Crimp N Plugs
Fig. 2
Fig. 4
82-202
82-202-RFX
82-3202
82-312
34025
34025-RFX
82-202-1006
82-6034
82-6142-1000
82-5993 82-6106
82-6010
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
82-332
82-340
82-340-1052
82-340-1054
82-4425
82-4425-1003
82-4426
82-4426-11RFX
82-4427
82-4427-1006
82-5370
82-5375
82-5375-RFX
82-5380-RFX
82-6152
Clamp N Plugs
a
82-5955-RFX
82-5956-RFX
82-6124
Solder-Solder N Plugs
b
b
c•
c•
a
bc
Type N Amphenol®
Right Angle Plugs
228
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
b
c•
a d
Fig. 1
Fig. 2 Fig. 3
Crimp N Angle Plugs
82-4440-1001 82-5995
82-5374 82-4440
Clamp N Angle Plug
Cubic Body
18750
82-5988-1000
Crimp N Angle Plug
Cubic Body
82-6048-1000
82-5989-1004
82-6157
82-6165
82-6166
●accommodates cable diameter ■ includes outer ferrule ▲ Distributor stocked
Cable RG-/U Cable Attachment Dimensions, inches (millimeters)
Notes
Military Amphenol Fig.
Outer Inner a b c ●d CAI Plt. Ins. Number Number
9, 214, 225, 393 Crimp Crimp 1.40(35.5) .827(21.0) .437(11.1) 1.95(49.5)■C11 P28 D1 — 82-4440-1001 1
55, 142, 223 Crimp Crimp 1.41(35.7) .827(21.0) .220(5.6) 1.98(50.2)■C11 P11 D1 — 82-5374 1
58, 141, 142 Clamp Solder 1.63(41.3) .827(21.0) .210(5.3) 1.22(31.0) C8 P1 D1 — 18750 2
214, 225, 393 Crimp Crimp 1.40(35.5) .827(21.0) .438(11.1) 1.95(49.5)■C11 P33 D1 M39012/05-0501 82-4440 1
214, 393 Crimp Solder 1.195(30.4) .827(21.0) .438(11.1) 1.62(4.1)■C11 P33 D9 — 82-5988-1000 2
214, 393 Crimp Solder 1.195(30.4) .850(21.6) .438(11.1) 1.62(4.1)■C11 P33 D9 Hex Coupling 82-5988-1004 3
LMR 600, TWB 6001 Crimp Solder 1.32(33.5) .850(21.6) .625(15.9) 1.61(40.9)■C11 P34 D9 Hex Coupling 82-5995 1
Amph TWB 4001, Crimp Solder 1.291(32.8) .850(21.6) .298(7.57) 1.594(40.5)■C11 P33 D9 — 82-6048-1000 3
LMR 400, Belden 9913
LMR 240, 8X Crimp Crimp 1.43(36.5) .827(21.0) .259(6.6) 1.07(27.2) C11 P7 D1 Nickel Body 82-6157 3
LMR 240, 8X Crimp Crimp 1.43(36.5) .827(21.0) .259(6.6) 1.07(27.2) C11 P7 D1 Nickel Body 82-6165 3
LMR 240, 8X Crimp Crimp 1.43(36.5) .827(21.0) .259(6.6) 1.07(27.2) C11 P33 D1 Silver Body 82-6166 3
N RIGHT ANGLE PLUGS
▲
▲
b
a
d■
c•
a
b
d
c
Type N Amphenol®
Straight Jacks
229
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Type N
Fig. 1
Fig. 4
82-4429-RFX
36500-RFX 82-5376-RFX 82-6092-RFX
35025-RFX 82-6158
82-63-RFX
Fig.5
Fig. 7 Fig. 6
82-63
82-209-1006
Fig. 2
Fig. 6
Fig. 9
Fig. 3
●accommodates cable diameter ■ Captivated contact ★ IBM6028495 ▼ max. panel when rear mounted thru panel ▲ Distributor stocked
Cable Conn.
Cable Attachment
Dimensions, inches (millimeters) Notes Military Amphenol Fig
RG-/U Type Outer Inner a b c ●d e CAI Plt. Ins. Number Number
8, 9, 87A,
144,165,213, Str. Clamp Solder 1.56(39.7) .750(19.1) .440(11.2) — — C8 P1 D1 UG-23B/U 82-63 3
214,216,225
B9913,
Times
Str. Clamp Solder 1.56(39.6) .750(19.1) .443(11.3) — — C8 P1 D9 —
82-209-1006
2
AA-6146
59, 62 Str. Crimp Crimp 1.44 (36.7) .866 (22) .210 (5.3) .866 (22) .250 (64) — P7 D1 — 82-5376-RFX 5
59 Str. Crimp Crimp 1.44 (36.7) — — — — — P7 D1 — 82-6092-RFX 6
58, 141 Str. Clamp Solder 1.90 (35.5) .630 (16) .212 (5.4) — — — P7 D1 — 35025-RFX 7
8, 213, 214 Str. Clamp Solder 1.58 (40.2) .750 (19) .437 (11.1) — — — P7 D1 — 82-63-RFX 8
59, 62 Str. Clamp Solder .96 (24.5) .827 (21) .143 (3.6) — — — P7 D1 — 36500-RFX 4
LMR240, 8X
Str. Clamp Solder .96 (24.5) .827 (21) .143 (3.6) — — — P7 D1 — 82-6158 9
213
Str. Crimp Crimp 1.44 (36.6) .669 (17) .440 (11.2) — — — P7 D1 — 82-4429-RFX 1
N STRAIGHT JACKS
▲
▲
▲
b
c•
a
Type N Amphenol®
Panel Mount - 4 Hole Flange
230
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Cable Conn.
Cable Attachment
Dimensions, inches (millimeters) Notes
Mtg
Military Amphenol Fig
RG-/U Type Outer Inner a b c ●d e CAI Plt. Ins. Hole Number Number
55, 141, 142 Panel Crimp Crimp 1.56(39.7)■1.00(25.4) .220(5.6) .576(14.6) .125(3.2)▼C11 P15 D1 T — 82-5372 2
55, 58, 141, Panel Clamp Solder 1.50(38.1) 1.00(25.4) .224(5.7) .656(16.7) .219(5.6)▼C8 P1 D1 T UG-1095A/U 36250 1
8, 9, 87A,
144,165,213, Panel Clamp Solder 1.56(39.7) 1.00(25.4) .440(11.2) — — C8 P1 D1 — UG-23B/U 82-62 3
214,216,225
405 (.085) S/R Panel Solder Solder 1.26(32.2) 1.00(25.4) .086(2.2) .736(18.7) — C9 P7 D1 T — 82-6098-RFX 4
402 (.141) S/R Panel Solder Solder 1.26(32.2) 1.00(25.4) .141(3.6) .736(18.7) — C9 P7 D1 T — 82-6099-RFX 4
401 (.250) S/R Panel Solder Solder 1.26(32.2) 1.00(25.4) .250(6.35) .736(18.7) — C9 P7 D1 T — 82-6163 4
N PANEL JACKS
Fig. 1
82-5372
82-62
36250
82-6098-RFX
82-6099-RFX
82-6163
Fig. 2
Fig. 3 Fig. 4
.718(18.3)
.641(16.3)
.125(3.2)
dia. 4 holes
T
e
max.
panel
thick
c•
a
d
.718(18.3)
.641(16.3)
.125(3.2)
dia. 4 holes
T
c•
a
d
e
max.
panel
thick
bsquare
x .080(2.0) thk.
a
d
b
c
A
231
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
N
ep
y
TN
e
p
y
T
Type N Amphenol®
Bulkhead
35275 82-5373
82-5933 82-5378 82-5994
82-6151 82-6143-100082-6156
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 6 Fig. 7 Fig. 8
Fig. 5
Cable Conn.
Cable Attachment
Dimensions, inches (millimeters) Notes
Mtg
Military Amphenol Fig
RG-/U Type Outer Inner a b c ?d e CAI Plt. Ins. Hole Number Number
55, 58, 141,
Bulkh. Clamp Solder 1.67(42.5) .813(20.6) .224(5.7) .910(23.1) .317(8.1) C8 P1 D1 U UG-556B/U
35275 1
142, 223
55, 142, 223
Bulkh. Crimp Crimp 1.73(43.9)
.872(22.1) .220(5.6) .935(23.7) .250(6.4) C11 P15 D1 U — 82-5373 2
188, 316
Bulkh. Solder Crimp 1.59(40.4)
.866(22.0) .178(4.5) .917(23.3) .315(8.0) C11 P15 D9 U
—
82-5933 3
58, 141
Bulkh. Crimp Crimp 1.74(44.2)
.872(22.1) .206(5.2) .926(23.5) .250(6.4) C11 P34 D1 U
—
82-5378 4
LMR 600
Bulkh. Crimp Crimp 2.21(56.1)
.933(23.7) .625(15.9) .926(23.5) .250(6.4) C11 P34 D9 U
—
82-5994 5
LMR 240, 8X
Bulkh. Crimp Crimp 1.41(36.0)
.866(22.0) .259(6.6) .866(22.0) .255(6.5) C11 P7 D1
— —
82-6151 6
174, 188, 316
Bulkh. Crimp Crimp 1.53(39.0)
.866(22.0) .133(3.4) .866(22.0) .255(6.5) C11 P7 D1
— —
82-6156 7
LMR 400
Bulkh. Crimp Crimp 1.93(49.0)
.750(19.0) .420(10.6) .917(23.2) .324(8.22) C11 P34 D9 U
—
82-6143-1000
8
N BULKHEAD JACKS
.546(13.9)
.641(16.3)
U
b
c•
a
d
.750(19.1)
hex. nut
.531(13.6)
across 2 flats
e max.
panel
.546(13.9)
.641(16.3)
U
c•
dia.
a ?
d
e max.
panel b
.546(13.9)
.641(16.3)
U
c•
dia.
a ?
d
e max.
panel b
.546(13.9)
.641(16.3)
U
c•
dia.
a ?
d
e max.
panel b
.546(13.9)
.641(16.3)
U
c•
dia.
a ?
d
e max.
panel b
aa
a
d
e
c
dd
ee
b
b
cc
Type N Amphenol®
Bulkhead
232
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Cable
Cable Attachment
Dimensions, inches (millimeters) Notes
Mtg
Military Amphenol Fig
RG-/U Outer Inner a b c ●d e CAI Plt. Ins. Hole Number Number
405 (.085) S/R Solder Solder 1.26(32.2)■.866(22.0) .086(2.2) .866(22.0) .255(6.5) C9 P7 D1
——
82-6096-RFX
1
402 (.141) S/R Solder Solder 1.26(32.2)■.866(22.0) .141(3.6) .866(22.0) .255(6.5) C9 P7 D1
——
82-6097-RFX
1
401 (.250) S/R Solder Solder 1.26(32.2)■.866(22.0) .250(6.3) .866(22.0) .255(6.5) C9 P7 D1
——
82-6162
1
8, 213 Crimp Crimp 1.41(36.0)■.866(22.0) .165(4.2) .866(22.0) .255(6.5) C11 P7 D1
——
82-346-RFX
2
174, 188, 316 Crimp Crimp 1.40(35.8)■.866(22.0) .126(3.2) .866(22.0) .255(6.5) C11 P7 D1
——
82-6093-RFX
3
58, 141 Crimp Crimp 1.40(35.8)■.866(22.0) .210(5.3) .866(22.0) .255(6.5) C11 P7 D1
——
82-5378-RFX
4
N BULKHEAD JACKS
Fig. 1
Fig. 4 Fig. 5
82-346-RFX
82-6096-RFX
82-6097-RFX
82-6162
Fig. 2
82-5378-RFX 82-369
82-6093-RFX
Fig. 3
N PANEL, ANGLE PANEL & BULKHEAD RECEPTACLES
Description Terminal Dimensions, inches (millimeters) Plt. Ins. Mtg Military Amphenol Fig.
Type a b d e Hole Number Number
Bulkhead Receptacle (Jack) Solder Cup 1.58(40.1) .813(20.6) .707(18.0) .209(5.3) P34 D11 U M39012/04-0001 82-369 5
Front Mount, Hermetically Sealed
.546(13.9)
.641(16.3)
U
a
d
b
.527(13.4)
across
two flats
emax. panel
.750(19.1)
hex nut
b
b
a
d
e
c
a
d
ee
da
b
da
b
cc
e
c
Type N Amphenol®
Panel Mount Receptacle / Solder Terminal
233
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Type N Type N
Fig. 1 Fig. 2
N Panel Receptacle
Plug Mating Face
49000-RFX
49000-SRFX
N Panel Receptacle
Jack Mating Face
82-97
82-97-RFX
82-368
N Panel Receptacle
Plug Mating Face
82-6100-RFX
Note: Slot width is .9mm (alternate sizes available)
Fig. 4 Fig. 5
Fig. 3
N Panel Receptacle
Jack Mating Face
82-6101-RFX
Note: Slot width is .9mm (alternate sizes available)
.718(18.3)
.641(16.3)
.125(3.2)
dia. 4 holes
T
.718(18.3)
.641(16.3)
.125(3.2)
dia. 4 holes
T
a
d
d
a emax.
panel
b square
x .080(2.0) thk.
b square
x .080(2.0) thk.
N PANEL, ANGLE PANEL & BULKHEAD RECEPTACLES
Description Terminal Dimensions, inches (millimeters) Plt. Ins. Mtg Military Amphenol Fig.
Type a b d e Hole Number Number
Panel Receptacle (Jack) Solder Cup 1.11(28.2) 1.00(25.4) .656(16.7) .187(4.7)▼P1 D1 T UG-58A/U 82-97 2
4-hole Square Flange, Solder Cup 1.13(28.7) 1.00(25.4) .656(16.7) .187(4.7)▼P7 D1 T — 82-97-RFX 2
Front or Rear Mount Solder Cup 1.11(28.2) 1.00(25.4) .656(16.7) .187(4.7)▼P34 D1 T M39012/04-0002 82-368 2
Panel Receptacle (Plug) Solder Cup 1.09(27.8) 1.00(25.4) .745(18.9) — P7 D6 T —49000-RFX 1
4-hole Square Flange, Front Mount Only
Panel Receptacle (Plug) Solder Cup 1.09(27.8) 1.00(25.4) .745(18.9) — P33 D6 T —49000-SRFX 1
4-hole Square Flange, Front Mount Only
Panel Receptacle (Plug) Slotted Post .874(22.2) .826(21.0) .791(20.1) — P7 D1 ——
82-6100-RFX 3
4-hole Square Flange, Front Mount Only
Panel Receptacle (Jack) Slotted Post .818(20.8) — .736(18.7) — P7 D1 ——
82-6101-RFX 4
4-hole Square Flange, Slot Terminal
Panel Receptacle (Jack) Exposed TFE 116(29.7) — .736(18.7) — P7 D1 ——
82-6095-RFX 5
4-hole Square Flange, Exposed TFE
▲
▲
d
a
d
a
d
a
b
N Panel Receptacle
Jack Mating Face
Exposed TFE
82-6095-RFX
Type N Amphenol®
Adapters, Straight
234
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Fig. 1 Fig. 2
Plug to Plug Adapter
82-100-RFX
Adapter Ends Description Dimensions, inches (millimeters) Mtg Construction Notes Military Amphenol Fig.
a b d e Hole Plt. Ins. Other Number Number
Plug-Plug Straight 1.59(40.5) .813(20.6) — — — P4 D1 — UG-57B/U 82-100 1
Plug-Plug Straight 1.59(40.5) .813(20.6) — — — P7 D1 — UG-57B/U 82-100-RFX 2
Jack-Jack Straight 1.78(45.2) .656(16.7) — — — P1 D1 — UG-29B/U 82-101 3
Jack-Jack Straight 1.50(38.1) .620(15.8) — — — P1 D1 — UG-29B/U 82-101-RFX 4
N ADAPTERS
▲ Distributor stocked
Plug to Plug Adapter
82-100
Fig. 3
N Straight Adapter, Jack-Jack
82-101
a
b
Jack to Jack Adapter
82-101-RFX
Fig. 4
a
b
Type N
Type N Amphenol®
Adapters, Bulkhead/Angle & Tee
235
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Fig. 3
N Angle Adapters, Plug-Jack
82-64
N Angle Adapter, Plug-Jack
82-213
82-64-RFX
N Tee Adapter
Jack-Plug-Jack
82-102
N Tee Adapter
Jack-Jack-Jack
82-99
Fig. 4
Fig. 5 Fig. 6
Adapter Ends Description Dimensions, inches (millimeters) Mtg Construction Notes Military Amphenol Fig.
a b d e Hole Plt. Ins. Other Number Number
Jack-Jack Bulkhead 1.63(41.3) .813(20.6) .708(18.0) .312(7.9) U P1 D6 Pressurized UG-30/U 82-66 1
Jack-Jack Bulkhead 1.50(38.1) .866(22.0) .866(22.0) .256(6.5) U P1 D6 Pressurized UG-30/U 82-66-RFX 2
Jack-Plug Angle 1.44(36.5) .813(20.6) 1.37(34.9) — — P1 D1 Mitre Body UG-27A/U 82-64 3
Jack-Plug Angle 1.44(36.5) .813(20.6) 1.28(32.5) — — P7 D1 Cubic Body — 82-64-RFX 4
Plug-Jack Angle 1.31(33.3) .813(20.6) 1.40(35.7) — — P1 D1 Cubic Body UG-27C/U 82-213 4
Jack-Plug-Jack Tee 1.75(44.5) .813(20.6) 1.48(37.6) — — P5 D1 — UG-107B/U 82-102
5
Jack-Jack-Jack Tee 1.75(44.5) .656(16.7) 1.22(31.0) — — P5 D1 — UG-28A/U 82-99
6
N ADAPTERS
▲
▲
▲
▲
▲ Distributor stocked
a
b
d a d
b
a a
b dd
b
Fig. 1 Fig. 2
Jack to Jack
Bulkhead Adapter
82-66-RFX
Jack to Jack
Bulkhead Adapter
82-66
a
d
.546(13.9)
.641(16.3)
U
emax.
panel
b
e
d
a
b
Type N Amphenol®
Caps
236
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Fig. 1 Fig. 2
N Terminator Jack
82-5721-10RFX N Male Cap /
Resistor Terminated
82-5722-RFX N Female Cap /
Resistor Terminated
82-5721-1000
▼ max. panel when rear mounted thru panel ▲ Distributor stocked
Fig. 3
Description Dimensions, inches (millimeters) Military Amphenol Fig.
ab
Plt. Ins. Number Number
Male Cap Resistor Terminated, 50Ω5%, 1 Watt 1.30(33.0) .827(21.0) P7 D1 — 82-5722-RFX 2
Female Cap Terminator, 49.9Ω1%, 1 Watt 1.30(33.0) .656(15.7) P17 D1 — 82-5721-1000 3
Female Cap Terminator, 50.0Ω5%, 1 Watt 1.30(33.0) .656(15.7) P17 D1 — 82-5721-10RFX 1
N CAPS
b
b
a a
a
b
Description
Intermodulation Distortion (IMD) is of increasing
concern to many W ireless Infrastructure OEMs
due to the need for higher power applications and
increased r eceiver sensitivity performance. Having
the ability to measure IMD in-house gives Amphenol
the unique ability to understand the affects of our
connector designs on IMD generation and enabling
Amphenol to design the highest performance
IMD connectors in the industry.
Our new series of Low Intermodulation N
connectors is a result of our ef forts in connector
design optimization.
Features/Benefits
• Typical IMD -125 dBm
• All components silver plated
• 360˚ outer contacts
• Gold plated inner contacts
• EZ HEZTM coupling nut for ease of installation
• A vailable for 1/4", 3/8" and 1/2" superflexible
corrugated cables, and 1/2", 7/8", 1 1/4", 1 5/8",
standard flexible corrugated cables
• Consult your Amphenol sales representative for
details
Applications
• Cellular
• PCS
• Microwave Radio
• Paging
Type N Amphenol®
Corrugated Cable Connectors
Annular Type N
Specifications 239
Plugs and Jacks 240-243
237
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Type N
Type N Amphenol®
Corrugated Cable Connectors
238
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
RF coaxial connectors are the most
important element in your cable
system. Corrugated copper coaxial
cables have the potential to deliver
all the performance your system
requires, but they are often limited
by the performance of the connectors.
TXL coaxial connectors have been
designed from the ground up to
deliver optimum performance, while
retaining ease of installation.
Intermodulation distortion, a major
concern in today’s communications
systems, is consistently low with
TXL connectors. Typical performance
is -125 dBm (-168 dBc). In-house
IMD measurement capability gives
Amphenol the unique ability to
understand the effects of connector
design elements on IMD generation
and to design the best performing
connectors in the industry.
Self-flaring designs are easily attached
with standard hand tools in the field,
and are highly r esistant to pull off and
twist off.
All TXL coaxial connectors are
optimally matched to their cables
for low VSWR and insertion loss.
All TXL connectors feature a simple two-piece
design for easier attachment, and all connectors
for a given size share a common back nut and
trimming dimensions.
O-rings are pre-assembled to the back nuts,
eliminating installation problems and lost parts.
Captive center pins simplify installation and
eliminate perfor mance variations due to
soldering errors and incorrect pin depths.
Continuous 360oouter conductor contact is
proven to minimize IMD generation
compared to spring finger contacts.
Many TXL connectors feature one-piece bodies.
The outer conductor contact and connector body
are a single piece to minimize IMD generation.
Unique coupling nut design allows tightening by
hand or with a standard wrench.
Center contacts are gold or silver plated. Bodies
are white bronze plated for excellent IMD perfor-
mance, and are corrosion resistant for a long,
trouble-free life.
Plated Surfaces
Pre-assembled O-Rings
Captive Center Pins
360oContact
One-Piece Body
Easy-Hex Coupling Nut
Two-Piece Design
Type N Type N
Type N - Corrugated Amphenol®
Specifications
239
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
ELECTRICAL
Impedance 50 ohms
Frequency range 11.0 GHz
Return Loss 33 dB (1-2 GHz)
(Freq. GHz) 28 dB (2-3 GHz)
Operating voltage max. 707 vrms
Dielectric 2,000 vdc
withstanding voltage
Other Peak power: max 10kW
Avg. power: max .60kW
Insulation resistance:
min 5,000 MOhms
Insertion loss: .05 freq
GHz
Shielding effectiveness:
min. 125 dB
3rd order IM product,
typical -125 dBm
(-168 dBc)
MECHANICAL
Mating MIL-Std. 348
Inner attachment Solder or captivated
method
Outer attachment Compression
method
Assembly torque 18/22 lb-ft
(25/30 N-m)
Coupling torque 15.00 lb-in (1.70 N-m)
Coupling nut 100.00 lbs (444.80 N)
retention force
Connector durability 500 cycles, 12
cycles/min
MATERIAL
Body Brass, silver plated
Contacts Outer: Brass, silver
plated
Inner: BeCu, gold
plated
Other metal parts Brass; silver plated
Insulators TFE
Gaskets Silicone rubber
ENVIRONMENTAL
Temperature range Operating:
-40°C to +150°C
Storage:
-70°C to +100°C
Thermal Shock MIL-Std. 202 method
107 (test cond. A-1)
Immersion IEC 529, IP68
Vibration MIL-Std. 202 method
204 (test cond. B)
Corrosion MIL-Std. 202 method
101 (test cond. B)
Mechanical MIL-Std. 202 method
Shock 213 (test cond. I)
* These characteristics are typical and may not apply
to all connectors.
S
Corrugated
Cable
S=Superflex (helical)
A=Annular
1
Cable
Diameter
1=1/4”
2=3/8”
4=1/2”
5=7/8”
6=1-1/4”
7=1-5/8”
W
Plating
W=While Bronze
P=Plated Body
(none)=Unplated
N
Interface
N=Type N
M
Gender
M=Male (plug)
F=Female (jack)
R=Right Angle
Male (plug)
PM
Options
PM=Panel Mount
PM-SO=Panel Mount-
Slotted Outer
U=Universal
Type N - Corrugated Amphenol®
Plugs
240
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Inner Amphenol
Cable Attachment a b Body Contact Number
1/4" Helical Solderless 1.97 .74 White Bronze Gold S1WNM
1/4" Helical Solder 1.97 .74 Silver Gold S1PNM-S
3/8" Helical Solderless 2.437 .875 White Bronze Gold S2WNM
3/8" Helical Solder 2.437 .875 Silver Gold S2PNM-S
3/8" Helical Solderless 2.437 .875 Silver Gold S2WNM-SO
1/2" Helical Solderless 2.46 .950 White Bronze Gold S4WNM-U
1/2" Helical Solder 2.46 .950 White Bronze Gold S4WNM-SU
1/2" Helical Solder 2.46 .950 Unplated Silver S4NM-S
1/2" Annular Solderless 2.81 1.025 Silver Gold A4PNM
1/2" Annular Solder 2.81 1.03 Silver Gold A4PNM-S
1/2" Annular Solder 2.81 1.03 Unplated Silver A4NM-S
1/2" Annular Solderless 2.81 1.025 Unplated Silver A4NM
7/8" Annular Solderless 2.99 1.62 Silver Silver A5PNM
7/8" Annular Solderless 2.99 1.62 Unplated Silver A5NM
N PLUG INTERFACE — STRAIGHT
Refer to chart below
a
b
Type N Type N
Type N - Corrugated Amphenol®
Plugs
241
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Inner Amphenol
Cable Attachment a b c Body Contact Number
1/4" Helical Solderless 1.45 1.94 .76 White Bronze Gold S1PNR
3/8" Helical Solderless 1.679 2.30 .875 White Bronze Gold S2PNR-SO
1/2" Helical Solder 1.74 1.91 .94 White Bronze Gold S4PNR-S
1/2" Helical Solderless 1.74 2.26 .94 White Bronze Gold S4PNR
1/2" Annular Solderless 1.80 2.53 1.00 White Bronze Gold A4PNR
N PLUG INTERFACE — RIGHT ANGLE
b
a
Refer to Chart Below
c
Type N - Corrugated Amphenol®
Jacks
242
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Inner Amphenol
Cable Attachment a b Body Contact Number
1/4" Helical Solderless 1.87 .74 White Bronze Gold S1WNF
1/2" Helical Solderless 2.36 .95 White Bronze Gold S4WNF-U
1/2" Helical Solder 2.36 .95 Silver Gold S4PNF-S
1/2" Helical Solder 2.36 .95 Unplated Silver S4NF-S
1/2" Annular Solderless 2.56 1.03 White Bronze Gold A4WNF
1/2" Annular Solder 2.56 1.03 Silver Gold A4PNF-S
1/2" Annular Solder 2.56 1.03 Unplated Silver A4NF-S
1/2" Annular Solderless 2.56 1.03 Unplated Silver A4NF
7/8" Annular Solderless 2.64 1.62 Unplated Silver A5NF
7/8" Annular Solderless 2.64 1.62 White Bronze Gold A5WNF
1 1/4" Annular Solderless 3.81 1.87 White Bronze Gold A6WNF
1 1/4" Annular Solderless 3.81 1.87 Silver Gold A6PNF-H
1 1/4" Annular Solderless 3.81 1.87 Unplated Silver A6NF
1 1/4" Annular Solderless 3.81 1.87 Unplated Silver A6NF-H
1 5/8" Annular Solderless 4.26 2.36 White Bronze Gold A7WNF
1 5/8" Annular Solderless 4.26 2.36 Unplated Silver A7NF-1
N JACK INTERFACE — STRAIGHT
Refer to Chart Below
a
b
Type N Type N
Helical N - Corrugated Amphenol®
Jack Bulkhead Mount
243
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Inner Amphenol
Cable Attachment a b c Body Contact Number
3/8" Helical Solderless 2.42 .88 .94 Silver Gold S2PNF-BH
N JACK BULKHEAD MOUNT
S2PNF-BH
a
c
b
