3 ROW Crimped Wire /O Plug 075" RA3 11 thru 80 Contacts RA3D20593EA5900 .275 -150 | 400 - 1375 500 #2-56 JACKSOCKET P~) 300 f= 080 POSITION #1 -209 ~| , 125 .025+.001 (2 PLCS) DIA TYP +--H _ (Ta _ Lu Cc | | - an | | ea ; | | | | = .075 TYP 1 _ | 7 .0375 TYP LL 62s #256 JACKSCREW .075 TYP PLUG WITHOUT PLUG WITH MOUNTING EARS OR MOUNTING EARS AND POTTING WELL POTTING WELL DIMENSIONS RA3 PLUG CONNECTORS MATE WITH: SIZE A B c D E MATE DESCRIPTION PAGE 11 665 475 225 -150 1.005 RM322 | 3 ROW STRAIGHT RECEPTACLE WITH EARS R-21 235 -965 -775 525 450 1.305 RM342 | 3 ROW STRAIGHT RECEPTACLE WITHOUT EARS R-21 35 1.265 1.075 825 .750 1.605 RM362 | 3 ROW RIGHT ANGLE RECEPTACLE WITH EARS R-23 47 1.565 1.375 1.125 1.050 1.905 RM382 | 3 ROW RIGHT ANGLE RECEPTACLE WITHOUT EARS] R-23 59 1.865 1.675 1.425 1.350 2.205 71 2.165 1.975 1.725 1.650 2.505 REPLACEMENT CONTACTS: 80 2.390 2.200 1,950 1.875 2.730 RAOQOO0011000000 RAOQOO001 300-0000 SEE PAGE R-33.4 FOR CRIMP INSTRUCTIONS, CONTACT INSERTION AND CONTACT REMOVAL TOOLS. Call (972) 931-3200 - Fax (972) 931-9305 - www.AirBorn.com "R Series Connectors REV B R-33 CTR139PLUG: RA3D20593EA5900 | SERIES RA .075" Screw Machine PC Connector XXXXXXXXXXX XXXX | BODY 3-Row a BODY STYLE: Plug, straight, w/ potting well, w/ mounting ears Plug, straight, w/ potting well, w/out mounting ears Plug, straight, w/out potting well, w/ mounting ears Plug, straight, w/out potting well, w/out mounting ears vu0ou> BODY MATERIAL: Polyphenylene sulfide (PPS) ND | SIZE 011, 023, 035, 047, 059, 071, 080 | CONTACTS TYPE CONTACTS/TERMINATIONS: Pin, crimp, 28-30 awg. contact 3 Pin, crimp, 22-26 awg. contact = WIRING OPTIONS: XX See wiring codes at right HARDWARE STYLE OF HARDWARE: 0256 None Guide Hardware 5500 Guide set 5501-5568 Guide set, polarized (see page R-38) 5570 (to be keyed by customer) 5700 Two guide pins 5800 Two guide sockets Jacking Hardware 2900 Fixed jackset 3000 Fixed jackset, reversed 1900 Two fixed jackscrews 2000 Two fixed jacksockets 5900 Hex turning jackset, .200" knob 6000 Hex turning jackset, reversed, .200" knob 6100 Two hex turning jackscrews, .200" knob 6200 Two hex turning jacksockets, .200" knob 6400 Turning jackset, .490" knob 6500 Turning jackset, reversed, .490" knob 6600 Two turning jackscrews, .490" knob 6700 Two turning jacksockets, .490" knob Guide set, polarized, same as 5501 without Loctite J] = Option not RoHS compliant If potting well is used with a pre-wired connector, it will be potted and not repairable. If potting well is not used with a pre-wired connector, it will not be potted. Contacts that are not potted in place can be removed and replaced only one time. See page R-33.4 for crimp instructions, contact insertion and contact removal tools. WIRE CODES: TYPE and COLOR LENGTH Code Size Color Code Length Mil-W-16878/4 (+1-0") A 22 awg Ten repeating A 6" B 22 awg White B 42" C 24awg Ten repeating Cc 18" D 24awg White D 24" E 26 awg Ten repeating E 30" F 26 awg White F 36" G 28awg Tenrepeating G 42" H 28 awg White H 48" J 30 awg Ten repeating J 54" K 30 awg White K 60" L 66" Mil-W-22759/33 M 72" L 22 awg Ten repeating N oe M 22 awg White R 4108" N 24 awg Ten repeating S 120" P 24 awg White R 26 awg Ten repeating S 26 awg White T 28 awg Ten repeating U 28 awg White Vv 30 awg Ten repeating W 30awg White USING WIRE CODES: RA3D20593EA5900 Type and Color Length Color sequence for Ten repeating wire colors: (Beginning in position #1) Black Brown Red Orange Yellow Green Blue Violet Grey White Repeat this sequence until connector is fully loaded. REV C CTR140 Ask About AirBorn's Accelerated Delivery Service "R Series Connectors R-33.1RA Assembly Instructions CDG17258 includes: INSERTION TOOL/ Arbor press REMOVAL TOOL Insertion tip Removal tip Fixture FIXTURE USE REMOVAL FIXTURE TO REMOVE CONTACT USE INSERTION FIXTURE TO INSERT CONTACT CONNECTOR CONTACT INSERTION INSTRUCTIONS: {. Load connector with crimped contacts. 2. Place preloaded connector on insertion fixture with wire side facing up. 3. Position fixture so insertion tool is over contact. 4. Place wire against insertion tool cutout trench. 5. Crank handle on press to seat contact. SIDE FRONT SIDE FRONT VIEW VIEW VIEW VIEW INSERTION TOOL: REMOVAL TOOL: AIRBORN P/N: CDG17256 AIRBORN P/N: CDG17257 CONTACT REMOVAL INSTRUCTIONS: 1. Place connector on removal fixture with mating side facing up. 2. Position fixture so removal tool is over contact. 3. Crank handle on press to remove contact. INSERT DIRECTION FIGURE 1 PRELOADED CONTACT SEATED CONTACT REMOVAL DIRECTION MATING FACE FIGURE 2 S SEATED EXTRACTED CONTACT CONTACT Call (972) 931-3200 Fax (972) 931-9305 www.AirBorn.com "R Series Connectors R-33.4 REV B CTR153