TB-7000 Page 1 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
Reztore® Surface & Mat Cleaner
Application Instructions
Description
Reztore® Surface & Mat Cleaner is a liquid cleaner used
to remove dust, grease, grime, fingerprints, and solder
flux from all surfaces used in a static sensitive area.
Reztore® Surface & Mat Cleaner leaves no insulative
residue, contains no alkali or ammonia, and according
to NFPA and OSHA, is "non-flammable".
General Guidelines
Reztore® Surface & Mat Cleaner is a liquid cleaner
which can be used on a variety of surfaces, especially
surfaces used in a static sensitive environment.
Surfaces include but are not limited to: rubber, vinyl
and polyethylene table and floor mats, field service
kits, laminated table tops, tote boxes, epoxy, painted
surfaces, plexiglass, glass, metal, 3-ring binders,
computer screens, computer keyboards, shelving, push
carts, conveyor belts, etc.
NOTE: Cleaners with silicone leave an insulative
residue on surfaces and solvents such as
2-Butoxyethanol or Ethanolamine used in cleaners can
dry out the material; both can prevent conductive or
dissipative mats from functioning properly.
“Periodic cleaning, following the manufacturer’s
recommendations, is required to maintain proper
electrical function on all work surfaces. Ensure that
cleaners that are used do not leave an electrically
insulative residue common with some household
cleaners that contain silicone.” (ESD Handbook ESD
TR20.20 section 5.3.1.14 Worksurface Maintenance)
“Only cleaning materials or processes which do not
degrade the properties of the ESD protective items,
shall be used.” (EN 61340-5-1 clause 5.5 EPA working
practices)
June 2018
Directions
Smooth Surfaces:
Apply Reztore® Surface & Mat Cleaner to the entire
surface to be treated using either the pump or trigger
spray bottle. Use a lint-free cloth to wipe the surface
until dry. For set stains, let Reztore® Surface & Mat
Cleaner soak on the surface for 30 seconds before
wiping clean.
DESCO INDUSTRIES INC TECHNICAL BULLETIN TB-7000
Made in the
United States of America
Figure 2. Applying Reztore® to the mat
Figure 1.
Reztore
®
Surface & Mat Cleaner:
16 Ounces (500 mL) Spray Bottle
1 Quart (1 liter) Spray Bottle
2.5 Gallons (10 liters) Bag-in-Box
Other Surfaces - Keyboards:
Dampen a lint-free cloth or a lint-free swab with
Reztore® Surface & Mat Cleaner. Wipe surface to be
cleaned using either the cloth or swab. The swab will
work best for tight spots like between keyboard keys.
Use the cloth to wipe clean the remaining surfaces of
the keyboard.
Figure 3. Cleaning a keyboard or computer screen with
Reztore
®
Surface & Mat Cleaner
On non-ESD surfaces, we recommend using Reztore®
Topical Antistat static dissipative coating. While coating
is on the surface it will enhance existing ESD surfaces
and will give dissipative electrical properties to insulative
surfaces.
TB-7000 Page 2 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
Specifications
Appearance of
Solution
Transparent violet
pH 6.0 - 8.0
Odor Slight floral
Solubility Water, acetone, alcohols
Toxicity, Irritation,
Sensitivity
Non-toxic by dermal contact,
or inhalation
Flammability "Non-flammable" per NFPA
and OSHA.
Flammable Cat. 3 per CLP
Ion Level (mg/L) Fluoride
Sulfate
Nitrate
Bromide
Phosphate
0.3
<0.5
1.2
<0.5
<0.5
Electrical Properties
(Dry Film)
1 x 107 to < 1 x 109 ohms
(ref. ANSI/ESD S4.1)
Static Decay Rate <0.01 seconds
(per FTMS 101C
Method 4046)
Testing
It is recommended to test the surface after cleaning to
ensure that all insulative contaminants such as dirt and
grime have been removed. Reztore® Surface & Mat
Cleaner will only leave behind a coating with a surface
resistance of less than 1 x 109 ohms.
Storage
Reztore® Surface & Mat Cleaner product does not have
a set life span. The chemicals are not known to degrade
over time when stored at the proper temperature
conditions as stated in the Safety Data Sheet. We also
recommend that this product be stored in its original
container and be sealed when not in use.
Reztore® Surface and Mat Cleaner
is available from
these Desco Industries brands:
for service and support in North America
16 Oz. 10439
1 Quart 10435
2.5 Gallons 10438
for service and support in Asia
0.5 Liter 10439
1 Liter 10435
10 Liters 10438
RoHS , REACH, and Conflict Minerals Statement
See the Desco Industries RoHS , REACH, and
Conflict Minerals Statement:
DescoIndustries.com/ROHS.aspx
Desco Industries Limited Warranty
See the Desco Industries Limited Warranty:
DescoIndustries.com/Warranty.aspx
for service and support in United Kingdom and
Europe
1 Litre 229021
1 Litre 12 Packs 229022
10 Litres 229023
TB-7000 Page 3 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
SAFETY DATA SHEET
May be used to comply with OSHA Hazcom 29 CFR 1910.1200, Reg. (EU) No.453/2010 and Japan JIS
7253-2012). Standards must be consulted for specific requirements.
Revision Date: 2018-06-26
SECTION 1 — IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1 Product identifiers
Product Name: Reztore® Surface and Mat Cleaner
EC No.: None
REACH Registration No.: None
CAS No.: None
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified use: Cleaner, ESD Surface & Mat
1.3 Details of the supplier of the safety data sheet
Supplier: DESCO INDUSTRIES INC
United States
One Colgate Way
Canton, MA 02021
+1 781-821-8370
United Kingdom
2A Dunhams Lane
Letchworth Garden City
Hertfordshire, SG6 1BE
+44 (0) 1462 672005
Japan
661-1 Yachimata-ho
Yachimata-Shi
Chiba-Ken 289-1115
+81 43-309-4470
Email Address: Service@DescoIndustries.com
1.4 Emergency telephone number
United States:
United Kingdom:
Japan:
+1 781-821-8370
+44 (0) 1462 672005
+81 43-309-4470
Office hours: 8:00 AM - 5:00 PM
SECTION 2 — HAZARDS IDENTIFICATION
2.1 Classification of substance or mixture
Classification according to OSHA Hazcom 29 CFR 1910.1200, Regulation (EC) No 1272/2008, JIS 7252-2014
Flammable liquid Category 3
Eye irritation Category 2
Specific target organ toxicity
(Single exposure)
Category 3
2.2 Label elements
Labelling according to OSHA Hazcom 29 CFR 1910.1200, Regulation (EC) No 1272/2008, JIS 7252-2014
Hazard pictograms/Symbols:
Signal word: Warning
Hazardous statements: H226 Flammable liquid and vapor
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness
Precautionary statements: Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
P241 Use explosion-proof electrical/vetilating/lighting equipment.
TB-7000 Page 4 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
Response
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately
all contaminated clothing. Rinse skin with water/shower.
P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep
comfortable for breathing. Call a POISON CENTER/doctor if you feel
unwell.
P305 + P351 + P338 + P337 + P313 IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
2.3 Other hazards N/A
SECTION 3 — COMPOSITION/INFORMATION ON INGREDIENTS
3.2 Mixture
Components CAS No. %wt. Classication
Isopropanol 67-63-0 5 - 25 % OSHA 29CFR 1910.1200:
Flammable liquids - Category 2
Eye Irritation - Category 2A
STOT - Category 3
Reg. (EC) No. 1272/2008:
Flammable liquids - Category 2
Eye Irritation - Category 2
STOT - Category 3
JIS 7252-2014
Flammable liquids - Category 2
Eye Irritation - Category 2
Reproductive toxicity - Category 2
STOT SE - Category 1,3
STOT RE - Category 1,2
SECTION 4 — FIRST AID MEASURES
4.1 Description of first aid measures
Eye Contact Flush with water for at least 15 minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Skin Contact Wash with soap and water. If skin irritation occurs: Get medical advice/
attention.
Ingestion Drink several glasses of water. DO NOT induce vomiting. Contact a
physician.
Inhalation Move subject to fresh air.
4.2 Most important symptoms and effects, both acute and delayed
None known
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically
SECTION 5 — FIRE FIGHTING MEASURES
5.1 Extinguishing media
Suitable Extinguishing Media Use an extinguishing agent suitable for the surrounding fire
Unsuitable Extinguishing Methods N/A
5.2 Special hazards arising from the substance or mixture
Hazards from the substance or mixture: Unknown
Hazardous thermal decomposition products: Unknown
TB-7000 Page 5 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
5.3 Advice for firefighter
Special protective actions for fire-fighters: Cool endangered receptacles with water spray. Remove containers
from path of fire when safe to do so. Do not approach containers suspected to be hot.
Special protective equipment for fire fighters: Wear self-contained breathing apparatus and protective suit.
SECTION 6 — ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Wearing protective clothing. Inhalation protection. Extinguish all ignition sources.
6.2 Environmental precautions
Biodegradable
6.3 Methods and materials for containment and cleaning up
Contain and collect material into plastic container. Water rinse and drain, flush small amounts. Use sanitary landfill
disposal. Follow national and local regulations (RCRA; Subtitle D).
If Material is Released/Spilled: Keep spectators away. Contain spill with inert material (e.g. sand, earth). Keep spills
and cleaning runoffs out of municipal sewers and open bodies of water.
6.4 Reference to other sections
See SECTION 1, Emergency contact information.
See SECTION 8, Information on appropriate personal protective equipment.
See SECTION 13, Disposal Considerations, for information regarding the disposal of contained spills.
SECTION 7 — HANDLING AND STORAGE
7.1 Precautions for safe handling
Use in well-ventilated areas; avoid breathing vapors. Keep containers closed when not in use. Avoid from freezing.
7.2 Conditions for safe storage, including any incompatibilities
Store in a cool, dry place with adequate ventilation. Keep from freezing - product may coagulate.
Storage temperature: Max. 49°C/120°F 1°C/34°F
7.3 Specific end uses N/A
SECTION 8 — EXPOSURE CONTROL / PERSONAL PROTECTION
8.1 Control parameters
If exposure limits exist, they are listed below. If no exposure limits are displayed, then no values are applicable.
Component Regulation Type of listing Value/Notation
Isopropanol
CAS No.: 67-63-0
EU ACGIH
EU ACGIH
US OSHA Z-1
TWA
STEL
TWA
200 ppm
400 ppm
980 mg/m3 400 ppm
8.2 Exposure controls
Technical Control Measures Preferences of technical measure to prevent or control contact with the
product. Isolating process and personnel, mechanical ventilation (dilution
and local exhaust) and the regulation of process conditions. In case of
non-prevention or non-control, a proper protective wearing should be used.
Hygiene Measures Wash hands before eating, smoking, or using washroom facilities
Individual protection measures
Eye/Face Protection Avoid contact with eyes. Use safety eye wear with splash guards or side
shields (ANSI Z-87.1).
For EU: Safety glasses (with side shields) should be consistent with EN
166 or equivalent.
Skin Protection No precautions other than clean body covering clothing should be needed.
TB-7000 Page 6 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
Hand Protection Chemical protective gloves is not needed when handling this material.
Consistent with general hygienic practice for any material, skin contact
should be minimized. In case of using gloves, use gloves chemically
resistant to this material. Examples of preferred glove barrier materials
include: Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl
chloride ("PVC" or "vinyl"). Avoid gloves made of: Polyvinyl alcohol
("PVA").
For EU:
In case of using gloves, use chemical resistant gloves classified
according to standard SS-EN 374: Protective gloves against chemical and
microorganisms.
In case of prolonged contact or repeated contact, it is recommended
gloves with protection index grade 4 or higher (breakthrough time longer
than 120 minutes according to standard SS-EN 374).
When only short-term contact is expected, it is recommended gloves
with protective index class 1 or higher (breakthrough time longer than 10
minutes according to standard SS-EN 374).
Respiratory Protection For most conditions no respiratory protection should be needed; however,
if discomfort is experienced, use an approved air-purifying respirator.
Respiratory protection should be worn when there is a potential to exceed
the exposure limit requirements or guidelines. In the case of vapor
formation use a respirator with an approved filter. If there are no applicable
exposure limit requirements or guidelines, wear respiratory protection
when adverse effects, such as respiratory irritation or discomfort have
been experienced, or where indicated by your risk assessment process.
For EU: Use the following CE-approved filters: Filters against organic
gases with prefilter to particles, type AP2.
Ingestion Use good personal hygiene. Do not consume or store food in the work
area. Wash hands before smoking or eating.
SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
Appearance: Liquid
Color: Clear violet
Odor: Floral Alcohol
Odor Threshold: No data available
pH: 6.0 - 8.0
Melting Point: No data available
Boiling Point: >200°F (93.3°C)
Flash Point: 106°F (41°C)
Evaporation rate: 0.28
Flammability: Flammable
Upper flammability or explosive limits: No data available
Lower flammability or explosive limits: No data available
Vapor Pressure (mm Hg): 18.0
Vapor Density (air=1): 1.06
Relative Density: 8.17 lbs./gal at 20°C
Specific Gravity (H2O = 1) : 0.98
Solubility: Completely
Partition coefficient: No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Viscosity: No data available
Explosive properties: No data available
Oxidizing properties: No data available
9.2 Other information
VOC per Method 24 of EPA: 9.4% VOC by wt.
TB-7000 Page 7 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
SECTION 10 — STABILITY AND REACTIVITY
10.1 Reactivity
N/A
10.2 Chemical stability
Stable product at normal conditions.
10.3 Possibility of hazardous reactions
N/A
10.4 Conditions to avoid
Temperatures above 100°F (38°C) and below 34°F (1°C)
10.5 Incompatible materials
Strong Oxidizers.
10.6 Hazardous decomposition products
Thermal decomposition may yield carbon monoxide.
SECTION 11 — TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effects
Acute Eects
Inhalation Slight irritation
Eye Contact Slight irritation
Skin Contact Slight irritation
Ingestion N/A
Acute Toxicity
Isopropanol
CAS No.: 67-63-0
Oral Toxicity
Dermal Toxicity
Inhalation Toxicity
(Rat)
(Rabbit)
(Rat)
LD50 = 5,045 mg/kg
LD50 = 12,800 mg/kg
LC50 = 37.5 mg/l (4 h)
SECTION 12 — ECOLOGICAL INFORMATION
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
The product is aqueous.
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
Product:
Additional ecological information According to experience and to the information currently available, the
product has no harmful effects on the environment if used correctly as
intended.
SECTION 13 — DISPOSAL CONSIDERATIONS
13.1 Waste treatment methods
Product: Contain and collect material into plastic container. Water rinse and drain,
flush small amounts. Use sanitary landfill disposal. Follow state and local
regulations (RCRA; Subtitle D).
13.2 Additional information N/A
TB-7000 Page 8 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
SECTION 14 — TRANSPORT INFORMATION
DOT (Department of Transportation) Not regulated for transport
Classification for SEA transport
(IMO-IMDG)
Not regulated for transport
Classification for AIR transport
(IATA/ICAO)
Not regulated for transport
14.1 UN Number None
14.2 UN proper shipping name None
14.3 Transport hazard class(es) None
14.4 Packing group None
14.5 Environmental hazards None
14.6 Special precautions for user None
14.7 Transport in bulk according to Annex II of MARPOL and the IBC Code
Not applicable
SECTION 15 — REGULATORY INFORMATION
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US Regulations:
Superfund Amendment and Reauthorization Act of 1986 Title III (Emergency Planning and Community
Right-to-Know Act of 1986)
Section 302 No chemicals in this material are subject to the reporting requirements of
SARA Title III, Section 302.
Section 313 The following components are subject to reporting levels established by
SARA Title III, Section 313:
Isopropanol (CAS No.: 67-63-0)
Right To Know
Massachusetts RTK Pennsylvania RTK New Jersey RTK
Isopropanol
CAS No.: 67-63-0 X X X
California Proposition 65
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any
otherreproductive harm.
The components of this product are reported in the following inventories:
EINECS Status All components of this product are listed or excluded from the EINECS
Inventories
TSCA All components of this product are listed or excluded from listing on United
States Environmental Protection Agency Toxic Substances Control Act
(TSCA) Inventory
REACH This product does not required REACH registration according to
Regulation (EC) 1272/2008
15.2 Chemical Safety Assessment N/A
TB-7000 Page 9 of 9 © 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Website: DescoIndustries.com
SECTION 16 — OTHER INFORMATION
HMIS RATING Health 1, Flammability 2, Reactivity 0, Personal Protection B
NFPA RATING Special Hazard: N/A, Health: 1, Flammability: 2, Instability: 0
SDS Updated 2018-06-26
Disclaimer
OTHER INFORMATION: This information relates only to the specific material designated and may not be valid for
such material used in combination with any other materials or in any other process. Such information is to the best of
the company’s knowledge and believed accurate and reliable as of the date indicated. However, no representation,
warranty or guarantee of any kind, express or implied, is made as to its accuracy, reliability or completeness and we
assume no responsibility for any loss, damage or expense, direct or consequential, arising out of use. It is the user’s
responsibility to satisfy himself as to the suitableness and completeness of such information for his own particular use.
