P4SMA series Vishay General Semiconductor Surface Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES * Low profile package * Ideal for automated placement * Glass passivated chip junction * Available in Unidirectional and Bidirectional 400 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % (300 W above 91 V) * Excellent clamping capability * Very fast response time * Low incremental surge resistance * Meets MSL level 1, per J-STD-020C, LF max peak of 260 C * Solder Dip 260 C, 40 seconds * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DO-214AC (SMA) MAJOR RATINGS AND CHARACTERISTICS V(BR) Unidirectional 6.8 V to 540 V V(BR) Bidirectional 6.8 V to 220 V PPPM 400 W, 300 W PD 3.3 W IFSM (Unidirectional only) 40 A Tj max. 150 C DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use CA suffix (e.g. P4SMA10CA). Electrical characteristics apply in both directions. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication. MECHANICAL DATA Case: DO-214AC (SMA) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: For unidirectional types the band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 s waveform SYMBOL (1)(2) (Fig. 1) Peak pulse current with a 10/1000 s waveform (1) (Fig. 3) Power dissipation on infinite heatsink, TA = 50 C Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) Operating junction and storage temperature range VALUE UNIT PPPM 400 W IPPM see next table A PD 3.3 W IFSM 40 A TJ, TSTG - 65 to + 150 C Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2. Rating is 300 W above 91 V (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal Document Number 88367 14-Sep-06 www.vishay.com 1 P4SMA series Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PART NUMBER P4SMA6.8A P4SMA7.5A P4SMA8.2A P4SMA9.1A P4SMA10A P4SMA11A P4SMA12A P4SMA13A P4SMA15A P4SMA16A P4SMA18A P4SMA20A P4SMA22A P4SMA24A P4SMA27A P4SMA30A P4SMA33A P4SMA36A P4SMA39A P4SMA43A P4SMA47A P4SMA51A P4SMA56A P4SMA62A P4SMA68A P4SMA75A P4SMA82A P4SMA91A P4SMA100A P4SMA110A P4SMA120A P4SMA130A P4SMA150A P4SMA160A P4SMA170A P4SMA180A P4SMA200A P4SMA220A P4SMA250A P4SMA300A P4SMA350A P4SMA400A P4SMA440A P4SMA480A P4SMA510A P4SMA540A DEVICE MARKING CODE BREAKDOWN VOLTAGE V(BR) AT IT (1) UNI BI MIN MAX 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 400A 440A 480A 510A 540A 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C - 6.45 7.13 7.79 8.65 9.5 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 105 114 124 143 152 162 171 190 209 237 285 333 380 418 456 485 513 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 231 263 315 368 420 462 504 535 567 TEST STAND-OFF CURRENT VOLTAGE IT VWM (V) (mA) 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.80 6.40 7.02 7.78 8.55 9.40 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102 111 128 136 145 154 171 185 214 256 300 342 376 408 434 459 MAXIMUM REVERSE LEAKAGE AT VWM MAXIMUM PEAK PULSE CURRENT ID (4) (A) IPPM (2) (A) 1000 500 200 50.0 10.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 38.1 35.4 33.1 29.9 27.6 25.6 24.0 22.0 18.9 17.8 15.9 14.4 13.1 12.0 10.7 9.7 8.8 8.0 7.4 6.7 6.2 5.7 5.2 4.7 4.3 3.9 3.5 3.2 2.2 2.0 1.8 1.7 1.4 1.4 1.3 1.2 1.1 0.90 0.87 0.73 0.62 0.55 0.50 0.46 0.43 0.41 MAXIMUM MAXIMUM CLAMPING TEMPERATURE VOLTAGE OF V(BR) AT IPPM (%/C) VC (V) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 104 113 125 137 152 165 179 207 219 234 246 274 328 344 414 482 548 602 658 698 740 0.057 0.061 0.065 0.068 0.073 0.075 0.078 0.081 0.084 0.086 0.089 0.090 0.092 0.090 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.106 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 Note: (1) Pulse test: tp 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bidirectional types with VR 10 Volts and less, the ID limit is doubled (5) VF = 3.5 V at IF = 25 A (uni-directional only) www.vishay.com 2 Document Number 88367 14-Sep-06 P4SMA series Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Thermal resistance junction to ambient SYMBOL VALUE RJA 120 C/W RJL 30 C/W air (1) Thermal resistance junction to leads UNIT Note: (1) Mounted on minimum recommended pad layout ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE P4SMA6.8A-E3/61 0.064 61 1800 7" Diameter Plastic Tape & Reel P4SMA6.8A-E3/5A 0.064 5A 7500 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25 C 10 P4SMA6.8A P4SMA91A P4SMA100A P4SMA220A 1 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0.1 0.1 s IPPM - Peak Pulse Current, % IRSM PPPM, Peak Pulse Power (kW) 100 Peak Value IPPM 100 Half Value - IPP 2 IPPM 50 10/1000 sec Waveform as defined by R.E.A. td 0 1.0 s 10 s 100 s 1.0 ms 0 10 ms 1.0 2.0 3.0 4.0 t - Time (ms) td - Pulse Width (s) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 100 10000 CJ, Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % Tj = 25 C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 sec 75 50 25 0 Tj = 25 C f = 1.0 MHz Vsig = 50 mVp-p Measured at Stand-off Voltage VWM 1000 Uni-Directional 100 Bi-Directional 10 0 25 50 75 100 125 150 175 200 TJ - Initial Temperature (C) Figure 2. Pulse Power or Current versus Initial Junction Temperature Document Number 88367 14-Sep-06 1 10 100 200 V(BR) - Breakdown Voltage (V) Figure 4. Typical Junction Capacitance www.vishay.com 3 P4SMA series Vishay General Semiconductor 200 Peak Forward Surge Current (A) Transient Thermal Impedance (C/W) 1000 100 10 1 0.001 Tj = Tj max. 8.3 ms Single Half Sine-Wave 100 50 10 0.01 0.1 1 10 100 1000 1 5 10 50 100 Number of Cycles at 60 Hz tp - Pulse Duration (s) Figure 5. Typical Transient Thermal Impedance Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.074 MAX. (1.88 MAX.) 0.066 MIN. (1.68 MIN.) 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.208 (5.28) REF 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.060 MIN. (1.52 MIN.) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) www.vishay.com 4 Document Number 88367 14-Sep-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1