VS-E SERIES VS150E/A VS100E/L VS-ESeries VS75E Y E A R S VS50E UL60950-1 CSA60950-1 Features R S Low Voltage Directive UL60950-1 Electrical Appliance CSA60950-1 and Material Safety Law (Input Voltage 100VAC) warranty EN60950-1(TUV) Low Voltage Directive Electrical Appliance and Material Safety Law (Input Voltage 100VAC) Applications COMP warranty Electrical Appliance and Material Safety Law (Input Voltage 100VAC) Others VS 50E -5 / COMP COM Blank : PCB Type A : With cover L : L plate type Y E A R S warranty Rated Output Voltage Rated Output Power Series Name Others COM Low Voltage Directive Model name identification method * High efficiency and low standby power. * 30% Miniaturization from previous models. * 100% load at 50C, suitable for industrial equipment. Y E * 5 Years warranty (conditions applied) A EN60950-1(TUV) EN60950-1(TUV) VS-ESeries VS-ESeries 1 1 Single Output 50 - 150W Others Conformity to RoHS Directive COM This means that, in conformity with EU Directive 2002/95/ EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Product line up Model Output Voltage VS50E VS75E VS100E VS150E 50W 75W 100W 150W Output Current Efficiency(Typ) Output Current Efficiency(Typ) Output Current Efficiency(Typ) Output Current Efficiency(Typ) 3.3V 10A 80% 15A 80% 20A 80% 30A 80% 5V 10A 85% 15A 85% 20A 85% 30A 86% 12V 4.3A 85% 6.3A 85% 8.5A 85% 12.5A 87% 15V 3.5A 85% 5.0A 85% 7.0A 85% 10.0A 87% 24V 2.5A 85% 3.2A 86% 4.3A 86% 6.3A 87% 48V 1.3A 87% 1.6A 87% 2.2A 87% 3.2A 88% Option line up Model VS50E VS75E VS100E 50W 75W 100W VS150E 150W Output Voltage /A /L /CO2 /FV /A /L /CO2 /FV /A /L /CO2 /FV /A /L /CO2 /FV 3.3V 5V 12V 15V 24V 48V All specifications are subject to change without notice. VS-E- VS 50E VS50E Specifications MODEL ITEMS/UNITS Input Voltage Range (*2) Frequency (*2) Hz Efficiency (Typ) (*1) % 80 Current (Typ) (*1) A 0.9 (*1)(*11) A Inrush Current (Typ) (*8) mA Nominal Voltage VDC 85 87 1.1 1.3 30 at Cold Start Less than 0.5 3.3 5 10 33.0 50.0 12 15 24 48 4.3 3.5 2.5 1.3 62.4 52.5 60.0 48 60 96 192 Maximum Load Regulation (*3)(*5) mV 40 96 120 150 240 (*3) Less than 0.02% / C Maximum Ripple & Noise(0Ta70C) (*3) mVp-p 120 150 200 Maximum Ripple & Noise(-10Ta<0C) (*3) mVp-p 160 180 240 (*1) ms Over Current Protection (*6) Over Voltage Protection (*7) VDC Storage Temperature 20 2.97 - 3.63 A Parallel Operation Operating Temperature 4.5 - 5.5 10.8 - 13.2 4.51 - 3.67 - 2.62 - 1.36 - 5.75 - 6.75 13.8 - 16.2 17.3 - 20.3 27.6 - 32.4 55.2 - 64.8 10.5 3.80 - 4.46 13.5 - 16.5 (*9) C Convection : -10 - +70 (-10 - +50:100%, +60:70%, +70:20%) C -30 - +85 %RH 30 - 90 (No dewdrop) Storage Humidity %RH 10 - 95 (No dewdrop) At no operating, 10 - 55Hz (Sweep for 1min) 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Input - FG : 2kVAC (10mA), Input - Output : 2kVAC (10mA) Withstand Voltage Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M at 25C and 70%RH Output - FG : 500VDC Designed to meet UL60950-1, CSA60950-1, EN60950-1, EN50178(OV II), Safety Standards DENAN (Section 2). Standards EMI Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3), Immunity Size (WxHxD) 43.2 - 52.8 - Operating Humidity Weight (Typ) 21.6 - 26.4 Possible Vibration Mechanical 47 - 63 51.6 Series Operation Isolation VS50E-48 20 Voltage Adjustable Range (*12) VDC Environment VS50E-24 (*3)(*4) mV Temperature Coefficient W VS50E-15 Maximum Line Regulation Hold-up Time (Typ) Function VS50E-12 AC 85 - 132 A Maximum Power VS50E-5 V Leakage Current Maximum Current Output VS50E-3 -5(Level 2,3), -6(Level 3), -8(Level 4), -11 g (*10) mm 150 50 x 23 x 132 ( Refer to Outline Drawing ) *Read instruction manual carefully, before using the power supply unit. (*1) At 100VAC, Ta=25C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 120VAC(50/60Hz). (*3) Please refer to Fig. A for measurement of line & load regulation and ripple voltage. (*4) 85 - 132VAC, constant load. (*5) No load-Full load, constant input voltage. (*6) Fold back current limit with automatic recovery. Avoid to operate at over load or short circuit condition for more than 30seconds. (*7) OVP circuit will shut the output down, manual reset (Re power on). (*8) Measured by the each measuring method of UL, CSA, EN and DENAN(at 60Hz), Ta=25C. (*9) Ratings - Derating at standard mounting. Refer to output derating curve(A239-01-02_). - Load (%) is percent of maximum output power or maximum output current, whichever is greater. (*10) Not include lead length on solder side. (*11) Inrush Current suppressors type. Limits vary according to ambient temperature and in case of re-entry. (*12) /FV option is for fixed output voltage. VS-E- All specifications are subject to change without notice. VS 50E Outline Drawing VS50E Standard Specification, /CO2, /FV (127.5) LEAD CUT LESS THAN 3mm VOLTAGE ADJUSTMENT (5) VR51 CN51 1 2 OUTPUT 3 + 4 INPUT (5) 5 4- 3.5 (TAPPED HOLES) (30) 1 L (29) 501 400.5 3 N (18) COMPONENT SIDE CN1 5 231 NAME PLATE 5 CONNECTOR USED 1220.5 1321 MATCHING HOUSINGS & PIN.(NOT INCLUDED WITH THE PRODUCT.) MANUFACT QTY PART NAME PIN HEADER (INPUT SIDE CN1) B3P5-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN1) VHR-5N J.S.T. 1 PIN HEADER(OUTPUT SIDE CN51) B4P-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN51) VHR-4N J.S.T. 1 J.S.T. 7 J.S.T. - * OUTPUT CURRENT OF EACH CONNECTOR PIN MUST BE LESS THAN 5A. PART DESCRIPTION OPEN HARNESS PART DESCRIPTION PART NAME MANUFACT QTY SVH-21T-P1.1 Terminal pin BVH-21T-P1.1 HAND CRIMPING TOOL 1 CN1 VR51 CN51 OUTPUT + 1 2 3 4 NAME PLATE CN1 5 3N INPUT 1L 601 200.5 400.5 5 3 4-M3 (FOR MOUNTING) VOLTAGE ADJUSTMENT R1.75 (FOR MOUNTING) 20 10 361 VR51 CN51 - 1 2 OUTPUT 3 + 4 4-M3 (FOR MOUNTING) VOLTAGE ADJUSTMENT R1.75 (FOR MOUNTING) 361 1500.5 1621 6 2- 3.5 (FOR MOUNTING) COMPONENT SIDE NAME PLATE 30 INPUT 20 10 L VS50E/L 601 200.5 400.5 N HA-2-IN HA-3-OU 30 VS50E/A YC-160R PART NAME INPUT OUTPUT 2- 3.5 (FOR MOUNTING) 3.5(FOR MOUNTING) R1.75 (FOR MOUNTING) 6 1500.5 1621 R1.75 (FOR MOUNTING) 15 10 10 3.5(FOR MOUNTING) 6 15 2-M3 (FOR MOUNTING) 1500.5 6 2-M3 (FOR MOUNTING) 1500.5 Output Derating VS50E Standard Specification, /CO2, /FV, /L VS50E-3, -5, -12, -15, -24 MOUNTING A - D MOUNTING E 10 20 30 40 50 60 70 80 Ta(C) 120 100 80 70 60 40 20 0 -10 0 LOAD(%) 80 LOAD(%) 100 80 70 60 0 -10 MOUNTING A - D MOUNTING E 0 10 20 30 40 Ta (C) CN1 10 20 30 40 50 60 70 80 Ta(C) MOUNTING A (STANDARD MOUNTING) FIN MOUNTING B MOUNTING C CN1 CN1 70 MOUNTING D MOUNTING E 60 40 60 70 All specifications are subject to change without notice. 0 -10 DON'T USE MOUNTING A - C MOUNTING D, E 20 50 MOUNTING A - C MOUNTING D, E CN1 OUTPUT DERATING CURVE 120 100 20 CN1(INPUT) VS50E-48/A OUTPUT DERATING CURVE 40 FIN OUTPUT DERATING CURVE CN1 VS50E/A VS50E-3/A, -5/A, -12/A, -15/A, -24/A 120 VS50E-48 LOAD(%) LOAD(%) 120 100 80 70 60 40 20 0 -10 0 OUTPUT DERATING CURVE 0 10 20 30 Ta (C) 40 50 60 70 VS-E- VS 75E VS75E Specifications MODEL ITEMS/UNITS Input Voltage Range (*2) Frequency (*2) Hz Efficiency (Typ) (*1) % 80 Current (Typ) (*1) A 1.1 (*1)(*12) A Inrush Current (Typ) (*9) mA Nominal Voltage VDC W 86 87 47 - 63 85 1.6 30A at Cold Start Less than 0.5 3.3 5 15 49.5 75.0 12 15 24 48 6.3 5.0 3.2 1.6 75.6 75.0 48 60 96 192 Maximum Load Regulation (*3)(*6) mV 40 96 120 150 240 76.8 Temperature Coefficient (*3) Maximum Ripple & Noise(0Ta70C) (*3)(*4) mVp-p 120 150 200 Maximum Ripple & Noise(-10Ta<0C) (*3)(*4) mVp-p 160 180 240 Hold-up Time (Typ) (*1) ms Less than 0.02% / C Over Current Protection (*7) Over Voltage Protection (*8) VDC 20 2.97 - 3.63 A Parallel Operation Storage Temperature 4.5 - 5.5 10.8 - 13.2 6.61 - 5.25 - 3.36 - 1.68 - 5.75 - 6.75 13.8 - 16.2 17.3 - 20.3 27.6 - 32.4 55.2 - 64.8 15.7 3.80 - 4.46 13.5 - 16.5 (*10) C Convection : -10 - +70 (-10 - +50:100%, +60:70%, +70:20%) C -30 - +85 %RH 30 - 90 (No dewdrop) Storage Humidity %RH 10 - 95 (No dewdrop) At no operating, 10 - 55Hz (Sweep for 1min) 19.6m/s Constant, X, Y, Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Input - FG : 2kVAC (10mA), Input - Output : 2kVAC (10mA) Withstand Voltage Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M at 25C and 70%RH Output - FG : 500VDC Designed to meet UL60950-1, CSA60950-1, EN60950-1, EN50178(OV II), Safety Standards DENAN (Section 2). Standards EMI Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3), Immunity Size (WxHxD) 43.2 - 52.8 - Operating Humidity Weight (Typ) 21.6 - 26.4 Possible Vibration Mechanical VS75E-48 20 Operating Temperature Isolation VS75E-24 (*3)(*5) mV Series Operation Environment VS75E-15 Maximum Line Regulation Voltage Adjustable Range (*13) VDC Function VS75E-12 AC 85 - 132 A Maximum Power VS75E-5 V Leakage Current Maximum Current Output VS75E-3 -5(Level 2,3), -6(Level 3), -8(Level 4), -11 g (*11) mm 200 50 x 29 x 150 ( Refer to Outline Drawing ) *Read instruction manual carefully, before using the power supply unit. (*1) At 100VAC, Ta=25C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 120VAC(50/60Hz). (*3) Please refer to Fig. A for measurement of line & load regulation and ripple voltage. (*4) For start up at low ambient temperature and low input voltage, output ripple noise might not meet specification. However, there is no overshoot at start up and output ripple noise specification can be met after one second. (*5) 85 - 132VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) 3.3, 5V model : Constant current limit and hiccup with automatic recovery. 12 - 48V model : Constant current limit with automatic recovery. Avoid to operate at over load or short circuit condition for more than 30seconds. (*8) OVP circuit will shut the output down, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and DENAN (at 60Hz), Ta=25C. (*10) Ratings - Derating at standard mounting. Refer to output derating curve(A240-01-02_). - Load (%) is percent of maximum output power or maximum output current, whichever is greater. (*11) Not include lead length on solder side. (*12) Inrush Current suppressors type. Limits vary according to ambient temperature and in case of re-entry. (*13) /FV option is for fixed output voltage. VS-E- All specifications are subject to change without notice. VS 75E Outline Drawing VS75E Standard Specification, /CO2, /FV (108.5) LEAD CUT LESS THAN 3mm CN1 L - INPUT OUTPUT 4- 3.5 (TAPPED HOLES) VR51 + (22) N 1 1 2 3 4 5 6 CN51 5 (6) (29) 501 400.5 (5) 3 (5) COMPONENT SIDE 5 NAME PLATE 291 VOLTAGE ADJUSTMENT 1400.5 5 1501 CONNECTOR USED MATCHING HOUSINGS & PIN.(NOT INCLUDED WITH THE PRODUCT.) MANUFACT QTY PART DESCRIPTION OPEN HARNESS PART DESCRIPTION PART NAME PIN HEADER (INPUT SIDE CN1) B3P5-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN1) VHR-5N J.S.T. 1 PIN HEADER(OUTPUT SIDE CN51) B6P-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN51) VHR-6N J.S.T. 1 J.S.T. 9 J.S.T. - * OUTPUT CURRENT OF EACH CONNECTOR PIN MUST BE LESS THAN 5A. PART NAME MANUFACT QTY SVH-21T-P1.1 Terminal pin BVH-21T-P1.1 HAND CRIMPING TOOL VS75E/A 4-M4 (FOR MOUNTING) 451 1 2 3 4 5 6 OUTPUT + 1690.5 1801 VOLTAGE ADJUSTMENT OUTPUT 451 5.5 R2.25 (FOR MOUNTING) 1 + R2.25 (FOR MOUNTING) 2 3 4 5 6 R2.25 (FOR MOUNTING) NAME PLATE 15 15 15 2-M4 (FOR MOUNTING) 1690.5 VOLTAGE ADJUSTMENT 1690.5 1801 4.5(FOR MOUNTING) 15 4.5(FOR MOUNTING) 5.5 CN51 VR51 VR51 5.5 1L COMPONENT SIDE INPUT 20 10 NAME PLATE - 4-M4 (FOR MOUNTING) CN1 5 3N 30 1 2- 4.5(FOR MOUNTING) R2.25 (FOR MOUNTING) 601 200.5 400.5 CN51 3 20 10 L 601 200.5 400.5 CN1 5 INPUT HA-2-IN HA-4-OU VS75E/L 2- 4.5(FOR MOUNTING) N YC-160R PART NAME INPUT OUTPUT 5.5 2-M4 (FOR MOUNTING) 1690.5 Output Derating VS75EStandard Specification, /CO2, /FV, /L OUTPUT DERATING CURVE 120 100 100 80 80 70 60 40 MOUNTING A, B MOUNTING C - E 20 0 -10 OUTPUT DERATING CURVE 120 LOAD(%) LOAD(%) VS75E/A 70 60 40 MOUNTING A, B MOUNTING C - E 20 0 10 20 30 40 50 60 70 0 80 Ta (C) FIN CN1 -10 0 10 20 30 40 Ta (C) 50 60 70 CN1 CN1(INPUT) CN1 MOUNTING A (STANDARD MOUNTING) MOUNTING B All specifications are subject to change without notice. CN1 FIN MOUNTING C MOUNTING D CN1 MOUNTING E DON'T USE VS-E- VS 100E VS100E Specifications MODEL ITEMS/UNITS Input Voltage Range (*2) Frequency (*2) Hz Efficiency (Typ) (*1) % 80 Current (Typ) (*1) A 1.6 (*1)(*12) A Inrush Current (Typ) (*9) mA Nominal Voltage VDC W 86 87 47 - 63 85 2.1 30A at Cold Start Less than 0.5 3.3 5 20 66.0 100.0 12 15 24 48 8.5 7.0 4.3 2.2 105.6 102.0 105.0 103.2 48 60 96 192 Maximum Load Regulation (*3)(*6) mV 40 96 120 150 240 Temperature Coefficient (*3) Maximum Ripple & Noise(0Ta70C) (*3)(*4) mVp-p 120 150 200 Maximum Ripple & Noise(-10Ta<0C) (*3)(*4) mVp-p 160 180 240 Hold-up Time (Typ) (*1) ms Less than 0.02% / C Over Current Protection (*7) Over Voltage Protection (*8) VDC 20 2.97 - 3.63 A Parallel Operation Storage Temperature 4.5 - 5.5 10.8 - 13.2 8.92 - 7.35 - 4.51 - 2.31 - 5.75 - 6.75 13.8 - 16.2 17.3 - 20.3 27.6 - 32.4 55.2 - 64.8 21.0 3.80 - 4.46 13.5 - 16.5 (*10) C Convection : -10 - +70 (-10 - +50:100%, +60:70%, +70:20%) C -30 - +85 %RH 30 - 90 (No dewdrop) Storage Humidity %RH 10 - 95 (No dewdrop) At no operating, 10 - 55Hz (Sweep for 1min) 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Input - FG : 2kVAC (10mA), Input - Output : 2kVAC (10mA) Withstand Voltage Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M at 25C and 70%RH Output - FG : 500VDC Designed to meet UL60950-1, CSA60950-1, EN60950-1, EN50178(OV II), Safety Standards DENAN (Section 2). Standards EMI Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3), Immunity Size (WxHxD) 43.2 - 52.8 - Operating Humidity Weight (Typ) 21.6 - 26.4 Possible Vibration Mechanical VS100E-48 20 Operating Temperature Isolation VS100E-24 (*3)(*5) mV Series Operation Environment VS100E-15 Maximum Line Regulation Voltage Adjustable Range (*13) VDC Function VS100E-12 AC 85 - 132 or DC 110 - 175 A Maximum Power VS100E-5 V Leakage Current Maximum Current Output VS100E-3 -5(Level 2,3), -6(Level 3), -8(Level 4), -11 g (*11) mm 290 62 x 29 x 155 ( Refer to Outline Drawing ) *Read instruction manual carefully, before using the power supply unit. (*1) At 100VAC, Ta=25C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 120VAC(50/60Hz). (*3) Please refer to Fig. A for measurement of line & load regulation and ripple voltage. (*4) For start up at low ambient temperature and low input voltage, output ripple noise might not meet specification. However, there is no overshoot at start up and output ripple noise specification can be met after one second. (*5) 85 - 132VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) 3.3, 5V model: Constant current limit and hiccup with automatic recovery. 12 - 48V model: Constant current limit with automatic recovery. Avoid to operate at over load or short circuit condition for more than 30seconds. (*8) OVP circuit will shut the output down, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and DENAN(at 60Hz), Ta=25C. (*10) Ratings - Derating at standard mounting. Refer to output derating curve(A241-01-02_). - Load (%) is percent of maximum output power or maximum output current, whichever is greater. (*11) Not include lead length on solder side. (*12) Inrush Current suppressors type. Limits vary according to ambient temperature and in case of re-entry. (*13) /FV option is for fixed output voltage. VS-E- All specifications are subject to change without notice. VS 100E Outline Drawing VS100E Standard Specification, /CO2, /FV LEAD CUT LESS THAN 3mm (112) (5) CN51 CN1 N 1 L OUTPUT INPUT 4- 3.5 (TAPPED HOLES) NAME PLATE 291 + VR51 (6) 3 5 (22) 5 1 2 3 4 5 6 7 8 (26) (5) 520.5 621 COMPONENT SIDE VOLTAGE ADJUSTMENT 5 1450.5 1551 CONNECTOR USED MATCHING HOUSINGS & PIN.(NOT INCLUDED WITH THE PRODUCT.) MANUFACT QTY OPEN HARNESS PART DESCRIPTION PART NAME PIN HEADER (INPUT SIDE CN1) B3P5-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN1) VHR-5N J.S.T. 1 PIN HEADER(OUTPUT SIDE CN51) B8P-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN51) VHR-8N J.S.T. 1 J.S.T. 11 J.S.T. - PART DESCRIPTION * OUTPUT CURRENT OF EACH CONNECTOR PIN MUST BE LESS THAN 5A. SVH-21T-P1.1 Terminal pin BVH-21T-P1.1 HAND CRIMPING TOOL 451 CN51 1 2 3 4 5 6 7 8 NAME PLATE OUTPUT + VR51 6 1730.5 1851 VOLTAGE ADJUSTMENT OUTPUT + VR51 6 1 2 3 4 5 6 7 8 VOLTAGE ADJUSTMENT 1730.5 1851 4.5(FOR MOUNTING) R2.25 (FOR MOUNTING) 15 15 4.5(FOR MOUNTING) - NAME PLATE 5 3N 1 L INPUT CN1 451 R2.25 (FOR MOUNTING) R2.25 (FOR MOUNTING) CN51 - 721 250.5 450.5 INPUT 4-M4 (FOR MOUNTING) COMPONENT SIDE R2.25 (FOR MOUNTING) 24 14 CN1 5 3 1 2- 4.5(FOR MOUNTING) 36 721 250.5 450.5 4-M4 (FOR MOUNTING) 24 14 L HA-2-IN HA-5-OU VS100E/L 2- 4.5(FOR MOUNTING) N YC-160R INPUT OUTPUT 36 VS100E/A PART NAME PART NAME MANUFACT QTY 2-M4 (FOR MOUNTING) 20 20 2-M4 (FOR MOUNTING) 6 173.10.5 6 1730.5 Output Derating VS100EStandard Specification, /CO2, /FV, /L 120 100 100 80 80 70 60 40 MOUNTING A, B MOUNTING C - E 20 0 -10 0 10 20 30 40 OUTPUT DERATING CURVE 120 LOAD(%) LOAD(%) VS100E/A OUTPUT DERATING CURVE 70 60 40 MOUNTING A, B MOUNTING C, D MOUNTING E 20 50 60 70 0 80 -10 0 10 20 Ta (C) FIN CN1 30 40 Ta (C) 50 55 60 70 CN1 CN1(INPUT) CN1 MOUNTING A (STANDARD MOUNTING) MOUNTING B All specifications are subject to change without notice. CN1 FIN MOUNTING C CN1 MOUNTING D MOUNTING E DON'T USE VS-E- VS 150E VS150E Specifications MODEL ITEMS/UNITS Input Voltage Range (*2) Frequency (*2) Hz Efficiency (Typ) (*1) % 80 Current (Typ) (*1) A 2.4 (*1)(*12) A Inrush Current (Typ) (*9) mA Nominal Voltage VDC W 47 - 63 86 87 88 3.2 30A at Cold Start Less than 0.5 3.3 5 30 99.0 12 15 24 48 12.5 10.0 6.3 3.2 151.2 153.6 150.0 48 60 96 192 Maximum Load Regulation (*3)(*6) mV 40 96 120 150 240 Temperature Coefficient (*3) Maximum Ripple & Noise(0Ta70C) (*3)(*4) mVp-p 120 150 200 Maximum Ripple & Noise(-10Ta<0C) (*3)(*4) mVp-p 160 180 240 Hold-up Time (Typ) (*1) ms Less than 0.02% / C Over Current Protection (*7) Over Voltage Protection (*8) VDC 20 2.97 - 3.63 A Parallel Operation Storage Temperature 4.5 - 5.5 10.8 - 13.2 13.12 - 10.5 - 6.61 - 3.36 - 5.75 - 6.75 13.8 - 16.2 17.3 - 20.3 27.6 - 32.4 55.2 - 64.8 31.5 3.80 - 4.46 13.5 - 16.5 (*10) C Convection : -10 - +70 (-10 - +50:100%, +60:70%, +70:20%) C -30 - +85 %RH 30 - 90 (No dewdrop) Storage Humidity %RH 10 - 95 (No dewdrop) At no operating, 10 - 55Hz (Sweep for 1min) 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Input - FG : 2kVAC (10mA), Input - Output : 2kVAC (10mA) Withstand Voltage Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M at 25C and 70%RH Output - FG : 500VDC Designed to meet UL60950-1, CSA60950-1, EN60950-1, EN50178(OV II), Safety Standards DENAN (Section 2). Standards EMI Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3), Immunity Size (WxHxD) 43.2 - 52.8 - Operating Humidity Weight (Typ) 21.6 - 26.4 Possible Vibration Mechanical VS150E-48 20 Operating Temperature Isolation VS150E-24 (*3)(*5) mV Series Operation Environment VS150E-15 Maximum Line Regulation Voltage Adjustable Range (*13) VDC Function VS150E-12 AC 85 - 132 or DC 110 - 175 A Maximum Power VS150E-5 V Leakage Current Maximum Current Output VS150E-3 -5(Level 2,3), -6(Level 3), -8(Level 4), -11 g (*11) mm 390 75 x 34 x 160 ( Refer to Outline Drawing ) *Read instruction manual carefully, before using the power supply unit. (*1) At 100VAC, Ta=25C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 120VAC(50/60Hz). (*3) Please refer to Fig. A for measurement of line & load regulation and ripple voltage. (*4) For start up at low ambient temperature and low input voltage, output ripple noise might not meet specification. However, there is no overshoot at start up and output ripple noise specification can be met after one second. (*5) 85 - 132VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) 3.3, 5V model: Constant current limit and hiccup with automatic recovery. 12 - 48V model: Constant current limit with automatic recovery. Avoid to operate at over load or short circuit condition for more than 30seconds. (*8) OVP circuit will shut the output down, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and DENAN(at 60Hz), Ta=25C. (*10) Ratings - Derating at standard mounting. Refer to output derating curve(A242-01-02_). - Load (%) is percent of maximum output power or maximum output current, whichever is greater. (*11) Not include lead length on solder side. (*12) Inrush Current suppressors type. Limits vary according to ambient temperature and in case of re-entry. (*13) /FV option is for fixed output voltage. VS-E- All specifications are subject to change without notice. VS 150E Outline Drawing VS1150E Standard Specification, /CO2, /FV (108) (5) CN52 1 2 3 4 5 6 7 751 650.5 (5) OUTPUT + 5 N INPUT 1 L CN1 4- 3.5 (TAPPED HOLES) CN51 5 VR51 341 NAME PLATE VOLTAGE ADJUSTMENT 1500.5 1601 5 CONNECTOR USED 1 2 3 4 5 6 (7) (33) 3 (50) COMPONENT SIDE (22) LEAD CUT LESS THAN 3mm MATCHING HOUSINGS & PIN.(NOT INCLUDED WITH THE PRODUCT.) MANUFACT QTY PART DESCRIPTION OPEN HARNESS PART DESCRIPTION PART NAME PIN HEADER (INPUT SIDE CN1) B3P5-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN1) VHR-5N J.S.T. 1 PIN HEADER(OUTPUT SIDE CN51) B6P-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN51) VHR-6N J.S.T. 1 PIN HEADER(OUTPUT SIDE CN52) B7P-VH(LF)(SN) J.S.T. 1 SOCKET HOUSING (CN52) VHR-7N J.S.T. 1 J.S.T. 11 J.S.T. - * OUTPUT CURRENT OF EACH CONNECTOR PIN MUST BE LESS THAN 5A. PART NAME MANUFACT QTY SVH-21T-P1.1 Terminal pin BVH-21T-P1.1 HAND CRIMPING TOOL VS150E/A YC-160R PART NAME INPUT HA-2-IN + : HA-6-OU OUTPUT - : HA-7-OU VS150E/L 2- 4.5(FOR MOUNTING) 2- 4.5(FOR MOUNTING) 4-M4 (FOR MOUNTING) VR51 25 15 NAME PLATE 471 6 OUTPUT + CN51 1760.5 1881 3N 1L OUTPUT + INPUT VR51 CN51 471 VOLTAGE ADJUSTMENT 6 R2.25 (FOR MOUNTING) 1760.5 1881 R2.25 (FOR MOUNTING) NAME PLATE 2-M4 (FOR MOUNTING) 20 15 20 1 2 3 4 5 6 4.5(FOR MOUNTING) 2-M4 (FOR MOUNTING) 6 R2.25 (FOR MOUNTING) VOLTAGE ADJUSTMENT 15 4.5(FOR MOUNTING) 5 1 2 3 4 5 6 7 43 1 2 3 4 5 6 1 - CN1 851 350.5 550.5 3 R2.25 (FOR MOUNTING) - 25 15 5 CN52 43 INPUT L 851 350.5 550.5 N 1 2 3 4 5 6 7 CN1 4-M4 (FOR MOUNTING) CN52 COMPONENT SIDE 6 1760.5 1760.5 Output Derating VS150E/A VS150E Standard Specification, /CO2, /FV, /L OUTPUT DERATING CURVE 100 100 80 80 70 60 40 MOUNTING A MOUNTING B - E 20 0 -10 0 10 20 30 40 OUTPUT DERATING CURVE 120 LOAD(%) LOAD(%) 120 70 60 MOUNTING A MOUNTING B - E 40 20 50 60 70 0 80 Ta (C) FIN CN1 -10 0 10 20 30 40 Ta (C) 50 55 60 70 CN1 CN1(INPUT) CN1 MOUNTING A (STANDARD MOUNTING) MOUNTING B All specifications are subject to change without notice. CN1 FIN MOUNTING C MOUNTING D CN1 MOUNTING E DON'T USE VS-E-1003E VS-E-