Description: Featuring an anti-fatigue, ergonomic air cell molded structure, this design offers cushioning and insulation to reduce fatigue in standing personnel. The interlocking feature allows the design of custom lengths and the conductive rubber insures rapid charge drainage. Beveled edges provide a gentle rise for safety and a finished appearance. When interlocked, the sections of material maintain conductivity automatically. This rubber mat resists damage from heat, abrasion, and common solvents. In lengthy applications, the use of ground connection for every 5 mat sections is recommended. RoHS Compliance Statement None of the following materials are intentionally added in manufacturing this product: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC Article 4.1. See Desco Industries Inc. letter on-line at Desco.com. Black Item #40910 STAND ALONE MAT Includes 14234 ground kit Item #40915 CENTER SECTION Item #40920 END SECTION Limited Lifetime Warranty Desco warrants for one year that Statfree(R) matting products will be free of defects in materials and workmanship and will guarantee dissipative/ conductive mat properties for the life of the mat. Damage to matting caused by misuse of any kind, including using inappropriate cleaners is not covered by Desco Limited Warranty. Made in America STATFREE ATM CONDUCTIVE RUBBER, AIR CELL INTERLOCKING, .500" DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172 (c) 2008 DESCO INDUSTRIES INC. Employee Owned MATERIAL STATFREE ATM DRAWING PM-95 DATE: February 2008 Specifications: Electrical Properties: Property RTG Resistance: RTT Resistance: Test Method ANSI ESD S7.1 ANSI ESD S7.1 Value <10E6 Ohms <10E6 Ohms Electrical Properties obtained by testing to industrial standards by an independent testing laboratory @ 10 Volts and 50% relative humidity unless otherwise specified. Complete text of the test report is available upon request. Disclaimer: All statements, technical data, and recommendations contained herein are based upon tests we believe to be reliable. However, the accuracy or completeness thereof is not guaranteed. The proper and correct applications of products and data is the responsibility of the user. Statements or recommendations not contained herein shall have no force or effect unless embodied in a written agreement signed by authorized officers of Desco Industries, Inc. Per section 3 Definitions of Floor standard ESD STM7.1-2001 "Conductive Flooring Material: A floor material that has a resistance to ground of less than 10E6 ohms." (c) 2006 DESCO INDUSTRIES INC. Employee Owned Construction: Thickness: Section Size: Surface: Grounding: Weight: Hardness: Color: Cleaning: Molded homogeneous conductive rubber 0.50" Nominal (12.7mm) 28" x 36" nominal Light texture embossing Mats must be properly grounded to insure proper electrical performance. Ask for Technical Bulletin TB-2000 for proper grounding instructions. 10 lbs. per section 65 Shore A Black For optimum electrical performance, surfaces must be cleaned regularly with a mild detergent and water solution. We suggest using ReztoreTM Surface & Mat Cleaner Item #10435 or Static-Wipes Item #10600. Do not use cleaners with silicone. Silicone build-up will create an insulative film on the surface.