DS1110L
3V 10-Tap Silicon Delay Line
2 ______________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS
(-40°C to +85°C, VCC = 2.7V to 3.6V.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Voltage on Any Pin Relative to Ground .................-0.5V to +6.0V
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-55°C to +125°C
Soldering Temperature...................See IPC/JEDEC J-STD-020A
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage VCC (Note 1) 2.7 3.3 3.6 V
High-Level Input Voltage VIH (Note 1) 2.2 VCC
+ 0.3 V
Low-Level Input Voltage VIL (Note 1) -0.3 +0.8 V
Input Leakage Current II0V ≤ VI ≤ VCC -1.0 +1.0 µA
Active Current ICC VCC = max, period = min (Note 2) 40 150 mA
High-Level Output Current IOH VCC = min, VOH = 2.3V -1.0 mA
Low-Level Output Current IOL VCC = min, VOL = 0.5V 12 mA
AC ELECTRICAL CHARACTERISTICS
(-40°C to +85°C, VCC = 2.7V to 3.6V.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Pulse Width tWI (Note 6) 10% of
tap 10 ns
+25°C, 3.3V (Notes 3, 5, 6, 7, 9) -2 Table 1 +2
0°C to +70°C (Notes 4–7) -3 Table 1 +3
Input to Tap Delay
(Delays ≤ 40ns)
tPLH
tPHL -40°C to +85°C (Notes 4–7) -4 Table 1 +4
ns
+25°C, 3.3V (Notes 3, 5, 6, 7, 9) -5 Table 1 +5
0°C to +70°C (Notes 4–7) -8 Table 1 +8
Input to Tap Delay
(Delays > 40ns)
tPLH
tPHL -40°C to +85°C (Notes 4–7) -13 Table 1 +13
%
Power-Up Time tPU 100 ms
Input Period Period (Note 8) 2 (tWI)ns