Rev.02.13.15_#1.3
AEE10W-M Series
Page 1
Technical Reference Note
AEE10W-M Series
10 Watts
DC/DC Converter
Total Power: 10 Watts
Input Voltage: 9 to 18 Vdc
18 to 36 Vdc
36 to 75Vdc
# of Outputs: Single, dual
Special Features
•4200VAC reinforced Insulation
•Insulation rated for 300VAC
Working Voltage
•Medical Safety to UL/CSA/EN/IEC
60601-1 3rd Edition
• 2 MOOP rated
• Wide 2:1 Input Voltage Range
• Excellent Efficiency up to 82%
• Fully regulated Output Voltage
• Low Leakage Current
• Operating Temperature Range –40
OC to +85 OC (With derating)
• Input Filter meets EN 55022, class
• A and FCC, level A
• Overload Protection
• 2”x 1” Plastic Package
• 3 Years Product Warranty
Safety
cUL/UL60950-1, CSA C22.2 No.
60950-1-03
UL60601-1, CSA C22.2 No.601-1
IEC/EN 60950-1, IEC/EN 60601-1
3rd Edition, 2 MOOP
IEC60950-1 CB report, cUL/UL
60950-1 certificate
UL60601-1 UL certificate
Product Descriptions
The AEE10W-M series is the new range of high performance dc-dc converter
modules with a reinforced insulation system. I/O- isolation voltage is specified for
4200VACrms. The product comes in a compact 2”x1” industry standard package.
All models provide Wide 2:1 input voltage range and fully regulated output
voltage regulation.
The AEE10W-M DC/DC converters offer an economical solution for demanding
applications in industrial and medical instrumentation requesting a certified
supplementary or reinforced insulation system to comply with industrial or latest
medical safety standards.
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 2
Technical Reference Note
Artesyn Embedded Technologies
Model Numbers
Options
Model Input Voltage Output Voltage Maximum Load Efficiency
AEE01A12-M 9-18Vdc 5V 1.6A 76%
AEE00B12-M 9-18Vdc 12V 0.835A 80%
AEE00BB12-M 9-18Vdc ±12 V ±0.417 80%
AEE00CC12-M 9-18Vdc ±15 V ±0.333 81%
AEE02A24-M 18-36Vdc 5V 2A 77%
AEE00B24-M 18-36Vdc 12V 0.835A 81%
AEE00BB24-M 18-36Vdc ±12 V ±0.417 81%
AEE00CC24-M 18-36Vdc ±15 V ±0.333 82%
AEE02A48-M 36-75Vdc 5V 2A 77%
AEE00B48-M 36-75Vdc 12V 0.835A 81%
AEE00BB48-M 36-75Vdc ±12 V ±0.417 81%
AEE00CC48-M 36-75Vdc ±15 V ±0.333 82%
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 3
Technical Reference Note
Artesyn Embedded Technologies
Table 1. Absolute Maximum Ratings:
Parameter Model Symbol Min Typ Max Unit
Input Surge Voltage
1 Sec.max
12V input Models
24V input Models
48V input Models
VIN,DC
-0.7
-0.7
-0.7
-
-
-
25
50
100
Vdc
Vdc
Vdc
Maximum Output Power All PO,max - - 10 W
Isolation Voltage
Input to output (60 seconds) All models 4200 - - Vac
Isolation Voltage
Input to output (1 second) All models 6000 - - Vac
Isolation Resistance All models 10 - - Gohm
Isolation Capacitance All models - 60 80 pF
Operating Ambient Temperature Range Natural Convection -40 +85 OC
Operating Case Temperature All TCASE - - +95 OC
Storage Temperature All TSTG -50 +125 OC
Humidity (non-condensing)
Operating
Non-operating
All
All
-
-
-
-
95
95
%
%
MTBF MIL-HDBK-
217F@25OC, Ground
Benign
1000000 - - Hours
Electrical Specifications
Absolute Maximum Ratings
Stress in excess of those listed in the “Absolute Maximum Ratings” may cause permanent damage to the power supply.
These are stress ratings only and functional operation of the unit is not implied at these or any other conditions above
those given in the operational sections of this TRN. Exposure to any absolute maximum rated condition for extended
periods may adversely affect the power supply’s reliability.
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 4
Technical Reference Note
Artesyn Embedded Technologies
Input Specifications
Table 2. Input Specifications:
Parameter Condition Symbol Min Nom Max Unit
Operating Input
Voltage, DC
12V input Models
24V Input Models
48V Input Models
All VIN,DC
9
18
36
12
24
48
18
36
75
Vdc
Start-Up Threshold
Voltage
12V input Models
24V Input Models
48V Input Models
All VIN,start
7
13
30
8
15
33
9
18
36
Vdc
Under Voltage Lockout
12V input Models
24V Input Models
48V Input Models
All VIN,under
-
-
-
-
-
-
8.5
16
34
Vdc
Input reflected ripple
current
12V input Models
24V Input Models
48V Input Models
0 to 500MHz,4.7uH
source impedance IIN,ripple
-
-
-
100
50
25
-
-
-
mA
Input Current
AEE01A12-M
AEE00B12-M
AEE00BB12-M
AEE00CC12-M
AEE02A24-M
AEE00B24-M
AEE00BB24-M
AEE00CC24-M
AEE02A48-M
AEE00B48-M
AEE00BB48-M
AEE00CC48-M
VIN,DC=VIN,nom IIN,full load
-
-
-
-
-
-
-
-
-
-
-
-
877
1044
1042
1028
541
516
516
508
271
258
258
254
-
-
-
-
-
-
-
-
-
-
-
-
mA
No Load Input Current
(VOOn, IO= 0A)
AEE01A12-M
AEE00B12-M
AEE00BB12-M
AEE00CC12-M
AEE02A24-M
AEE00B24-M
AEE00BB24-M
AEE00CC24-M
AEE02A48-M
AEE00B48-M
AEE00BB48-M
AEE00CC48-M
VIN,DC=VIN,nom IIN,no_load
-
-
-
-
-
-
-
-
-
-
-
-
30
30
30
30
20
20
20
20
10
10
10
10
-
-
-
-
-
-
-
-
-
-
-
-
mA
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 5
Technical Reference Note
Artesyn Embedded Technologies
Input Specifications
Table 2. Input Specifications con’t:
Parameter Condition Symbol Min Nom Max Unit
Efficiency @Max. Load
AEE01A12-M
AEE00B12-M
AEE00BB12-M
AEE00CC12-M
AEE02A24-M
AEE00B24-M
AEE00BB24-M
AEE00CC24-M
AEE02A48-M
AEE00B48-M
AEE00BB48-M
AEE00CC48-M
VIN,DC=VIN,nom
IO=IO,max
TA=25 OC
η
-
-
-
-
-
-
-
-
-
-
-
-
76%
80%
80%
81%
77%
81%
81%
82%
77%
81%
81%
82%
-
-
-
-
-
-
-
-
-
-
-
-
%
Leakage current All Modules VIN,DC=240Vdc
F=60HZ leakage - - 10 uA
Short circuit input
power All Modules - - 3000 mW
Internal Power
Dissipation All Modules - - 4000 mW
Internal Filter Type All Internal LC Filter (for EN55022,Class A )
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 6
Technical Reference Note
Artesyn Embedded Technologies
Table 3. Output Specifications:
Parameter Condition Symbol Min Nom Max Unit
Output Voltage Set-
Point
AEE01A12-M
AEE00B12-M
AEE00BB12-M
AEE00CC12-M
AEE02A24-M
AEE00B24-M
AEE00BB24-M
AEE00CC24-M
AEE02A48-M
AEE00B48-M
AEE00BB48-M
AEE00CC48-M
VIN,DC=VIN,nom
IO=IO,max
TA=25 OC
VO
-
-
-
-
-
-
-
-
-
-
-
-
5V
12V
±12 V
±15 V
5V
12V
±12 V
±15 V
5V
12V
±12 V
±15 V
-
-
-
-
-
-
-
-
-
-
-
-
Vdc
Output Current
AEE01A12-M
AEE00B12-M
AEE00BB12-M
AEE00CC12-M
AEE02A24-M
AEE00B24-M
AEE00BB24-M
AEE00CC24-M
AEE02A48-M
AEE00B48-M
AEE00BB48-M
AEE00CC48-M
Convection cooling IO
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.6A
0.835A
±0.417
±0.333
2A
0.835A
±0.417
±0.333
2A
0.835A
±0.417
±0.333
A
VOLoad Capacitance
AEE01A12-M
AEE00B12-M
AEE00BB12-M
AEE00CC12-M
AEE02A24-M
AEE00B24-M
AEE00BB24-M
AEE00CC24-M
AEE02A48-M
AEE00B48-M
AEE00BB48-M
AEE00CC48-M
All
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1000
470
220
220
1000
470
220
220
1000
470
220
220
uF
Output Specifications
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 7
Technical Reference Note
Artesyn Embedded Technologies
Table 3. Output Specifications con’t:
Parameter Condition Symbol Min Nom Max Unit
VOLoad Capacitance
AEE01A12-M
AEE00B12-M
AEE00BB12-M
AEE00CC12-M
AEE02A24-M
AEE00B24-M
AEE00BB24-M
AEE00CC24-M
AEE02A48-M
AEE00B48-M
AEE00BB48-M
AEE00CC48-M
All
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1000
470
220
220
1000
470
220
220
1000
470
220
220
uF
Line Regulation VIN,DC=VIN,min to VIN,max ±%VO- 0.3 0.5 %
Load Regulation IO=IO,min to IO,max ±%VO- 0.5 1.2 %
Switching Frequency All fSW 120 150 180 KHz
VODynamic Response
Peak Deviation
Settling Time
25% load change ±%VO
ts
-
-
3
250
5
-
%
uSec
Temperature Coefficient All %/OC - 0.02 0.05 %
Output Over Current Protection1All %IO,max 120 150 - %
Output Short Circuit Protection All Hiccup Automatic Recovery
Note 1 - Hiccup Automatic Recovery
Output Specifications
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 8
Technical Reference Note
Artesyn Embedded Technologies
AEE01A12-M Performance Curves
Figure 4: AEE01A12-M Transient Response
Vin = 12Vdc Load: Io = 100% to 75% load change
Ch 1: Vo
Figure 1: AEE01A12-M Efficiency Versus Output Current Curve
Vin = 9 to 18Vdc Load: Io = 0 to 1.6A
Figure 2: AEE01A12-M Efficiency Versus Input Voltage Curve
Vin = 9 to 18Vdc Load: Io = 1.6A
Figure 3 AEE01A12-M Ripple and Noise Measurement
Vin = 12Vdc Load: Io = 1.6A
Ch 1: Vo
Figure 5: AEE01A12-M Output Voltage Startup Characteristic by Vin
Vin = 12Vdc Load: Io = 1.6A
Ch1: Vo Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
9V
12V
18V
50
60
70
80
90
9 12 18
Input Voltage(V)
E ffic ienc y(% )
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 9
Technical Reference Note
Artesyn Embedded Technologies
AEE01A12-M Performance Curves
Note - All test conditions are at 25 OC
Figure 6: AEE01A12-M Derating Curves (without heatsink)
Vin = 12Vdc Load: Io = 0 to 1.6A
Figure 7: AEE01A12-M Conduction Emission of EN550122 Class A
Vin = 12Vdc Load: Io = 1.6A
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 1108040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 10
Technical Reference Note
Artesyn Embedded Technologies
AEE00B12-M Performance Curves
Figure 11: AEE00B12-M Transient Response
Vin = 12Vdc Load: Io = 100% to 75% load change
Ch 1: Vo
Figure 8: AEE00B12-M Efficiency Versus Output Current Curve
Vin = 9 to 18Vdc Load: Io = 0 to 0.835A
Figure 9: AEE00B12-M Efficiency Versus Input Voltage Curve
Vin = 9 to 18Vdc Load: Io = 0.835A
Figure 10: AEE00B12-M Ripple and Noise Measurement
Vin = 12Vdc Load: Io = 0.835A
Ch 1: Vo
Figure 12: AEE00B12-M Output Voltage Startup Characteristic by Vin
Vin = 12Vdc Load: Io = 0.835A
Ch1: Vo Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
9V
12V
18V
50
60
70
80
90
9 12 18
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 11
Technical Reference Note
Artesyn Embedded Technologies
AEE00B12-M Performance Curves
Note - All test conditions are at 25 OC
Figure 13: AEE00B12-M Derating Curves (without heatsink)
Vin = 12Vdc Load: Io = 0 to 0.835A
Figure 14: AEE00B12-M Conduction Emission of EN550122 Class A
Vin = 12Vdc Load: Io = 0.835A
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 110
8040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 12
Technical Reference Note
Artesyn Embedded Technologies
AEE00BB12-M Performance Curves
Figure 18: AEE00BB12-M Transient Response
Vin = 12Vdc Load: Io = 100% to 75% load change
Ch 1: Vo1 Ch2: Vo2
Figure 15: AEE00BB12-M Efficiency Versus Output Current Curve
Vin = 9 to 18Vdc Load: Io = 0 to ±
±±
±0.417A
Figure 16: AEE00BB12-M Efficiency Versus Input Voltage Curve
Vin = 9 to 18Vdc Load: Io = ±
±±
±0.417
Figure 17: AEE00BB12-M Ripple and Noise Measurement
Vin = 12Vdc Load: Io = ±
±±
±0.417
Ch 1: Vo1 Ch2: Vo2
Figure 19: AEE00BB12-M Output Voltage Startup Characteristic by Vin
Vin = 12Vdc Load: Io = ±
±±
±0.417A
Ch1: Vo1 Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
9V
12V
18V
50
60
70
80
90
9 12 18
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 13
Technical Reference Note
Artesyn Embedded Technologies
AEE00BB12-M Performance Curves
Note - All test conditions are at 25 OC
Figure 20: AEE00BB12-M Derating Curves (without heatsink)
Vin = 12Vdc Load: Io = 0 to ±0.417
Figure 21: AEE00BB12-M Conduction Emission of EN550122 Class A
Vin = 12Vdc Load: Io = 1 ±0.417
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 110
8040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 14
Technical Reference Note
Artesyn Embedded Technologies
AEE00CC12-M Performance Curves
Figure 25: AEE00CC12-M Transient Response
Vin = 12Vdc Load: Io = 100% to 75% load change
Ch 1: Vo1 Ch2: Vo2
Figure 22: AEE00CC12-M Efficiency Versus Output Current Curve
Vin = 9 to 18Vdc Load: Io = 0 to ±
±±
±0.333
Figure 23: AEE00CC12-M Efficiency Versus Input Voltage Curve
Vin = 9 to 18Vdc Load: Io = ±
±±
±0.333
Figure 24: AEE00CC12-M Ripple and Noise Measurement
Vin = 12Vdc Load: Io = ±
±±
±0.333
Ch 1: Vo1 Ch2: Vo2
Figure 26: AEE00CC12-M Output Voltage Startup Characteristic by Vin
Vin = 12Vdc Load: Io = ±
±±
±0.333
Ch1: Vo1 Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
9V
12V
18V
50
60
70
80
90
9 12 18
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 15
Technical Reference Note
Artesyn Embedded Technologies
AEE00CC12-M Performance Curves
Note - All test conditions are at 25 OC
Figure 27: AEE00CC12-M Derating Curves (without heatsink)
Vin = 12Vdc Load: Io = 0 to ±0.333
Figure 28: AEE00CC12-M Conduction Emission of EN550122 Class A
Vin = 12Vdc Load: Io = ±0.333
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 1108040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 16
Technical Reference Note
Artesyn Embedded Technologies
AEE02A24-M Performance Curves
Figure 32: AEE02A24-M Transient Response
Vin = 24Vdc Load: Io = 100% to 75% load change
Ch 1: Vo
Figure 29: AEE02A24-M Efficiency Versus Output Current Curve
Vin = 18 to 36Vdc Load: Io = 0 to 2A
Figure 30: AEE02A24-M Efficiency Versus Input Voltage Curve
Vin = 18 to 36Vdc Load: Io = 2A
Figure 31: AEE02A24-M Ripple and Noise Measurement
Vin = 24Vdc Load: Io = 2A
Ch 1: Vo
Figure 33: AEE02A24-M Output Voltage Startup Characteristic by Vin
Vin = 24Vdc Load: Io = 2A
Ch1: Vo Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
E f fic ienc y (% )
18V
24V
36V
50
60
70
80
90
18 24 36
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 17
Technical Reference Note
Artesyn Embedded Technologies
AEE02A24-M Performance Curves
Note - All test conditions are at 25 OC
Figure 34: AEE02A24-M Derating Curves (without heatsink)
Vin = 24Vdc Load: Io = 0 to 2A
Figure 35: AEE02A24-M Conduction Emission of EN550122 Class A
Vin = 24Vdc Load: Io = 2A
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 1108040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 18
Technical Reference Note
Artesyn Embedded Technologies
AEE00B24-M Performance Curves
Figure 39: AEE00B24-M Transient Response
Vin = 24Vdc Load: Io = 100% to 75% load change
Ch 1: Vo
Figure 36: AEE00B24-M Efficiency Versus Output Current Curve
Vin = 18 to 36Vdc Load: Io = 0 to 0.835A
Figure 37: AEE00B24-M Efficiency Versus Input Voltage Curve
Vin = 18 to 36Vdc Load: Io = 0.835A
Figure 38: AEE00B24-M Ripple and Noise Measurement
Vin = 24Vdc Load: Io = 0.835A
Ch 1: Vo
Figure 40: AEE00B24-M Output Voltage Startup Characteristic by Vin
Vin = 24Vdc Load: Io = 0.835A
Ch1: Vo Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
18V
24V
36V
50
60
70
80
90
18 24 36
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 19
Technical Reference Note
Artesyn Embedded Technologies
AEE00B24-M Performance Curves
Note - All test conditions are at 25 OC
Figure 41: AEE00B24-M Derating Curves (without heatsink)
Vin = 24Vdc Load: Io = 0 to 0.835A
Figure 42: AEE00B24-M Conduction Emission of EN550122 Class A
Vin = 24Vdc Load: Io = 0.835A
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 110
8040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 20
Technical Reference Note
Artesyn Embedded Technologies
AEE00BB24-M Performance Curves
Figure 46: AEE00BB24-M Transient Response
Vin = 24Vdc Load: Io = 100% to 75% load change
Ch 1: Vo1 Ch2: Vo2
Figure 43: AEE00BB24-M Efficiency Versus Output Current Curve
Vin = 18 to 36Vdc Load: Io = 0 to ±
±±
±0.417A
Figure 44: AEE00BB24-M Efficiency Versus Input Voltage Curve
Vin = 18 to 36Vdc Load: Io = ±
±±
±0.417
Figure 45: AEE00BB24-M Ripple and Noise Measurement
Vin = 24Vdc Load: Io = ±
±±
±0.417
Ch 1: Vo1 Ch2: Vo2
Figure 47: AEE00BB24-M Output Voltage Startup Characteristic by Vin
Vin = 24Vdc Load: Io = ±
±±
±0.417A
Ch1: Vo1 Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
E ffic ie nc y (% )
18V
24V
36V
50
60
70
80
90
18 24 36
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 21
Technical Reference Note
Artesyn Embedded Technologies
AEE00BB24-M Performance Curves
Note - All test conditions are at 25 OC
Figure 48: AEE00BB24-M Derating Curves (without heatsink)
Vin = 24Vdc Load: Io = 0 to ±0.417
Figure 49: AEE00BB24-M Conduction Emission of EN550122 Class A
Vin = 24Vdc Load: Io = 1 ±0.417
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 1108040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 22
Technical Reference Note
Artesyn Embedded Technologies
AEE00CC24-M Performance Curves
Figure 53: AEE00CC24-M Transient Response
Vin = 12Vdc Load: Io = 100% to 75% load change
Ch 1: Vo1 Ch2: Vo2
Figure 50: AEE00CC24-M Efficiency Versus Output Current Curve
Vin = 18 to 36Vdc Load: Io = 0 to ±
±±
±0.333
Figure 51: AEE00CC24-M Efficiency Versus Input Voltage Curve
Vin = 18 to 36Vdc Load: Io = ±
±±
±0.333
Figure 52: AEE00CC24-M Ripple and Noise Measurement
Vin = 12Vdc Load: Io = ±
±±
±0.333
Ch 1: Vo1 Ch2: Vo2
Figure 54: AEE00CC24-M Output Voltage Startup Characteristic by Vin
Vin = 12Vdc Load: Io = ±
±±
±0.333
Ch1: Vo1 Ch2: Vin
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
18V
24V
36V
50
60
70
80
90
18 24 36
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 23
Technical Reference Note
Artesyn Embedded Technologies
AEE00CC24-M Performance Curves
Note - All test conditions are at 25 OC
Figure 55: AEE00CC24-M Derating Curves (without heatsink)
Vin = 24Vdc Load: Io = 0 to ±0.333
Figure 56: AEE00CC24-M Conduction Emission of EN550122 Class A
Vin = 24Vdc Load: Io = ±0.333
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 1108040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 24
Technical Reference Note
Artesyn Embedded Technologies
AEE02A48-M Performance Curves
Figure 60: AEE02A48-M Transient Response
Vin = 48Vdc Load: Io = 100% to 75% load change
Ch 1: Vo
Figure 57: AEE02A48-M Efficiency Versus Output Current Curve
Vin = 36 to 75Vdc Load: Io = 0 to 2A
Figure 58: AEE02A48-M Efficiency Versus Input Voltage Curve
Vin = 36 to 75Vdc Load: Io = 2A
Figure 59: AEE02A48-M Ripple and Noise Measurement
Vin = 48Vdc Load: Io = 2A
Ch 1: Vo
Figure 61: AEE02A48-M Output Voltage Startup Characteristic by Vin
Vin = 48Vdc Load: Io = 2A
Ch1: Vo Ch2: Vin
40
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
E ffic ienc y (% )
36V
48V
75V
50
60
70
80
90
36 49 75
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 25
Technical Reference Note
Artesyn Embedded Technologies
AEE02A48-M Performance Curves
Note - All test conditions are at 25 OC
Figure 62: AEE02A48-M Derating Curves (without heatsink)
Vin = 48Vdc Load: Io = 0 to 2A
Figure 63: AEE02A48-M Conduction Emission of EN550122 Class A
Vin = 48Vdc Load: Io = 2A
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 110
8040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 26
Technical Reference Note
Artesyn Embedded Technologies
AEE00B48-M Performance Curves
Figure 67: AEE00B48-M Transient Response
Vin = 48Vdc Load: Io = 100% to 75% load change
Ch 1: Vo
Figure 64: AEE00B48-M Efficiency Versus Output Current Curve
Vin = 36 to 75Vdc Load: Io = 0 to 0.835A
Figure 65: AEE00B48-M Efficiency Versus Input Voltage Curve
Vin = 36 to 75Vdc Load: Io = 0.835A
Figure 66: AEE00B24-M Ripple and Noise Measurement
Vin = 48Vdc Load: Io = 0.835A
Ch 1: Vo
Figure 68: AEE00B48-M Output Voltage Startup Characteristic by Vin
Vin = 48Vdc Load: Io = 0.835A
Ch1: Vo Ch2: Vin
40
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
36V
48V
75V
50
60
70
80
90
36 49 75
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 27
Technical Reference Note
Artesyn Embedded Technologies
AEE00B48-M Performance Curves
Note - All test conditions are at 25 OC
Figure 69: AEE00B48-M Derating Curves (without heatsink)
Vin = 48Vdc Load: Io = 0 to 0.835A
Figure 70: AEE00B48-M Conduction Emission of EN550122 Class A
Vin = 48Vdc Load: Io = 0.835A
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 110
8040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 28
Technical Reference Note
Artesyn Embedded Technologies
AEE00BB48-M Performance Curves
Figure 74: AEE00BB48-M Transient Response
Vin = 48Vdc Load: Io = 100% to 75% load change
Ch 1: Vo1 Ch2: Vo2
Figure 71: AEE00BB48-M Efficiency Versus Output Current Curve
Vin = 36 to 75Vdc Load: Io = 0 to ±
±±
±0.417A
Figure 72: AEE00BB48-M Efficiency Versus Input Voltage Curve
Vin = 36 to 75Vdc Load: Io = ±
±±
±0.417
Figure 73: AEE00BB48-M Ripple and Noise Measurement
Vin = 48Vdc Load: Io = ±
±±
±0.417
Ch 1: Vo1 Ch2: Vo2
Figure 75: AEE00BB48-M Output Voltage Startup Characteristic by Vin
Vin = 48Vdc Load: Io = ±
±±
±0.417A
Ch1: Vo1 Ch2: Vin
40
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
36V
48V
75V
50
60
70
80
90
36 49 75
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 29
Technical Reference Note
Artesyn Embedded Technologies
AEE00BB48-M Performance Curves
Note - All test conditions are at 25 OC
Figure 76: AEE00BB48-M Derating Curves (without heatsink)
Vin = 48Vdc Load: Io = 0 to ±0.417
Figure 77: AEE00BB48-M Conduction Emission of EN550122 Class A
Vin = 48Vdc Load: Io = 1 ±0.417
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 1108040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 30
Technical Reference Note
Artesyn Embedded Technologies
AEE00CC48-M Performance Curves
Figure 81: AEE00CC48-M Transient Response
Vin = 48Vdc Load: Io = 100% to 75% load change
Ch 1: Vo1 Ch2: Vo2
Figure 78: AEE00CC48-M Efficiency Versus Output Current Curve
Vin = 36 to 75Vdc Load: Io = 0 to ±
±±
±0.333
Figure 79: AEE00CC48-M Efficiency Versus Input Voltage Curve
Vin = 36 to 75Vdc Load: Io = ±
±±
±0.333
Figure 80: AEE00CC48-M Ripple and Noise Measurement
Vin = 48Vdc Load: Io = ±
±±
±0.333
Ch 1: Vo1 Ch2: Vo2
Figure 82: AEE00CC48-M Output Voltage Startup Characteristic by Vin
Vin = 48Vdc Load: Io = ±
±±
±0.333
Ch1: Vo1 Ch2: Vin
40
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100
% of Full Load
Efficiency(%)
36V
48V
75V
50
60
70
80
90
36 49 75
Input Voltage(V)
Efficiency(%)
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 31
Technical Reference Note
Artesyn Embedded Technologies
AEE00CC48-M Performance Curves
Note - All test conditions are at 25 OC
Figure 83: AEE00CC48-M Derating Curves (without heatsink)
Vin = 48Vdc Load: Io = 0 to ±0.333
Figure 84: AEE00CC48-M Conduction Emission of EN550122 Class A
Vin = 48Vdc Load: Io = ±0.333
~
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 1108040
400LFM
200LFM
100LFM
Natural
Convection
20LFM
C
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 32
Technical Reference Note
Artesyn Embedded Technologies
Mechanical Specifications
Mechanical Outlines
Note:
1.All dimensions in mm (inches)
2.Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
3.Pin diameter 1.0 ±0.05 (0.04±0.002)
Pin Connections
Single output
Pin 1 – +Vin
Pin 2 – -Vin
Pin 3 – +Vout
Pin 4 – No Pin
Pin 5 – -Vout
Dual Output
Pin 1 – +Vin
Pin 2 – -Vin
Pin 3 – +Vout
Pin 4 – Common
Pin 5 – -Vout
10.16
25.4 [1.00]
[0.40]
10.16
[0.40]
2.54
[0.10]
5.08
[0.20]
Bottom View
45.72 [1.80]
50.8 [2.00]
1.00 [0.04]
5 4
12
3
5.08
[0.20]
12.0
[0.47]
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 33
Technical Reference Note
Artesyn Embedded Technologies
Recommended Pad Layout
3
Top View
45
12
45.72 [1.80]
50.8 [2.0]
[0.20]
5.08
10.16
[0.40]
10.16
[0.40]
5X 2.0 0.1(PAD)[5X 0.08 0.004 ]
25.4 [1.00]
5X 1.3 0.1(HOLE)[5X 0.05 0.004]
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 34
Technical Reference Note
Artesyn Embedded Technologies
Environmental Specifications
EMC Immunity
AEE10W-M series power supply is designed to meet the following EMC immunity specifications.
Table 4. EMC Specifications:
Parameter Standards & Level Performance
EMI EN55022 Class A
ESD EN61000-4-2 air ±8KV , Contact ±6KV Perf. Criteria A
Radiated immunity EN61000-4-3 10V/m Perf. Criteria A
Fast transient1EN61000-4-4 ±2KV Perf. Criteria A
Surge1EN61000-4-5 ±1KV Perf. Criteria A
Conducted immunity EN61000-4-6 10Vrms Perf. Criteria A
Note 1 - AEE10W-M series can meet EN61000-4-4 & EN61000-4-5 by adding a capacitor across the input pins. Suggested capacitor:
CHEMI-CON KY 220uF/100V
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 35
Technical Reference Note
Artesyn Embedded Technologies
Safety Certifications
The AEE10W-M series power supply is intended for inclusion in other equipment and the installer must ensure that it is in
compliance with all the requirements of the end application. This product is only for inclusion by professional installers
within other equipment and must not be operated as a stand alone product.
Table 5. Safety Certifications for AEE10W-M series power supply system
Document Description
cUL/UL 60950-1 (CSA certificate) US and Canada Requirements
IEC/EN 60950-1 (CB-scheme) European Requirements (All CENELEC Countries)
UL60601-1 US Medical Requirements
IEC/EN 60950-1, IEC/EN 60601-1
3rd Edition, 2 MOOP International and European Medical Requirements
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 36
Technical Reference Note
Artesyn Embedded Technologies
Operating Temperature
Table 6. Operating Temperature:
Parameter Model / Condition Min Max Unit
Operating Temperature Range
(Natural Convection1, See Derating) All -40 +85 OC
Operating Case Temperature All -+95 OC
Thermal Protection Shutdown
Temperature -110 OC
Storage Temperature Range -50 +125 OC
Humidity (non condensing) -95 %
Altitude -4000 m
Cooling Free-Air convection
Lead Temperature (1.5mm from case for
10Sec.) - 260 OC
Note1 - The “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 37
Technical Reference Note
Artesyn Embedded Technologies
MTBF and Reliability
The MTBF of AEE10W-M series of DC/DC converters has been calculated using MIL-HDBK 217F NOTICE2, Operating
Temperature 25 OC, Ground Benign.
Model MTBF Unit
AEE01A12-M 1040000
Hours
AEE00B12-M 1320000
AEE00BB12-M 1140000
AEE00CC12-M 1290000
AEE02A24-M 1000000
AEE00B24-M 1310000
AEE00BB24-M 1380000
AEE00CC24-M 1530000
AEE02A48-M 1100000
AEE00B48-M 1080000
AEE00BB48-M 1050000
AEE00CC48-M 1380000
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 38
Technical Reference Note
Artesyn Embedded Technologies
Application Notes
Input Reflected-Ripple Current Test Setup
Input reflected-ripple current is measured with a inductor Lin (4.7µH) and Cin (220uF, ESR < 1.0Ω at 100 KHz) to simulate
source impedance. Capacitor Cin, offsets possible battery impedance. Current ripple is measured at the input terminals of
the module, measurement bandwidth is 0-500 KHz.
.
Component Value Reference
Lin 4.7µH -
Cin 220uF (ESR<1.0Ω at 100KHz) Aluminum Electrolytic Capacitor
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 39
Technical Reference Note
Artesyn Embedded Technologies
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise
performance. To reduce output ripple, it is recommended to use 3.3uF capacitors at the output.
Peak-to-Peak Output Noise Measurement Test
Use a 0.47uF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth
is 0-20MHz. Position the load between 50 mm and 75 mm from the DC/DC Converter
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 40
Technical Reference Note
Artesyn Embedded Technologies
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can
affect the stability of the power module.
In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor
at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality
low Equivalent Series Resistance (ESR < 1.0Ω at 100 KHz) capacitor of a 10uFfor the 24V and 48V devices.
Output Over Current Protection
To provide hiccup mode protection in a fault (output overload) condition, the unit is equipped with internal current limiting
circuitry and can endure overload for an unlimited duration.
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and
board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case
temperature must be kept below 95 OC. The derating curves are determined from measurements obtained in a test setup.
Maximum Capacitive Load
The AEE10W-M series has limitation of maximum connected capacitance at the output. The power module may be
operated in current limiting mode during start-up, affecting the ramp-up and the startup time. The maximum capacitance
can be found in the Table 3.
+
+Out
-Out
+Vin
-Vin
DC / DC
Converter Load
DC Power
Source
+
-
Cin
DUT
Position of air velocity
probe and thermocouple 50mm / 2in Air Flow
15mm / 0.6in
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 41
Technical Reference Note
Artesyn Embedded Technologies
Packaging Information
Soldering and Reflow Considerations
Lead free wave solder profile for AEE10W -M Series
Reference Solder: Sn-Ag-Cu：Sn-Cu：Sn-Ag
Hand Welding: Soldering iron：Power 10W
Welding Time: 2~4 sec
Temp.: 380~400 OC
Zone Reference Parameter
Preheat zone
Rise temp speed：3OC/sec max.
Preheat temp : 100~130OC
Actual heating Peak temp: 250~260OC Peak Time
Peak time(T1+T2)：4~6 sec
Technical Reference Note
Rev.02.13.15_#1.3
AEE10W-M Series
Page 42
Technical Reference Note
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
