Surface Mount Rectifier Features: * * * * * * Plastic Package For Surface Mounted Applications Low Profile Package Built-In Strain Relief, Ideal for Automated Placement High Temperature Soldering : 250C/10 seconds at Terminals High Current Capability Mechanical Data * * * * Case : JEDEC DO-214AA molded plastic over passivated chip Terminals : Solder plated, solderable per MIL-STD-750, method 2026 Polarity : Colour band denotes cathode end Weight : 0.003oz, 0.093g Maximum Ratings and Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified Characteristic Symbol S3DB-13-F S3GB-13-F S3MB-13-F Units Maximum repetitive peak reverse voltage VRRM 200 400 1,000 V Maximum RMS voltage VRWS 140 280 700 V Maximum DC blocking voltage VDC 200 400 1,000 V Maximum average forward rectified current at TL=90C IF(AV) 3 A Peak forward surge current at TL = 110C 8.3 ms single half-sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Maximum Instantaneous Forward Voltage at 3A VF 1.15 V Maximum DC reverse current TA=25C at rated DC blocking voltage TA=100C IR 10 100 A Typical junction capacitance (Note 1) CJ 35 pF RJA 40 C/W TJ, TSTG -55 to +150 C Typical thermal resistance (Note 2) Operating junction and storage temperature range Note: (1) Measured at 1MHz and applied reverse voltage of 4V (2) Thermal resistance from junction to ambient and junction to lead PCB mounted on 0.27 x 0.27 (7 x 7mm2) copper pad areas www.element14.com www.farnell.com www.newark.com Page <1> 26/02/13 V1.0 Surface Mount Rectifier www.element14.com www.farnell.com www.newark.com Page <2> 26/02/13 V1.0 Surface Mount Rectifier Package Outline Dimensions DO-214AC(SMA) Dim. Min. Max. A 4.3 4.7 B 3.3 3.7 C 2 2.3 D 5.05 5.55 E 0.2 Typ. F 0.95 G 1.55 0.2 Max. H 2.1 2.5 I 1.85 2.15 Dimensions : Millimetres Soldering Footprint Package Information Device S3DB -13-F S3GB -13-F S3MB -13-F Package Shipping DO-214AA(SMB) 3,000 / Tape & Reel Dimensions : Millimetres Part Number Table Description Part Number Surface Mount Rectifier S3GB-13-F S3DB-13-F S3MB-13-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 26/02/13 V1.0